程序包 istio.networking.v1alpha3

接口 WorkloadEntryOuterClass.WorkloadEntryOrBuilder

    • 方法概要

      所有方法 实例方法 抽象方法 已过时的方法 
      修饰符和类型 方法 说明
      boolean containsLabels​(java.lang.String key)
      One or more labels associated with the endpoint.
      boolean containsPorts​(java.lang.String key)
      Set of ports associated with the endpoint.
      java.lang.String getAddress()
      Address associated with the network endpoint without the port.
      com.google.protobuf.ByteString getAddressBytes()
      Address associated with the network endpoint without the port.
      java.util.Map<java.lang.String,​java.lang.String> getLabels()
      已过时。
      int getLabelsCount()
      One or more labels associated with the endpoint.
      java.util.Map<java.lang.String,​java.lang.String> getLabelsMap()
      One or more labels associated with the endpoint.
      java.lang.String getLabelsOrDefault​(java.lang.String key, java.lang.String defaultValue)
      One or more labels associated with the endpoint.
      java.lang.String getLabelsOrThrow​(java.lang.String key)
      One or more labels associated with the endpoint.
      java.lang.String getLocality()
      The locality associated with the endpoint.
      com.google.protobuf.ByteString getLocalityBytes()
      The locality associated with the endpoint.
      java.lang.String getNetwork()
      Network enables Istio to group endpoints resident in the same L3 domain/network.
      com.google.protobuf.ByteString getNetworkBytes()
      Network enables Istio to group endpoints resident in the same L3 domain/network.
      java.util.Map<java.lang.String,​java.lang.Integer> getPorts()
      已过时。
      int getPortsCount()
      Set of ports associated with the endpoint.
      java.util.Map<java.lang.String,​java.lang.Integer> getPortsMap()
      Set of ports associated with the endpoint.
      int getPortsOrDefault​(java.lang.String key, int defaultValue)
      Set of ports associated with the endpoint.
      int getPortsOrThrow​(java.lang.String key)
      Set of ports associated with the endpoint.
      java.lang.String getServiceAccount()
      The service account associated with the workload if a sidecar is present in the workload.
      com.google.protobuf.ByteString getServiceAccountBytes()
      The service account associated with the workload if a sidecar is present in the workload.
      int getWeight()
      The load balancing weight associated with the endpoint.

      • 从接口继承的方法 com.google.protobuf.MessageLiteOrBuilder

        isInitialized

      • 从接口继承的方法 com.google.protobuf.MessageOrBuilder

        findInitializationErrors, getAllFields, getDefaultInstanceForType, getDescriptorForType, getField, getInitializationErrorString, getOneofFieldDescriptor, getRepeatedField, getRepeatedFieldCount, getUnknownFields, hasField, hasOneof

    • 方法详细资料

      • getAddress

        java.lang.String getAddress()
         Address associated with the network endpoint without the
 port.  Domain names can be used if and only if the resolution is set
 to DNS, and must be fully-qualified without wildcards. Use the form
 unix:///absolute/path/to/socket for Unix domain socket endpoints.
        string address = 1 [(.google.api.field_behavior) = REQUIRED];
        返回:
        The address.

      • getAddressBytes

        com.google.protobuf.ByteString getAddressBytes()
         Address associated with the network endpoint without the
 port.  Domain names can be used if and only if the resolution is set
 to DNS, and must be fully-qualified without wildcards. Use the form
 unix:///absolute/path/to/socket for Unix domain socket endpoints.
        string address = 1 [(.google.api.field_behavior) = REQUIRED];
        返回:
        The bytes for address.

      • getPortsCount

        int getPortsCount()
         Set of ports associated with the endpoint. If the port map is
 specified, it must be a map of servicePortName to this endpoint's
 port, such that traffic to the service port will be forwarded to
 the endpoint port that maps to the service's portName. If
 omitted, and the targetPort is specified as part of the service's
 port specification, traffic to the service port will be forwarded
 to one of the endpoints on the specified `targetPort`. If both
 the targetPort and endpoint's port map are not specified, traffic
 to a service port will be forwarded to one of the endpoints on
 the same port.
 **NOTE 1:** Do not use for `unix://` addresses.
 **NOTE 2:** endpoint port map takes precedence over targetPort.
        map<string, uint32> ports = 2;

      • containsPorts

        boolean containsPorts​(java.lang.String key)
         Set of ports associated with the endpoint. If the port map is
 specified, it must be a map of servicePortName to this endpoint's
 port, such that traffic to the service port will be forwarded to
 the endpoint port that maps to the service's portName. If
 omitted, and the targetPort is specified as part of the service's
 port specification, traffic to the service port will be forwarded
 to one of the endpoints on the specified `targetPort`. If both
 the targetPort and endpoint's port map are not specified, traffic
 to a service port will be forwarded to one of the endpoints on
 the same port.
 **NOTE 1:** Do not use for `unix://` addresses.
 **NOTE 2:** endpoint port map takes precedence over targetPort.
        map<string, uint32> ports = 2;

      • getPorts

        @Deprecated
java.util.Map<java.lang.String,​java.lang.Integer> getPorts()
        已过时。
        Use getPortsMap() instead.

      • getPortsMap

        java.util.Map<java.lang.String,​java.lang.Integer> getPortsMap()
         Set of ports associated with the endpoint. If the port map is
 specified, it must be a map of servicePortName to this endpoint's
 port, such that traffic to the service port will be forwarded to
 the endpoint port that maps to the service's portName. If
 omitted, and the targetPort is specified as part of the service's
 port specification, traffic to the service port will be forwarded
 to one of the endpoints on the specified `targetPort`. If both
 the targetPort and endpoint's port map are not specified, traffic
 to a service port will be forwarded to one of the endpoints on
 the same port.
 **NOTE 1:** Do not use for `unix://` addresses.
 **NOTE 2:** endpoint port map takes precedence over targetPort.
        map<string, uint32> ports = 2;

      • getPortsOrDefault

        int getPortsOrDefault​(java.lang.String key,
                      int defaultValue)
         Set of ports associated with the endpoint. If the port map is
 specified, it must be a map of servicePortName to this endpoint's
 port, such that traffic to the service port will be forwarded to
 the endpoint port that maps to the service's portName. If
 omitted, and the targetPort is specified as part of the service's
 port specification, traffic to the service port will be forwarded
 to one of the endpoints on the specified `targetPort`. If both
 the targetPort and endpoint's port map are not specified, traffic
 to a service port will be forwarded to one of the endpoints on
 the same port.
 **NOTE 1:** Do not use for `unix://` addresses.
 **NOTE 2:** endpoint port map takes precedence over targetPort.
        map<string, uint32> ports = 2;

      • getPortsOrThrow

        int getPortsOrThrow​(java.lang.String key)
         Set of ports associated with the endpoint. If the port map is
 specified, it must be a map of servicePortName to this endpoint's
 port, such that traffic to the service port will be forwarded to
 the endpoint port that maps to the service's portName. If
 omitted, and the targetPort is specified as part of the service's
 port specification, traffic to the service port will be forwarded
 to one of the endpoints on the specified `targetPort`. If both
 the targetPort and endpoint's port map are not specified, traffic
 to a service port will be forwarded to one of the endpoints on
 the same port.
 **NOTE 1:** Do not use for `unix://` addresses.
 **NOTE 2:** endpoint port map takes precedence over targetPort.
        map<string, uint32> ports = 2;

      • getLabelsCount

        int getLabelsCount()
         One or more labels associated with the endpoint.
        map<string, string> labels = 3;

      • containsLabels

        boolean containsLabels​(java.lang.String key)
         One or more labels associated with the endpoint.
        map<string, string> labels = 3;

      • getLabels

        @Deprecated
java.util.Map<java.lang.String,​java.lang.String> getLabels()
        已过时。
        Use getLabelsMap() instead.

      • getLabelsMap

        java.util.Map<java.lang.String,​java.lang.String> getLabelsMap()
         One or more labels associated with the endpoint.
        map<string, string> labels = 3;

      • getLabelsOrDefault

        java.lang.String getLabelsOrDefault​(java.lang.String key,
                                    java.lang.String defaultValue)
         One or more labels associated with the endpoint.
        map<string, string> labels = 3;

      • getLabelsOrThrow

        java.lang.String getLabelsOrThrow​(java.lang.String key)
         One or more labels associated with the endpoint.
        map<string, string> labels = 3;

      • getNetwork

        java.lang.String getNetwork()
         Network enables Istio to group endpoints resident in the same L3
 domain/network. All endpoints in the same network are assumed to be
 directly reachable from one another. When endpoints in different
 networks cannot reach each other directly, an Istio Gateway can be
 used to establish connectivity (usually using the
 `AUTO_PASSTHROUGH` mode in a Gateway Server). This is
 an advanced configuration used typically for spanning an Istio mesh
 over multiple clusters.
        string network = 4;
        返回:
        The network.

      • getNetworkBytes

        com.google.protobuf.ByteString getNetworkBytes()
         Network enables Istio to group endpoints resident in the same L3
 domain/network. All endpoints in the same network are assumed to be
 directly reachable from one another. When endpoints in different
 networks cannot reach each other directly, an Istio Gateway can be
 used to establish connectivity (usually using the
 `AUTO_PASSTHROUGH` mode in a Gateway Server). This is
 an advanced configuration used typically for spanning an Istio mesh
 over multiple clusters.
        string network = 4;
        返回:
        The bytes for network.

      • getLocality

        java.lang.String getLocality()
         The locality associated with the endpoint. A locality corresponds
 to a failure domain (e.g., country/region/zone). Arbitrary failure
 domain hierarchies can be represented by separating each
 encapsulating failure domain by /. For example, the locality of an
 an endpoint in US, in US-East-1 region, within availability zone
 az-1, in data center rack r11 can be represented as
 us/us-east-1/az-1/r11. Istio will configure the sidecar to route to
 endpoints within the same locality as the sidecar. If none of the
 endpoints in the locality are available, endpoints parent locality
 (but within the same network ID) will be chosen. For example, if
 there are two endpoints in same network (networkID "n1"), say e1
 with locality us/us-east-1/az-1/r11 and e2 with locality
 us/us-east-1/az-2/r12, a sidecar from us/us-east-1/az-1/r11 locality
 will prefer e1 from the same locality over e2 from a different
 locality. Endpoint e2 could be the IP associated with a gateway
 (that bridges networks n1 and n2), or the IP associated with a
 standard service endpoint.
        string locality = 5;
        返回:
        The locality.

      • getLocalityBytes

        com.google.protobuf.ByteString getLocalityBytes()
         The locality associated with the endpoint. A locality corresponds
 to a failure domain (e.g., country/region/zone). Arbitrary failure
 domain hierarchies can be represented by separating each
 encapsulating failure domain by /. For example, the locality of an
 an endpoint in US, in US-East-1 region, within availability zone
 az-1, in data center rack r11 can be represented as
 us/us-east-1/az-1/r11. Istio will configure the sidecar to route to
 endpoints within the same locality as the sidecar. If none of the
 endpoints in the locality are available, endpoints parent locality
 (but within the same network ID) will be chosen. For example, if
 there are two endpoints in same network (networkID "n1"), say e1
 with locality us/us-east-1/az-1/r11 and e2 with locality
 us/us-east-1/az-2/r12, a sidecar from us/us-east-1/az-1/r11 locality
 will prefer e1 from the same locality over e2 from a different
 locality. Endpoint e2 could be the IP associated with a gateway
 (that bridges networks n1 and n2), or the IP associated with a
 standard service endpoint.
        string locality = 5;
        返回:
        The bytes for locality.

      • getWeight

        int getWeight()
         The load balancing weight associated with the endpoint. Endpoints
 with higher weights will receive proportionally higher traffic.
        uint32 weight = 6;
        返回:
        The weight.

      • getServiceAccount

        java.lang.String getServiceAccount()
         The service account associated with the workload if a sidecar
 is present in the workload. The service account must be present
 in the same namespace as the configuration ( WorkloadEntry or a
 ServiceEntry)
        string service_account = 7;
        返回:
        The serviceAccount.

      • getServiceAccountBytes

        com.google.protobuf.ByteString getServiceAccountBytes()
         The service account associated with the workload if a sidecar
 is present in the workload. The service account must be present
 in the same namespace as the configuration ( WorkloadEntry or a
 ServiceEntry)
        string service_account = 7;
        返回:
        The bytes for serviceAccount.