程序包 istio.networking.v1alpha3

接口 SidecarOuterClass.IstioEgressListenerOrBuilder

    • 方法概要

      所有方法 实例方法 抽象方法 
      修饰符和类型 方法 说明
      java.lang.String getBind()
      The IP or the Unix domain socket to which the listener should be bound to.
      com.google.protobuf.ByteString getBindBytes()
      The IP or the Unix domain socket to which the listener should be bound to.
      SidecarOuterClass.CaptureMode getCaptureMode()
      When the bind address is an IP, the captureMode option dictates how traffic to the listener is expected to be captured (or not).
      int getCaptureModeValue()
      When the bind address is an IP, the captureMode option dictates how traffic to the listener is expected to be captured (or not).
      java.lang.String getHosts​(int index)
      One or more service hosts exposed by the listener in `namespace/dnsName` format.
      com.google.protobuf.ByteString getHostsBytes​(int index)
      One or more service hosts exposed by the listener in `namespace/dnsName` format.
      int getHostsCount()
      One or more service hosts exposed by the listener in `namespace/dnsName` format.
      java.util.List<java.lang.String> getHostsList()
      One or more service hosts exposed by the listener in `namespace/dnsName` format.
      GatewayOuterClass.Port getPort()
      The port associated with the listener.
      GatewayOuterClass.PortOrBuilder getPortOrBuilder()
      The port associated with the listener.
      boolean hasPort()
      The port associated with the listener.

      • 从接口继承的方法 com.google.protobuf.MessageLiteOrBuilder

        isInitialized

      • 从接口继承的方法 com.google.protobuf.MessageOrBuilder

        findInitializationErrors, getAllFields, getDefaultInstanceForType, getDescriptorForType, getField, getInitializationErrorString, getOneofFieldDescriptor, getRepeatedField, getRepeatedFieldCount, getUnknownFields, hasField, hasOneof

    • 方法详细资料

      • hasPort

        boolean hasPort()
         The port associated with the listener. If using Unix domain socket,
 use 0 as the port number, with a valid protocol. The port if
 specified, will be used as the default destination port associated
 with the imported hosts. If the port is omitted, Istio will infer the
 listener ports based on the imported hosts. Note that when multiple
 egress listeners are specified, where one or more listeners have
 specific ports while others have no port, the hosts exposed on a
 listener port will be based on the listener with the most specific
 port.
        .istio.networking.v1alpha3.Port port = 1;
        返回:
        Whether the port field is set.

      • getPort

        GatewayOuterClass.Port getPort()
         The port associated with the listener. If using Unix domain socket,
 use 0 as the port number, with a valid protocol. The port if
 specified, will be used as the default destination port associated
 with the imported hosts. If the port is omitted, Istio will infer the
 listener ports based on the imported hosts. Note that when multiple
 egress listeners are specified, where one or more listeners have
 specific ports while others have no port, the hosts exposed on a
 listener port will be based on the listener with the most specific
 port.
        .istio.networking.v1alpha3.Port port = 1;
        返回:
        The port.

      • getPortOrBuilder

        GatewayOuterClass.PortOrBuilder getPortOrBuilder()
         The port associated with the listener. If using Unix domain socket,
 use 0 as the port number, with a valid protocol. The port if
 specified, will be used as the default destination port associated
 with the imported hosts. If the port is omitted, Istio will infer the
 listener ports based on the imported hosts. Note that when multiple
 egress listeners are specified, where one or more listeners have
 specific ports while others have no port, the hosts exposed on a
 listener port will be based on the listener with the most specific
 port.
        .istio.networking.v1alpha3.Port port = 1;

      • getBind

        java.lang.String getBind()
         The IP or the Unix domain socket to which the listener should be bound
 to. Port MUST be specified if bind is not empty. Format: `x.x.x.x` or
 `unix:///path/to/uds` or `unix://@foobar` (Linux abstract namespace). If
 omitted, Istio will automatically configure the defaults based on imported
 services, the workload instances to which this configuration is applied to and
 the captureMode. If captureMode is `NONE`, bind will default to
 127.0.0.1.
        string bind = 2;
        返回:
        The bind.

      • getBindBytes

        com.google.protobuf.ByteString getBindBytes()
         The IP or the Unix domain socket to which the listener should be bound
 to. Port MUST be specified if bind is not empty. Format: `x.x.x.x` or
 `unix:///path/to/uds` or `unix://@foobar` (Linux abstract namespace). If
 omitted, Istio will automatically configure the defaults based on imported
 services, the workload instances to which this configuration is applied to and
 the captureMode. If captureMode is `NONE`, bind will default to
 127.0.0.1.
        string bind = 2;
        返回:
        The bytes for bind.

      • getCaptureModeValue

        int getCaptureModeValue()
         When the bind address is an IP, the captureMode option dictates
 how traffic to the listener is expected to be captured (or not).
 captureMode must be DEFAULT or `NONE` for Unix domain socket binds.
        .istio.networking.v1alpha3.CaptureMode capture_mode = 3;
        返回:
        The enum numeric value on the wire for captureMode.

      • getCaptureMode

        SidecarOuterClass.CaptureMode getCaptureMode()
         When the bind address is an IP, the captureMode option dictates
 how traffic to the listener is expected to be captured (or not).
 captureMode must be DEFAULT or `NONE` for Unix domain socket binds.
        .istio.networking.v1alpha3.CaptureMode capture_mode = 3;
        返回:
        The captureMode.

      • getHostsList

        java.util.List<java.lang.String> getHostsList()
         One or more service hosts exposed by the listener
 in `namespace/dnsName` format. Services in the specified namespace
 matching `dnsName` will be exposed.
 The corresponding service can be a service in the service registry
 (e.g., a Kubernetes or cloud foundry service) or a service specified
 using a `ServiceEntry` or `VirtualService` configuration. Any
 associated `DestinationRule` in the same namespace will also be used.
 The `dnsName` should be specified using FQDN format, optionally including
 a wildcard character in the left-most component (e.g., `prod/*.example.com`).
 Set the `dnsName` to `*` to select all services from the specified namespace
 (e.g., `prod/*`).
 The `namespace` can be set to `*`, `.`, or `~`, representing any, the current,
 or no namespace, respectively. For example, `*/foo.example.com` selects the
 service from any available namespace while `./foo.example.com` only selects
 the service from the namespace of the sidecar. If a host is set to `*/*`,
 Istio will configure the sidecar to be able to reach every service in the
 mesh that is exported to the sidecar's namespace. The value `~/*` can be used
 to completely trim the configuration for sidecars that simply receive traffic
 and respond, but make no outbound connections of their own.
 NOTE: Only services and configuration artifacts exported to the sidecar's
 namespace (e.g., `exportTo` value of `*`) can be referenced.
 Private configurations (e.g., `exportTo` set to `.`) will
 not be available. Refer to the `exportTo` setting in `VirtualService`,
 `DestinationRule`, and `ServiceEntry` configurations for details.
 **WARNING:** The list of egress hosts in a `Sidecar` must also include
 the Mixer control plane services if they are enabled. Envoy will not
 be able to reach them otherwise. For example, add host
 `istio-system/istio-telemetry.istio-system.svc.cluster.local` if telemetry
 is enabled, `istio-system/istio-policy.istio-system.svc.cluster.local` if
 policy is enabled, or add `istio-system/*` to allow all services in the
 `istio-system` namespace. This requirement is temporary and will be removed
 in a future Istio release.
        repeated string hosts = 4 [(.google.api.field_behavior) = REQUIRED];
        返回:
        A list containing the hosts.

      • getHostsCount

        int getHostsCount()
         One or more service hosts exposed by the listener
 in `namespace/dnsName` format. Services in the specified namespace
 matching `dnsName` will be exposed.
 The corresponding service can be a service in the service registry
 (e.g., a Kubernetes or cloud foundry service) or a service specified
 using a `ServiceEntry` or `VirtualService` configuration. Any
 associated `DestinationRule` in the same namespace will also be used.
 The `dnsName` should be specified using FQDN format, optionally including
 a wildcard character in the left-most component (e.g., `prod/*.example.com`).
 Set the `dnsName` to `*` to select all services from the specified namespace
 (e.g., `prod/*`).
 The `namespace` can be set to `*`, `.`, or `~`, representing any, the current,
 or no namespace, respectively. For example, `*/foo.example.com` selects the
 service from any available namespace while `./foo.example.com` only selects
 the service from the namespace of the sidecar. If a host is set to `*/*`,
 Istio will configure the sidecar to be able to reach every service in the
 mesh that is exported to the sidecar's namespace. The value `~/*` can be used
 to completely trim the configuration for sidecars that simply receive traffic
 and respond, but make no outbound connections of their own.
 NOTE: Only services and configuration artifacts exported to the sidecar's
 namespace (e.g., `exportTo` value of `*`) can be referenced.
 Private configurations (e.g., `exportTo` set to `.`) will
 not be available. Refer to the `exportTo` setting in `VirtualService`,
 `DestinationRule`, and `ServiceEntry` configurations for details.
 **WARNING:** The list of egress hosts in a `Sidecar` must also include
 the Mixer control plane services if they are enabled. Envoy will not
 be able to reach them otherwise. For example, add host
 `istio-system/istio-telemetry.istio-system.svc.cluster.local` if telemetry
 is enabled, `istio-system/istio-policy.istio-system.svc.cluster.local` if
 policy is enabled, or add `istio-system/*` to allow all services in the
 `istio-system` namespace. This requirement is temporary and will be removed
 in a future Istio release.
        repeated string hosts = 4 [(.google.api.field_behavior) = REQUIRED];
        返回:
        The count of hosts.

      • getHosts

        java.lang.String getHosts​(int index)
         One or more service hosts exposed by the listener
 in `namespace/dnsName` format. Services in the specified namespace
 matching `dnsName` will be exposed.
 The corresponding service can be a service in the service registry
 (e.g., a Kubernetes or cloud foundry service) or a service specified
 using a `ServiceEntry` or `VirtualService` configuration. Any
 associated `DestinationRule` in the same namespace will also be used.
 The `dnsName` should be specified using FQDN format, optionally including
 a wildcard character in the left-most component (e.g., `prod/*.example.com`).
 Set the `dnsName` to `*` to select all services from the specified namespace
 (e.g., `prod/*`).
 The `namespace` can be set to `*`, `.`, or `~`, representing any, the current,
 or no namespace, respectively. For example, `*/foo.example.com` selects the
 service from any available namespace while `./foo.example.com` only selects
 the service from the namespace of the sidecar. If a host is set to `*/*`,
 Istio will configure the sidecar to be able to reach every service in the
 mesh that is exported to the sidecar's namespace. The value `~/*` can be used
 to completely trim the configuration for sidecars that simply receive traffic
 and respond, but make no outbound connections of their own.
 NOTE: Only services and configuration artifacts exported to the sidecar's
 namespace (e.g., `exportTo` value of `*`) can be referenced.
 Private configurations (e.g., `exportTo` set to `.`) will
 not be available. Refer to the `exportTo` setting in `VirtualService`,
 `DestinationRule`, and `ServiceEntry` configurations for details.
 **WARNING:** The list of egress hosts in a `Sidecar` must also include
 the Mixer control plane services if they are enabled. Envoy will not
 be able to reach them otherwise. For example, add host
 `istio-system/istio-telemetry.istio-system.svc.cluster.local` if telemetry
 is enabled, `istio-system/istio-policy.istio-system.svc.cluster.local` if
 policy is enabled, or add `istio-system/*` to allow all services in the
 `istio-system` namespace. This requirement is temporary and will be removed
 in a future Istio release.
        repeated string hosts = 4 [(.google.api.field_behavior) = REQUIRED];
        参数:
        index - The index of the element to return.
        返回:
        The hosts at the given index.

      • getHostsBytes

        com.google.protobuf.ByteString getHostsBytes​(int index)
         One or more service hosts exposed by the listener
 in `namespace/dnsName` format. Services in the specified namespace
 matching `dnsName` will be exposed.
 The corresponding service can be a service in the service registry
 (e.g., a Kubernetes or cloud foundry service) or a service specified
 using a `ServiceEntry` or `VirtualService` configuration. Any
 associated `DestinationRule` in the same namespace will also be used.
 The `dnsName` should be specified using FQDN format, optionally including
 a wildcard character in the left-most component (e.g., `prod/*.example.com`).
 Set the `dnsName` to `*` to select all services from the specified namespace
 (e.g., `prod/*`).
 The `namespace` can be set to `*`, `.`, or `~`, representing any, the current,
 or no namespace, respectively. For example, `*/foo.example.com` selects the
 service from any available namespace while `./foo.example.com` only selects
 the service from the namespace of the sidecar. If a host is set to `*/*`,
 Istio will configure the sidecar to be able to reach every service in the
 mesh that is exported to the sidecar's namespace. The value `~/*` can be used
 to completely trim the configuration for sidecars that simply receive traffic
 and respond, but make no outbound connections of their own.
 NOTE: Only services and configuration artifacts exported to the sidecar's
 namespace (e.g., `exportTo` value of `*`) can be referenced.
 Private configurations (e.g., `exportTo` set to `.`) will
 not be available. Refer to the `exportTo` setting in `VirtualService`,
 `DestinationRule`, and `ServiceEntry` configurations for details.
 **WARNING:** The list of egress hosts in a `Sidecar` must also include
 the Mixer control plane services if they are enabled. Envoy will not
 be able to reach them otherwise. For example, add host
 `istio-system/istio-telemetry.istio-system.svc.cluster.local` if telemetry
 is enabled, `istio-system/istio-policy.istio-system.svc.cluster.local` if
 policy is enabled, or add `istio-system/*` to allow all services in the
 `istio-system` namespace. This requirement is temporary and will be removed
 in a future Istio release.
        repeated string hosts = 4 [(.google.api.field_behavior) = REQUIRED];
        参数:
        index - The index of the value to return.
        返回:
        The bytes of the hosts at the given index.