NetworkFirewallClient (AWS Java SDK :: Services :: Network Firewall 2.20.98 API)

All Superinterfaces:

AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient
```
@Generated(value="software.amazon.awssdk:codegen")
 @ThreadSafe
public interface NetworkFirewallClient
extends AwsClient
```
Service client for accessing Network Firewall. This can be created using the static builder() method.
This is the API Reference for Network Firewall. This guide is for developers who need detailed information about the Network Firewall API actions, data types, and errors.
- The REST API requires you to handle connection details, such as calculating signatures, handling request retries, and error handling. For general information about using the Amazon Web Services REST APIs, see Amazon Web Services APIs.
  
  To access Network Firewall using the REST API endpoint: https://network-firewall.<region>.amazonaws.com
- Alternatively, you can use one of the Amazon Web Services SDKs to access an API that's tailored to the programming language or platform that you're using. For more information, see Amazon Web Services SDKs.
- For descriptions of Network Firewall features, including and step-by-step instructions on how to use them through the Network Firewall console, see the Network Firewall Developer Guide.
Network Firewall is a stateful, managed, network firewall and intrusion detection and prevention service for Amazon Virtual Private Cloud (Amazon VPC). With Network Firewall, you can filter traffic at the perimeter of your VPC. This includes filtering traffic going to and coming from an internet gateway, NAT gateway, or over VPN or Direct Connect. Network Firewall uses rules that are compatible with Suricata, a free, open source network analysis and threat detection engine. Network Firewall supports Suricata version 6.0.9. For information about Suricata, see the Suricata website.

You can use Network Firewall to monitor and protect your VPC traffic in a number of ways. The following are just a few examples:
- Allow domains or IP addresses for known Amazon Web Services service endpoints, such as Amazon S3, and block all other forms of traffic.
- Use custom lists of known bad domains to limit the types of domain names that your applications can access.
- Perform deep packet inspection on traffic entering or leaving your VPC.
- Use stateful protocol detection to filter protocols like HTTPS, regardless of the port used.
To enable Network Firewall for your VPCs, you perform steps in both Amazon VPC and in Network Firewall. For information about using Amazon VPC, see Amazon VPC User Guide.

To start using Network Firewall, do the following:
1. (Optional) If you don't already have a VPC that you want to protect, create it in Amazon VPC.
2. In Amazon VPC, in each Availability Zone where you want to have a firewall endpoint, create a subnet for the sole use of Network Firewall.
3. In Network Firewall, create stateless and stateful rule groups, to define the components of the network traffic filtering behavior that you want your firewall to have.
4. In Network Firewall, create a firewall policy that uses your rule groups and specifies additional default traffic filtering behavior.
5. In Network Firewall, create a firewall and specify your new firewall policy and VPC subnets. Network Firewall creates a firewall endpoint in each subnet that you specify, with the behavior that's defined in the firewall policy.
6. In Amazon VPC, use ingress routing enhancements to route traffic through the new firewall endpoints.

Field Summary

Fields
Modifier and Type Field and Description

static String SERVICE_METADATA_ID
Value for looking up the service's metadata from the ServiceMetadataProvider.

static String SERVICE_NAME

Fields
Modifier and Type	Field and Description
`static String`	`SERVICE_METADATA_ID` Value for looking up the service's metadata from the `ServiceMetadataProvider`.
`static String`	`SERVICE_NAME`

Method Summary

All Methods Static Methods Instance Methods Default Methods
Modifier and Type	Method and Description
`default AssociateFirewallPolicyResponse`	`associateFirewallPolicy(AssociateFirewallPolicyRequest associateFirewallPolicyRequest)` Associates a FirewallPolicy to a Firewall.
`default AssociateFirewallPolicyResponse`	`associateFirewallPolicy(Consumer<AssociateFirewallPolicyRequest.Builder> associateFirewallPolicyRequest)` Associates a FirewallPolicy to a Firewall.
`default AssociateSubnetsResponse`	`associateSubnets(AssociateSubnetsRequest associateSubnetsRequest)` Associates the specified subnets in the Amazon VPC to the firewall.
`default AssociateSubnetsResponse`	`associateSubnets(Consumer<AssociateSubnetsRequest.Builder> associateSubnetsRequest)` Associates the specified subnets in the Amazon VPC to the firewall.
`static NetworkFirewallClientBuilder`	`builder()` Create a builder that can be used to configure and create a `NetworkFirewallClient`.
`static NetworkFirewallClient`	`create()` Create a `NetworkFirewallClient` with the region loaded from the `DefaultAwsRegionProviderChain` and credentials loaded from the `DefaultCredentialsProvider`.
`default CreateFirewallResponse`	`createFirewall(Consumer<CreateFirewallRequest.Builder> createFirewallRequest)` Creates an Network Firewall Firewall and accompanying FirewallStatus for a VPC.
`default CreateFirewallResponse`	`createFirewall(CreateFirewallRequest createFirewallRequest)` Creates an Network Firewall Firewall and accompanying FirewallStatus for a VPC.
`default CreateFirewallPolicyResponse`	`createFirewallPolicy(Consumer<CreateFirewallPolicyRequest.Builder> createFirewallPolicyRequest)` Creates the firewall policy for the firewall according to the specifications.
`default CreateFirewallPolicyResponse`	`createFirewallPolicy(CreateFirewallPolicyRequest createFirewallPolicyRequest)` Creates the firewall policy for the firewall according to the specifications.
`default CreateRuleGroupResponse`	`createRuleGroup(Consumer<CreateRuleGroupRequest.Builder> createRuleGroupRequest)` Creates the specified stateless or stateful rule group, which includes the rules for network traffic inspection, a capacity setting, and tags.
`default CreateRuleGroupResponse`	`createRuleGroup(CreateRuleGroupRequest createRuleGroupRequest)` Creates the specified stateless or stateful rule group, which includes the rules for network traffic inspection, a capacity setting, and tags.
`default CreateTlsInspectionConfigurationResponse`	`createTLSInspectionConfiguration(Consumer<CreateTlsInspectionConfigurationRequest.Builder> createTlsInspectionConfigurationRequest)` Creates an Network Firewall TLS inspection configuration.
`default CreateTlsInspectionConfigurationResponse`	`createTLSInspectionConfiguration(CreateTlsInspectionConfigurationRequest createTlsInspectionConfigurationRequest)` Creates an Network Firewall TLS inspection configuration.
`default DeleteFirewallResponse`	`deleteFirewall(Consumer<DeleteFirewallRequest.Builder> deleteFirewallRequest)` Deletes the specified Firewall and its FirewallStatus.
`default DeleteFirewallResponse`	`deleteFirewall(DeleteFirewallRequest deleteFirewallRequest)` Deletes the specified Firewall and its FirewallStatus.
`default DeleteFirewallPolicyResponse`	`deleteFirewallPolicy(Consumer<DeleteFirewallPolicyRequest.Builder> deleteFirewallPolicyRequest)` Deletes the specified FirewallPolicy.
`default DeleteFirewallPolicyResponse`	`deleteFirewallPolicy(DeleteFirewallPolicyRequest deleteFirewallPolicyRequest)` Deletes the specified FirewallPolicy.
`default DeleteResourcePolicyResponse`	`deleteResourcePolicy(Consumer<DeleteResourcePolicyRequest.Builder> deleteResourcePolicyRequest)` Deletes a resource policy that you created in a PutResourcePolicy request.
`default DeleteResourcePolicyResponse`	`deleteResourcePolicy(DeleteResourcePolicyRequest deleteResourcePolicyRequest)` Deletes a resource policy that you created in a PutResourcePolicy request.
`default DeleteRuleGroupResponse`	`deleteRuleGroup(Consumer<DeleteRuleGroupRequest.Builder> deleteRuleGroupRequest)` Deletes the specified RuleGroup.
`default DeleteRuleGroupResponse`	`deleteRuleGroup(DeleteRuleGroupRequest deleteRuleGroupRequest)` Deletes the specified RuleGroup.
`default DeleteTlsInspectionConfigurationResponse`	`deleteTLSInspectionConfiguration(Consumer<DeleteTlsInspectionConfigurationRequest.Builder> deleteTlsInspectionConfigurationRequest)` Deletes the specified TLSInspectionConfiguration.
`default DeleteTlsInspectionConfigurationResponse`	`deleteTLSInspectionConfiguration(DeleteTlsInspectionConfigurationRequest deleteTlsInspectionConfigurationRequest)` Deletes the specified TLSInspectionConfiguration.
`default DescribeFirewallResponse`	`describeFirewall(Consumer<DescribeFirewallRequest.Builder> describeFirewallRequest)` Returns the data objects for the specified firewall.
`default DescribeFirewallResponse`	`describeFirewall(DescribeFirewallRequest describeFirewallRequest)` Returns the data objects for the specified firewall.
`default DescribeFirewallPolicyResponse`	`describeFirewallPolicy(Consumer<DescribeFirewallPolicyRequest.Builder> describeFirewallPolicyRequest)` Returns the data objects for the specified firewall policy.
`default DescribeFirewallPolicyResponse`	`describeFirewallPolicy(DescribeFirewallPolicyRequest describeFirewallPolicyRequest)` Returns the data objects for the specified firewall policy.
`default DescribeLoggingConfigurationResponse`	`describeLoggingConfiguration(Consumer<DescribeLoggingConfigurationRequest.Builder> describeLoggingConfigurationRequest)` Returns the logging configuration for the specified firewall.
`default DescribeLoggingConfigurationResponse`	`describeLoggingConfiguration(DescribeLoggingConfigurationRequest describeLoggingConfigurationRequest)` Returns the logging configuration for the specified firewall.
`default DescribeResourcePolicyResponse`	`describeResourcePolicy(Consumer<DescribeResourcePolicyRequest.Builder> describeResourcePolicyRequest)` Retrieves a resource policy that you created in a PutResourcePolicy request.
`default DescribeResourcePolicyResponse`	`describeResourcePolicy(DescribeResourcePolicyRequest describeResourcePolicyRequest)` Retrieves a resource policy that you created in a PutResourcePolicy request.
`default DescribeRuleGroupResponse`	`describeRuleGroup(Consumer<DescribeRuleGroupRequest.Builder> describeRuleGroupRequest)` Returns the data objects for the specified rule group.
`default DescribeRuleGroupResponse`	`describeRuleGroup(DescribeRuleGroupRequest describeRuleGroupRequest)` Returns the data objects for the specified rule group.
`default DescribeRuleGroupMetadataResponse`	`describeRuleGroupMetadata(Consumer<DescribeRuleGroupMetadataRequest.Builder> describeRuleGroupMetadataRequest)` High-level information about a rule group, returned by operations like create and describe.
`default DescribeRuleGroupMetadataResponse`	`describeRuleGroupMetadata(DescribeRuleGroupMetadataRequest describeRuleGroupMetadataRequest)` High-level information about a rule group, returned by operations like create and describe.
`default DescribeTlsInspectionConfigurationResponse`	`describeTLSInspectionConfiguration(Consumer<DescribeTlsInspectionConfigurationRequest.Builder> describeTlsInspectionConfigurationRequest)` Returns the data objects for the specified TLS inspection configuration.
`default DescribeTlsInspectionConfigurationResponse`	`describeTLSInspectionConfiguration(DescribeTlsInspectionConfigurationRequest describeTlsInspectionConfigurationRequest)` Returns the data objects for the specified TLS inspection configuration.
`default DisassociateSubnetsResponse`	`disassociateSubnets(Consumer<DisassociateSubnetsRequest.Builder> disassociateSubnetsRequest)` Removes the specified subnet associations from the firewall.
`default DisassociateSubnetsResponse`	`disassociateSubnets(DisassociateSubnetsRequest disassociateSubnetsRequest)` Removes the specified subnet associations from the firewall.
`default ListFirewallPoliciesResponse`	`listFirewallPolicies(Consumer<ListFirewallPoliciesRequest.Builder> listFirewallPoliciesRequest)` Retrieves the metadata for the firewall policies that you have defined.
`default ListFirewallPoliciesResponse`	`listFirewallPolicies(ListFirewallPoliciesRequest listFirewallPoliciesRequest)` Retrieves the metadata for the firewall policies that you have defined.
`default ListFirewallPoliciesIterable`	`listFirewallPoliciesPaginator(Consumer<ListFirewallPoliciesRequest.Builder> listFirewallPoliciesRequest)` Retrieves the metadata for the firewall policies that you have defined.
`default ListFirewallPoliciesIterable`	`listFirewallPoliciesPaginator(ListFirewallPoliciesRequest listFirewallPoliciesRequest)` Retrieves the metadata for the firewall policies that you have defined.
`default ListFirewallsResponse`	`listFirewalls(Consumer<ListFirewallsRequest.Builder> listFirewallsRequest)` Retrieves the metadata for the firewalls that you have defined.
`default ListFirewallsResponse`	`listFirewalls(ListFirewallsRequest listFirewallsRequest)` Retrieves the metadata for the firewalls that you have defined.
`default ListFirewallsIterable`	`listFirewallsPaginator(Consumer<ListFirewallsRequest.Builder> listFirewallsRequest)` Retrieves the metadata for the firewalls that you have defined.
`default ListFirewallsIterable`	`listFirewallsPaginator(ListFirewallsRequest listFirewallsRequest)` Retrieves the metadata for the firewalls that you have defined.
`default ListRuleGroupsResponse`	`listRuleGroups(Consumer<ListRuleGroupsRequest.Builder> listRuleGroupsRequest)` Retrieves the metadata for the rule groups that you have defined.
`default ListRuleGroupsResponse`	`listRuleGroups(ListRuleGroupsRequest listRuleGroupsRequest)` Retrieves the metadata for the rule groups that you have defined.
`default ListRuleGroupsIterable`	`listRuleGroupsPaginator(Consumer<ListRuleGroupsRequest.Builder> listRuleGroupsRequest)` Retrieves the metadata for the rule groups that you have defined.
`default ListRuleGroupsIterable`	`listRuleGroupsPaginator(ListRuleGroupsRequest listRuleGroupsRequest)` Retrieves the metadata for the rule groups that you have defined.
`default ListTagsForResourceResponse`	`listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)` Retrieves the tags associated with the specified resource.
`default ListTagsForResourceResponse`	`listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)` Retrieves the tags associated with the specified resource.
`default ListTagsForResourceIterable`	`listTagsForResourcePaginator(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)` Retrieves the tags associated with the specified resource.
`default ListTagsForResourceIterable`	`listTagsForResourcePaginator(ListTagsForResourceRequest listTagsForResourceRequest)` Retrieves the tags associated with the specified resource.
`default ListTlsInspectionConfigurationsResponse`	`listTLSInspectionConfigurations(Consumer<ListTlsInspectionConfigurationsRequest.Builder> listTlsInspectionConfigurationsRequest)` Retrieves the metadata for the TLS inspection configurations that you have defined.
`default ListTlsInspectionConfigurationsResponse`	`listTLSInspectionConfigurations(ListTlsInspectionConfigurationsRequest listTlsInspectionConfigurationsRequest)` Retrieves the metadata for the TLS inspection configurations that you have defined.
`default ListTLSInspectionConfigurationsIterable`	`listTLSInspectionConfigurationsPaginator(Consumer<ListTlsInspectionConfigurationsRequest.Builder> listTlsInspectionConfigurationsRequest)` Retrieves the metadata for the TLS inspection configurations that you have defined.
`default ListTLSInspectionConfigurationsIterable`	`listTLSInspectionConfigurationsPaginator(ListTlsInspectionConfigurationsRequest listTlsInspectionConfigurationsRequest)` Retrieves the metadata for the TLS inspection configurations that you have defined.
`default PutResourcePolicyResponse`	`putResourcePolicy(Consumer<PutResourcePolicyRequest.Builder> putResourcePolicyRequest)` Creates or updates an IAM policy for your rule group or firewall policy.
`default PutResourcePolicyResponse`	`putResourcePolicy(PutResourcePolicyRequest putResourcePolicyRequest)` Creates or updates an IAM policy for your rule group or firewall policy.
`default NetworkFirewallServiceClientConfiguration`	`serviceClientConfiguration()`
`static ServiceMetadata`	`serviceMetadata()`
`default TagResourceResponse`	`tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)` Adds the specified tags to the specified resource.
`default TagResourceResponse`	`tagResource(TagResourceRequest tagResourceRequest)` Adds the specified tags to the specified resource.
`default UntagResourceResponse`	`untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)` Removes the tags with the specified keys from the specified resource.
`default UntagResourceResponse`	`untagResource(UntagResourceRequest untagResourceRequest)` Removes the tags with the specified keys from the specified resource.
`default UpdateFirewallDeleteProtectionResponse`	`updateFirewallDeleteProtection(Consumer<UpdateFirewallDeleteProtectionRequest.Builder> updateFirewallDeleteProtectionRequest)` Modifies the flag, `DeleteProtection`, which indicates whether it is possible to delete the firewall.
`default UpdateFirewallDeleteProtectionResponse`	`updateFirewallDeleteProtection(UpdateFirewallDeleteProtectionRequest updateFirewallDeleteProtectionRequest)` Modifies the flag, `DeleteProtection`, which indicates whether it is possible to delete the firewall.
`default UpdateFirewallDescriptionResponse`	`updateFirewallDescription(Consumer<UpdateFirewallDescriptionRequest.Builder> updateFirewallDescriptionRequest)` Modifies the description for the specified firewall.
`default UpdateFirewallDescriptionResponse`	`updateFirewallDescription(UpdateFirewallDescriptionRequest updateFirewallDescriptionRequest)` Modifies the description for the specified firewall.
`default UpdateFirewallEncryptionConfigurationResponse`	`updateFirewallEncryptionConfiguration(Consumer<UpdateFirewallEncryptionConfigurationRequest.Builder> updateFirewallEncryptionConfigurationRequest)` A complex type that contains settings for encryption of your firewall resources.
`default UpdateFirewallEncryptionConfigurationResponse`	`updateFirewallEncryptionConfiguration(UpdateFirewallEncryptionConfigurationRequest updateFirewallEncryptionConfigurationRequest)` A complex type that contains settings for encryption of your firewall resources.
`default UpdateFirewallPolicyResponse`	`updateFirewallPolicy(Consumer<UpdateFirewallPolicyRequest.Builder> updateFirewallPolicyRequest)` Updates the properties of the specified firewall policy.
`default UpdateFirewallPolicyResponse`	`updateFirewallPolicy(UpdateFirewallPolicyRequest updateFirewallPolicyRequest)` Updates the properties of the specified firewall policy.
`default UpdateFirewallPolicyChangeProtectionResponse`	`updateFirewallPolicyChangeProtection(Consumer<UpdateFirewallPolicyChangeProtectionRequest.Builder> updateFirewallPolicyChangeProtectionRequest)` Modifies the flag, `ChangeProtection`, which indicates whether it is possible to change the firewall.
`default UpdateFirewallPolicyChangeProtectionResponse`	`updateFirewallPolicyChangeProtection(UpdateFirewallPolicyChangeProtectionRequest updateFirewallPolicyChangeProtectionRequest)` Modifies the flag, `ChangeProtection`, which indicates whether it is possible to change the firewall.
`default UpdateLoggingConfigurationResponse`	`updateLoggingConfiguration(Consumer<UpdateLoggingConfigurationRequest.Builder> updateLoggingConfigurationRequest)` Sets the logging configuration for the specified firewall.
`default UpdateLoggingConfigurationResponse`	`updateLoggingConfiguration(UpdateLoggingConfigurationRequest updateLoggingConfigurationRequest)` Sets the logging configuration for the specified firewall.
`default UpdateRuleGroupResponse`	`updateRuleGroup(Consumer<UpdateRuleGroupRequest.Builder> updateRuleGroupRequest)` Updates the rule settings for the specified rule group.
`default UpdateRuleGroupResponse`	`updateRuleGroup(UpdateRuleGroupRequest updateRuleGroupRequest)` Updates the rule settings for the specified rule group.
`default UpdateSubnetChangeProtectionResponse`	`updateSubnetChangeProtection(Consumer<UpdateSubnetChangeProtectionRequest.Builder> updateSubnetChangeProtectionRequest)`
`default UpdateSubnetChangeProtectionResponse`	`updateSubnetChangeProtection(UpdateSubnetChangeProtectionRequest updateSubnetChangeProtectionRequest)`
`default UpdateTlsInspectionConfigurationResponse`	`updateTLSInspectionConfiguration(Consumer<UpdateTlsInspectionConfigurationRequest.Builder> updateTlsInspectionConfigurationRequest)` Updates the TLS inspection configuration settings for the specified TLS inspection configuration.
`default UpdateTlsInspectionConfigurationResponse`	`updateTLSInspectionConfiguration(UpdateTlsInspectionConfigurationRequest updateTlsInspectionConfigurationRequest)` Updates the TLS inspection configuration settings for the specified TLS inspection configuration.

Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close

- Field Detail
  - SERVICE_NAME
```
static final String SERVICE_NAME
```
    See Also:
    
    Constant Field Values
  - SERVICE_METADATA_ID
```
static final String SERVICE_METADATA_ID
```
    Value for looking up the service's metadata from the ServiceMetadataProvider.
    
    See Also:
    
    Constant Field Values
- Method Detail
  - associateFirewallPolicy
```
default AssociateFirewallPolicyResponse associateFirewallPolicy(AssociateFirewallPolicyRequest associateFirewallPolicyRequest)
                                                         throws InvalidRequestException,
                                                                InternalServerErrorException,
                                                                ResourceNotFoundException,
                                                                ThrottlingException,
                                                                InvalidTokenException,
                                                                InvalidOperationException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                NetworkFirewallException
```
    Associates a FirewallPolicy to a Firewall.
    
    A firewall policy defines how to monitor and manage your VPC network traffic, using a collection of inspection rule groups and other settings. Each firewall requires one firewall policy association, and you can use the same firewall policy for multiple firewalls.
    Parameters:
    
    associateFirewallPolicyRequest -
    
    Returns:
    
    Result of the AssociateFirewallPolicy operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - associateFirewallPolicy
```
default AssociateFirewallPolicyResponse associateFirewallPolicy(Consumer<AssociateFirewallPolicyRequest.Builder> associateFirewallPolicyRequest)
                                                         throws InvalidRequestException,
                                                                InternalServerErrorException,
                                                                ResourceNotFoundException,
                                                                ThrottlingException,
                                                                InvalidTokenException,
                                                                InvalidOperationException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                NetworkFirewallException
```
    Associates a FirewallPolicy to a Firewall.
    
    A firewall policy defines how to monitor and manage your VPC network traffic, using a collection of inspection rule groups and other settings. Each firewall requires one firewall policy association, and you can use the same firewall policy for multiple firewalls.
    
    This is a convenience which creates an instance of the AssociateFirewallPolicyRequest.Builder avoiding the need to create one manually via AssociateFirewallPolicyRequest.builder()
    Parameters:
    
    associateFirewallPolicyRequest - A Consumer that will call methods on AssociateFirewallPolicyRequest.Builder to create a request.
    
    Returns:
    
    Result of the AssociateFirewallPolicy operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - associateSubnets
```
default AssociateSubnetsResponse associateSubnets(AssociateSubnetsRequest associateSubnetsRequest)
                                           throws InvalidRequestException,
                                                  InternalServerErrorException,
                                                  ResourceNotFoundException,
                                                  ThrottlingException,
                                                  InvalidTokenException,
                                                  InvalidOperationException,
                                                  InsufficientCapacityException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  NetworkFirewallException
```
    Associates the specified subnets in the Amazon VPC to the firewall. You can specify one subnet for each of the Availability Zones that the VPC spans.
    
    This request creates an Network Firewall firewall endpoint in each of the subnets. To enable the firewall's protections, you must also modify the VPC's route tables for each subnet's Availability Zone, to redirect the traffic that's coming into and going out of the zone through the firewall endpoint.
    Parameters:
    
    associateSubnetsRequest -
    
    Returns:
    
    Result of the AssociateSubnets operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    InsufficientCapacityException - Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - associateSubnets
```
default AssociateSubnetsResponse associateSubnets(Consumer<AssociateSubnetsRequest.Builder> associateSubnetsRequest)
                                           throws InvalidRequestException,
                                                  InternalServerErrorException,
                                                  ResourceNotFoundException,
                                                  ThrottlingException,
                                                  InvalidTokenException,
                                                  InvalidOperationException,
                                                  InsufficientCapacityException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  NetworkFirewallException
```
    Associates the specified subnets in the Amazon VPC to the firewall. You can specify one subnet for each of the Availability Zones that the VPC spans.
    
    This request creates an Network Firewall firewall endpoint in each of the subnets. To enable the firewall's protections, you must also modify the VPC's route tables for each subnet's Availability Zone, to redirect the traffic that's coming into and going out of the zone through the firewall endpoint.
    
    This is a convenience which creates an instance of the AssociateSubnetsRequest.Builder avoiding the need to create one manually via AssociateSubnetsRequest.builder()
    Parameters:
    
    associateSubnetsRequest - A Consumer that will call methods on AssociateSubnetsRequest.Builder to create a request.
    
    Returns:
    
    Result of the AssociateSubnets operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    InsufficientCapacityException - Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createFirewall
```
default CreateFirewallResponse createFirewall(CreateFirewallRequest createFirewallRequest)
                                       throws InvalidRequestException,
                                              LimitExceededException,
                                              InternalServerErrorException,
                                              ThrottlingException,
                                              InsufficientCapacityException,
                                              InvalidOperationException,
                                              AwsServiceException,
                                              SdkClientException,
                                              NetworkFirewallException
```
    Creates an Network Firewall Firewall and accompanying FirewallStatus for a VPC.
    
    The firewall defines the configuration settings for an Network Firewall firewall. The settings that you can define at creation include the firewall policy, the subnets in your VPC to use for the firewall endpoints, and any tags that are attached to the firewall Amazon Web Services resource.
    
    After you create a firewall, you can provide additional settings, like the logging configuration.
    
    To update the settings for a firewall, you use the operations that apply to the settings themselves, for example UpdateLoggingConfiguration, AssociateSubnets, and UpdateFirewallDeleteProtection.
    
    To manage a firewall's tags, use the standard Amazon Web Services resource tagging operations, ListTagsForResource, TagResource, and UntagResource.
    
    To retrieve information about firewalls, use ListFirewalls and DescribeFirewall.
    Parameters:
    
    createFirewallRequest -
    
    Returns:
    
    Result of the CreateFirewall operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    LimitExceededException - Unable to perform the operation because doing so would violate a limit setting.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InsufficientCapacityException - Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createFirewall
```
default CreateFirewallResponse createFirewall(Consumer<CreateFirewallRequest.Builder> createFirewallRequest)
                                       throws InvalidRequestException,
                                              LimitExceededException,
                                              InternalServerErrorException,
                                              ThrottlingException,
                                              InsufficientCapacityException,
                                              InvalidOperationException,
                                              AwsServiceException,
                                              SdkClientException,
                                              NetworkFirewallException
```
    Creates an Network Firewall Firewall and accompanying FirewallStatus for a VPC.
    
    The firewall defines the configuration settings for an Network Firewall firewall. The settings that you can define at creation include the firewall policy, the subnets in your VPC to use for the firewall endpoints, and any tags that are attached to the firewall Amazon Web Services resource.
    
    After you create a firewall, you can provide additional settings, like the logging configuration.
    
    To update the settings for a firewall, you use the operations that apply to the settings themselves, for example UpdateLoggingConfiguration, AssociateSubnets, and UpdateFirewallDeleteProtection.
    
    To manage a firewall's tags, use the standard Amazon Web Services resource tagging operations, ListTagsForResource, TagResource, and UntagResource.
    
    To retrieve information about firewalls, use ListFirewalls and DescribeFirewall.
    
    This is a convenience which creates an instance of the CreateFirewallRequest.Builder avoiding the need to create one manually via CreateFirewallRequest.builder()
    Parameters:
    
    createFirewallRequest - A Consumer that will call methods on CreateFirewallRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateFirewall operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    LimitExceededException - Unable to perform the operation because doing so would violate a limit setting.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InsufficientCapacityException - Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createFirewallPolicy
```
default CreateFirewallPolicyResponse createFirewallPolicy(CreateFirewallPolicyRequest createFirewallPolicyRequest)
                                                   throws LimitExceededException,
                                                          InvalidRequestException,
                                                          ThrottlingException,
                                                          InternalServerErrorException,
                                                          InsufficientCapacityException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          NetworkFirewallException
```
    Creates the firewall policy for the firewall according to the specifications.
    
    An Network Firewall firewall policy defines the behavior of a firewall, in a collection of stateless and stateful rule groups and other settings. You can use one firewall policy for multiple firewalls.
    Parameters:
    
    createFirewallPolicyRequest -
    
    Returns:
    
    Result of the CreateFirewallPolicy operation returned by the service.
    
    Throws:
    
    LimitExceededException - Unable to perform the operation because doing so would violate a limit setting.
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    InsufficientCapacityException - Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createFirewallPolicy
```
default CreateFirewallPolicyResponse createFirewallPolicy(Consumer<CreateFirewallPolicyRequest.Builder> createFirewallPolicyRequest)
                                                   throws LimitExceededException,
                                                          InvalidRequestException,
                                                          ThrottlingException,
                                                          InternalServerErrorException,
                                                          InsufficientCapacityException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          NetworkFirewallException
```
    Creates the firewall policy for the firewall according to the specifications.
    
    An Network Firewall firewall policy defines the behavior of a firewall, in a collection of stateless and stateful rule groups and other settings. You can use one firewall policy for multiple firewalls.
    
    This is a convenience which creates an instance of the CreateFirewallPolicyRequest.Builder avoiding the need to create one manually via CreateFirewallPolicyRequest.builder()
    Parameters:
    
    createFirewallPolicyRequest - A Consumer that will call methods on CreateFirewallPolicyRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateFirewallPolicy operation returned by the service.
    
    Throws:
    
    LimitExceededException - Unable to perform the operation because doing so would violate a limit setting.
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    InsufficientCapacityException - Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createRuleGroup
```
default CreateRuleGroupResponse createRuleGroup(CreateRuleGroupRequest createRuleGroupRequest)
                                         throws LimitExceededException,
                                                InvalidRequestException,
                                                ThrottlingException,
                                                InternalServerErrorException,
                                                InsufficientCapacityException,
                                                AwsServiceException,
                                                SdkClientException,
                                                NetworkFirewallException
```
    Creates the specified stateless or stateful rule group, which includes the rules for network traffic inspection, a capacity setting, and tags.
    
    You provide your rule group specification in your request using either RuleGroup or Rules.
    Parameters:
    
    createRuleGroupRequest -
    
    Returns:
    
    Result of the CreateRuleGroup operation returned by the service.
    
    Throws:
    
    LimitExceededException - Unable to perform the operation because doing so would violate a limit setting.
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    InsufficientCapacityException - Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createRuleGroup
```
default CreateRuleGroupResponse createRuleGroup(Consumer<CreateRuleGroupRequest.Builder> createRuleGroupRequest)
                                         throws LimitExceededException,
                                                InvalidRequestException,
                                                ThrottlingException,
                                                InternalServerErrorException,
                                                InsufficientCapacityException,
                                                AwsServiceException,
                                                SdkClientException,
                                                NetworkFirewallException
```
    Creates the specified stateless or stateful rule group, which includes the rules for network traffic inspection, a capacity setting, and tags.
    
    You provide your rule group specification in your request using either RuleGroup or Rules.
    
    This is a convenience which creates an instance of the CreateRuleGroupRequest.Builder avoiding the need to create one manually via CreateRuleGroupRequest.builder()
    Parameters:
    
    createRuleGroupRequest - A Consumer that will call methods on CreateRuleGroupRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateRuleGroup operation returned by the service.
    
    Throws:
    
    LimitExceededException - Unable to perform the operation because doing so would violate a limit setting.
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    InsufficientCapacityException - Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createTLSInspectionConfiguration
```
default CreateTlsInspectionConfigurationResponse createTLSInspectionConfiguration(CreateTlsInspectionConfigurationRequest createTlsInspectionConfigurationRequest)
                                                                           throws InvalidRequestException,
                                                                                  ThrottlingException,
                                                                                  InternalServerErrorException,
                                                                                  AwsServiceException,
                                                                                  SdkClientException,
                                                                                  NetworkFirewallException
```
    Creates an Network Firewall TLS inspection configuration. A TLS inspection configuration contains the Certificate Manager certificate references that Network Firewall uses to decrypt and re-encrypt inbound traffic.
    
    After you create a TLS inspection configuration, you associate it with a firewall policy.
    
    To update the settings for a TLS inspection configuration, use UpdateTLSInspectionConfiguration.
    
    To manage a TLS inspection configuration's tags, use the standard Amazon Web Services resource tagging operations, ListTagsForResource, TagResource, and UntagResource.
    
    To retrieve information about TLS inspection configurations, use ListTLSInspectionConfigurations and DescribeTLSInspectionConfiguration.
    
    For more information about TLS inspection configurations, see Decrypting SSL/TLS traffic with TLS inspection configurations in the Network Firewall Developer Guide.
    Parameters:
    
    createTlsInspectionConfigurationRequest -
    
    Returns:
    
    Result of the CreateTLSInspectionConfiguration operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createTLSInspectionConfiguration
```
default CreateTlsInspectionConfigurationResponse createTLSInspectionConfiguration(Consumer<CreateTlsInspectionConfigurationRequest.Builder> createTlsInspectionConfigurationRequest)
                                                                           throws InvalidRequestException,
                                                                                  ThrottlingException,
                                                                                  InternalServerErrorException,
                                                                                  AwsServiceException,
                                                                                  SdkClientException,
                                                                                  NetworkFirewallException
```
    Creates an Network Firewall TLS inspection configuration. A TLS inspection configuration contains the Certificate Manager certificate references that Network Firewall uses to decrypt and re-encrypt inbound traffic.
    
    After you create a TLS inspection configuration, you associate it with a firewall policy.
    
    To update the settings for a TLS inspection configuration, use UpdateTLSInspectionConfiguration.
    
    To manage a TLS inspection configuration's tags, use the standard Amazon Web Services resource tagging operations, ListTagsForResource, TagResource, and UntagResource.
    
    To retrieve information about TLS inspection configurations, use ListTLSInspectionConfigurations and DescribeTLSInspectionConfiguration.
    
    For more information about TLS inspection configurations, see Decrypting SSL/TLS traffic with TLS inspection configurations in the Network Firewall Developer Guide.
    
    This is a convenience which creates an instance of the CreateTlsInspectionConfigurationRequest.Builder avoiding the need to create one manually via CreateTlsInspectionConfigurationRequest.builder()
    Parameters:
    
    createTlsInspectionConfigurationRequest - A Consumer that will call methods on CreateTLSInspectionConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateTLSInspectionConfiguration operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteFirewall
```
default DeleteFirewallResponse deleteFirewall(DeleteFirewallRequest deleteFirewallRequest)
                                       throws InvalidRequestException,
                                              InternalServerErrorException,
                                              ResourceNotFoundException,
                                              ThrottlingException,
                                              UnsupportedOperationException,
                                              InvalidOperationException,
                                              AwsServiceException,
                                              SdkClientException,
                                              NetworkFirewallException
```
    Deletes the specified Firewall and its FirewallStatus. This operation requires the firewall's DeleteProtection flag to be FALSE. You can't revert this operation.
    
    You can check whether a firewall is in use by reviewing the route tables for the Availability Zones where you have firewall subnet mappings. Retrieve the subnet mappings by calling DescribeFirewall. You define and update the route tables through Amazon VPC. As needed, update the route tables for the zones to remove the firewall endpoints. When the route tables no longer use the firewall endpoints, you can remove the firewall safely.
    
    To delete a firewall, remove the delete protection if you need to using UpdateFirewallDeleteProtection, then delete the firewall by calling DeleteFirewall.
    Parameters:
    
    deleteFirewallRequest -
    
    Returns:
    
    Result of the DeleteFirewall operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    UnsupportedOperationException - The operation you requested isn't supported by Network Firewall.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    UnsupportedOperationException
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteFirewall
```
default DeleteFirewallResponse deleteFirewall(Consumer<DeleteFirewallRequest.Builder> deleteFirewallRequest)
                                       throws InvalidRequestException,
                                              InternalServerErrorException,
                                              ResourceNotFoundException,
                                              ThrottlingException,
                                              UnsupportedOperationException,
                                              InvalidOperationException,
                                              AwsServiceException,
                                              SdkClientException,
                                              NetworkFirewallException
```
    Deletes the specified Firewall and its FirewallStatus. This operation requires the firewall's DeleteProtection flag to be FALSE. You can't revert this operation.
    
    You can check whether a firewall is in use by reviewing the route tables for the Availability Zones where you have firewall subnet mappings. Retrieve the subnet mappings by calling DescribeFirewall. You define and update the route tables through Amazon VPC. As needed, update the route tables for the zones to remove the firewall endpoints. When the route tables no longer use the firewall endpoints, you can remove the firewall safely.
    
    To delete a firewall, remove the delete protection if you need to using UpdateFirewallDeleteProtection, then delete the firewall by calling DeleteFirewall.
    
    This is a convenience which creates an instance of the DeleteFirewallRequest.Builder avoiding the need to create one manually via DeleteFirewallRequest.builder()
    Parameters:
    
    deleteFirewallRequest - A Consumer that will call methods on DeleteFirewallRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteFirewall operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    UnsupportedOperationException - The operation you requested isn't supported by Network Firewall.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    UnsupportedOperationException
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteFirewallPolicy
```
default DeleteFirewallPolicyResponse deleteFirewallPolicy(DeleteFirewallPolicyRequest deleteFirewallPolicyRequest)
                                                   throws InvalidRequestException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          InternalServerErrorException,
                                                          UnsupportedOperationException,
                                                          InvalidOperationException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          NetworkFirewallException
```
    Deletes the specified FirewallPolicy.
    Parameters:
    
    deleteFirewallPolicyRequest -
    
    Returns:
    
    Result of the DeleteFirewallPolicy operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    UnsupportedOperationException - The operation you requested isn't supported by Network Firewall.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    UnsupportedOperationException
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteFirewallPolicy
```
default DeleteFirewallPolicyResponse deleteFirewallPolicy(Consumer<DeleteFirewallPolicyRequest.Builder> deleteFirewallPolicyRequest)
                                                   throws InvalidRequestException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          InternalServerErrorException,
                                                          UnsupportedOperationException,
                                                          InvalidOperationException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          NetworkFirewallException
```
    Deletes the specified FirewallPolicy.
    
    This is a convenience which creates an instance of the DeleteFirewallPolicyRequest.Builder avoiding the need to create one manually via DeleteFirewallPolicyRequest.builder()
    Parameters:
    
    deleteFirewallPolicyRequest - A Consumer that will call methods on DeleteFirewallPolicyRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteFirewallPolicy operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    UnsupportedOperationException - The operation you requested isn't supported by Network Firewall.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    UnsupportedOperationException
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteResourcePolicy
```
default DeleteResourcePolicyResponse deleteResourcePolicy(DeleteResourcePolicyRequest deleteResourcePolicyRequest)
                                                   throws InvalidRequestException,
                                                          InternalServerErrorException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          InvalidResourcePolicyException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          NetworkFirewallException
```
    Deletes a resource policy that you created in a PutResourcePolicy request.
    Parameters:
    
    deleteResourcePolicyRequest -
    
    Returns:
    
    Result of the DeleteResourcePolicy operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidResourcePolicyException - The policy statement failed validation.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteResourcePolicy
```
default DeleteResourcePolicyResponse deleteResourcePolicy(Consumer<DeleteResourcePolicyRequest.Builder> deleteResourcePolicyRequest)
                                                   throws InvalidRequestException,
                                                          InternalServerErrorException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          InvalidResourcePolicyException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          NetworkFirewallException
```
    Deletes a resource policy that you created in a PutResourcePolicy request.
    
    This is a convenience which creates an instance of the DeleteResourcePolicyRequest.Builder avoiding the need to create one manually via DeleteResourcePolicyRequest.builder()
    Parameters:
    
    deleteResourcePolicyRequest - A Consumer that will call methods on DeleteResourcePolicyRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteResourcePolicy operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidResourcePolicyException - The policy statement failed validation.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteRuleGroup
```
default DeleteRuleGroupResponse deleteRuleGroup(DeleteRuleGroupRequest deleteRuleGroupRequest)
                                         throws InvalidRequestException,
                                                ResourceNotFoundException,
                                                ThrottlingException,
                                                InternalServerErrorException,
                                                UnsupportedOperationException,
                                                InvalidOperationException,
                                                AwsServiceException,
                                                SdkClientException,
                                                NetworkFirewallException
```
    Deletes the specified RuleGroup.
    Parameters:
    
    deleteRuleGroupRequest -
    
    Returns:
    
    Result of the DeleteRuleGroup operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    UnsupportedOperationException - The operation you requested isn't supported by Network Firewall.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    UnsupportedOperationException
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteRuleGroup
```
default DeleteRuleGroupResponse deleteRuleGroup(Consumer<DeleteRuleGroupRequest.Builder> deleteRuleGroupRequest)
                                         throws InvalidRequestException,
                                                ResourceNotFoundException,
                                                ThrottlingException,
                                                InternalServerErrorException,
                                                UnsupportedOperationException,
                                                InvalidOperationException,
                                                AwsServiceException,
                                                SdkClientException,
                                                NetworkFirewallException
```
    Deletes the specified RuleGroup.
    
    This is a convenience which creates an instance of the DeleteRuleGroupRequest.Builder avoiding the need to create one manually via DeleteRuleGroupRequest.builder()
    Parameters:
    
    deleteRuleGroupRequest - A Consumer that will call methods on DeleteRuleGroupRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteRuleGroup operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    UnsupportedOperationException - The operation you requested isn't supported by Network Firewall.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    UnsupportedOperationException
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteTLSInspectionConfiguration
```
default DeleteTlsInspectionConfigurationResponse deleteTLSInspectionConfiguration(DeleteTlsInspectionConfigurationRequest deleteTlsInspectionConfigurationRequest)
                                                                           throws InvalidRequestException,
                                                                                  InternalServerErrorException,
                                                                                  ResourceNotFoundException,
                                                                                  ThrottlingException,
                                                                                  InvalidOperationException,
                                                                                  AwsServiceException,
                                                                                  SdkClientException,
                                                                                  NetworkFirewallException
```
    Deletes the specified TLSInspectionConfiguration.
    Parameters:
    
    deleteTlsInspectionConfigurationRequest -
    
    Returns:
    
    Result of the DeleteTLSInspectionConfiguration operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteTLSInspectionConfiguration
```
default DeleteTlsInspectionConfigurationResponse deleteTLSInspectionConfiguration(Consumer<DeleteTlsInspectionConfigurationRequest.Builder> deleteTlsInspectionConfigurationRequest)
                                                                           throws InvalidRequestException,
                                                                                  InternalServerErrorException,
                                                                                  ResourceNotFoundException,
                                                                                  ThrottlingException,
                                                                                  InvalidOperationException,
                                                                                  AwsServiceException,
                                                                                  SdkClientException,
                                                                                  NetworkFirewallException
```
    Deletes the specified TLSInspectionConfiguration.
    
    This is a convenience which creates an instance of the DeleteTlsInspectionConfigurationRequest.Builder avoiding the need to create one manually via DeleteTlsInspectionConfigurationRequest.builder()
    Parameters:
    
    deleteTlsInspectionConfigurationRequest - A Consumer that will call methods on DeleteTLSInspectionConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteTLSInspectionConfiguration operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeFirewall
```
default DescribeFirewallResponse describeFirewall(DescribeFirewallRequest describeFirewallRequest)
                                           throws InvalidRequestException,
                                                  InternalServerErrorException,
                                                  ResourceNotFoundException,
                                                  ThrottlingException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  NetworkFirewallException
```
    Returns the data objects for the specified firewall.
    Parameters:
    
    describeFirewallRequest -
    
    Returns:
    
    Result of the DescribeFirewall operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeFirewall
```
default DescribeFirewallResponse describeFirewall(Consumer<DescribeFirewallRequest.Builder> describeFirewallRequest)
                                           throws InvalidRequestException,
                                                  InternalServerErrorException,
                                                  ResourceNotFoundException,
                                                  ThrottlingException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  NetworkFirewallException
```
    Returns the data objects for the specified firewall.
    
    This is a convenience which creates an instance of the DescribeFirewallRequest.Builder avoiding the need to create one manually via DescribeFirewallRequest.builder()
    Parameters:
    
    describeFirewallRequest - A Consumer that will call methods on DescribeFirewallRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeFirewall operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeFirewallPolicy
```
default DescribeFirewallPolicyResponse describeFirewallPolicy(DescribeFirewallPolicyRequest describeFirewallPolicyRequest)
                                                       throws InvalidRequestException,
                                                              ResourceNotFoundException,
                                                              ThrottlingException,
                                                              InternalServerErrorException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              NetworkFirewallException
```
    Returns the data objects for the specified firewall policy.
    Parameters:
    
    describeFirewallPolicyRequest -
    
    Returns:
    
    Result of the DescribeFirewallPolicy operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeFirewallPolicy
```
default DescribeFirewallPolicyResponse describeFirewallPolicy(Consumer<DescribeFirewallPolicyRequest.Builder> describeFirewallPolicyRequest)
                                                       throws InvalidRequestException,
                                                              ResourceNotFoundException,
                                                              ThrottlingException,
                                                              InternalServerErrorException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              NetworkFirewallException
```
    Returns the data objects for the specified firewall policy.
    
    This is a convenience which creates an instance of the DescribeFirewallPolicyRequest.Builder avoiding the need to create one manually via DescribeFirewallPolicyRequest.builder()
    Parameters:
    
    describeFirewallPolicyRequest - A Consumer that will call methods on DescribeFirewallPolicyRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeFirewallPolicy operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeLoggingConfiguration
```
default DescribeLoggingConfigurationResponse describeLoggingConfiguration(DescribeLoggingConfigurationRequest describeLoggingConfigurationRequest)
                                                                   throws InvalidRequestException,
                                                                          InternalServerErrorException,
                                                                          ResourceNotFoundException,
                                                                          ThrottlingException,
                                                                          AwsServiceException,
                                                                          SdkClientException,
                                                                          NetworkFirewallException
```
    Returns the logging configuration for the specified firewall.
    Parameters:
    
    describeLoggingConfigurationRequest -
    
    Returns:
    
    Result of the DescribeLoggingConfiguration operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeLoggingConfiguration
```
default DescribeLoggingConfigurationResponse describeLoggingConfiguration(Consumer<DescribeLoggingConfigurationRequest.Builder> describeLoggingConfigurationRequest)
                                                                   throws InvalidRequestException,
                                                                          InternalServerErrorException,
                                                                          ResourceNotFoundException,
                                                                          ThrottlingException,
                                                                          AwsServiceException,
                                                                          SdkClientException,
                                                                          NetworkFirewallException
```
    Returns the logging configuration for the specified firewall.
    
    This is a convenience which creates an instance of the DescribeLoggingConfigurationRequest.Builder avoiding the need to create one manually via DescribeLoggingConfigurationRequest.builder()
    Parameters:
    
    describeLoggingConfigurationRequest - A Consumer that will call methods on DescribeLoggingConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeLoggingConfiguration operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeResourcePolicy
```
default DescribeResourcePolicyResponse describeResourcePolicy(DescribeResourcePolicyRequest describeResourcePolicyRequest)
                                                       throws InvalidRequestException,
                                                              InternalServerErrorException,
                                                              ResourceNotFoundException,
                                                              ThrottlingException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              NetworkFirewallException
```
    Retrieves a resource policy that you created in a PutResourcePolicy request.
    Parameters:
    
    describeResourcePolicyRequest -
    
    Returns:
    
    Result of the DescribeResourcePolicy operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeResourcePolicy
```
default DescribeResourcePolicyResponse describeResourcePolicy(Consumer<DescribeResourcePolicyRequest.Builder> describeResourcePolicyRequest)
                                                       throws InvalidRequestException,
                                                              InternalServerErrorException,
                                                              ResourceNotFoundException,
                                                              ThrottlingException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              NetworkFirewallException
```
    Retrieves a resource policy that you created in a PutResourcePolicy request.
    
    This is a convenience which creates an instance of the DescribeResourcePolicyRequest.Builder avoiding the need to create one manually via DescribeResourcePolicyRequest.builder()
    Parameters:
    
    describeResourcePolicyRequest - A Consumer that will call methods on DescribeResourcePolicyRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeResourcePolicy operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeRuleGroup
```
default DescribeRuleGroupResponse describeRuleGroup(DescribeRuleGroupRequest describeRuleGroupRequest)
                                             throws InvalidRequestException,
                                                    ResourceNotFoundException,
                                                    ThrottlingException,
                                                    InternalServerErrorException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    NetworkFirewallException
```
    Returns the data objects for the specified rule group.
    Parameters:
    
    describeRuleGroupRequest -
    
    Returns:
    
    Result of the DescribeRuleGroup operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeRuleGroup
```
default DescribeRuleGroupResponse describeRuleGroup(Consumer<DescribeRuleGroupRequest.Builder> describeRuleGroupRequest)
                                             throws InvalidRequestException,
                                                    ResourceNotFoundException,
                                                    ThrottlingException,
                                                    InternalServerErrorException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    NetworkFirewallException
```
    Returns the data objects for the specified rule group.
    
    This is a convenience which creates an instance of the DescribeRuleGroupRequest.Builder avoiding the need to create one manually via DescribeRuleGroupRequest.builder()
    Parameters:
    
    describeRuleGroupRequest - A Consumer that will call methods on DescribeRuleGroupRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeRuleGroup operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeRuleGroupMetadata
```
default DescribeRuleGroupMetadataResponse describeRuleGroupMetadata(DescribeRuleGroupMetadataRequest describeRuleGroupMetadataRequest)
                                                             throws InvalidRequestException,
                                                                    ResourceNotFoundException,
                                                                    ThrottlingException,
                                                                    InternalServerErrorException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    NetworkFirewallException
```
    High-level information about a rule group, returned by operations like create and describe. You can use the information provided in the metadata to retrieve and manage a rule group. You can retrieve all objects for a rule group by calling DescribeRuleGroup.
    Parameters:
    
    describeRuleGroupMetadataRequest -
    
    Returns:
    
    Result of the DescribeRuleGroupMetadata operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeRuleGroupMetadata
```
default DescribeRuleGroupMetadataResponse describeRuleGroupMetadata(Consumer<DescribeRuleGroupMetadataRequest.Builder> describeRuleGroupMetadataRequest)
                                                             throws InvalidRequestException,
                                                                    ResourceNotFoundException,
                                                                    ThrottlingException,
                                                                    InternalServerErrorException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    NetworkFirewallException
```
    High-level information about a rule group, returned by operations like create and describe. You can use the information provided in the metadata to retrieve and manage a rule group. You can retrieve all objects for a rule group by calling DescribeRuleGroup.
    
    This is a convenience which creates an instance of the DescribeRuleGroupMetadataRequest.Builder avoiding the need to create one manually via DescribeRuleGroupMetadataRequest.builder()
    Parameters:
    
    describeRuleGroupMetadataRequest - A Consumer that will call methods on DescribeRuleGroupMetadataRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeRuleGroupMetadata operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeTLSInspectionConfiguration
```
default DescribeTlsInspectionConfigurationResponse describeTLSInspectionConfiguration(DescribeTlsInspectionConfigurationRequest describeTlsInspectionConfigurationRequest)
                                                                               throws InvalidRequestException,
                                                                                      InternalServerErrorException,
                                                                                      ResourceNotFoundException,
                                                                                      ThrottlingException,
                                                                                      AwsServiceException,
                                                                                      SdkClientException,
                                                                                      NetworkFirewallException
```
    Returns the data objects for the specified TLS inspection configuration.
    Parameters:
    
    describeTlsInspectionConfigurationRequest -
    
    Returns:
    
    Result of the DescribeTLSInspectionConfiguration operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeTLSInspectionConfiguration
```
default DescribeTlsInspectionConfigurationResponse describeTLSInspectionConfiguration(Consumer<DescribeTlsInspectionConfigurationRequest.Builder> describeTlsInspectionConfigurationRequest)
                                                                               throws InvalidRequestException,
                                                                                      InternalServerErrorException,
                                                                                      ResourceNotFoundException,
                                                                                      ThrottlingException,
                                                                                      AwsServiceException,
                                                                                      SdkClientException,
                                                                                      NetworkFirewallException
```
    Returns the data objects for the specified TLS inspection configuration.
    
    This is a convenience which creates an instance of the DescribeTlsInspectionConfigurationRequest.Builder avoiding the need to create one manually via DescribeTlsInspectionConfigurationRequest.builder()
    Parameters:
    
    describeTlsInspectionConfigurationRequest - A Consumer that will call methods on DescribeTLSInspectionConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeTLSInspectionConfiguration operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disassociateSubnets
```
default DisassociateSubnetsResponse disassociateSubnets(DisassociateSubnetsRequest disassociateSubnetsRequest)
                                                 throws InvalidRequestException,
                                                        InternalServerErrorException,
                                                        ResourceNotFoundException,
                                                        ThrottlingException,
                                                        InvalidTokenException,
                                                        InvalidOperationException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        NetworkFirewallException
```
    Removes the specified subnet associations from the firewall. This removes the firewall endpoints from the subnets and removes any network filtering protections that the endpoints were providing.
    Parameters:
    
    disassociateSubnetsRequest -
    
    Returns:
    
    Result of the DisassociateSubnets operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disassociateSubnets
```
default DisassociateSubnetsResponse disassociateSubnets(Consumer<DisassociateSubnetsRequest.Builder> disassociateSubnetsRequest)
                                                 throws InvalidRequestException,
                                                        InternalServerErrorException,
                                                        ResourceNotFoundException,
                                                        ThrottlingException,
                                                        InvalidTokenException,
                                                        InvalidOperationException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        NetworkFirewallException
```
    Removes the specified subnet associations from the firewall. This removes the firewall endpoints from the subnets and removes any network filtering protections that the endpoints were providing.
    
    This is a convenience which creates an instance of the DisassociateSubnetsRequest.Builder avoiding the need to create one manually via DisassociateSubnetsRequest.builder()
    Parameters:
    
    disassociateSubnetsRequest - A Consumer that will call methods on DisassociateSubnetsRequest.Builder to create a request.
    
    Returns:
    
    Result of the DisassociateSubnets operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    InvalidOperationException - The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFirewallPolicies
```
default ListFirewallPoliciesResponse listFirewallPolicies(ListFirewallPoliciesRequest listFirewallPoliciesRequest)
                                                   throws InvalidRequestException,
                                                          ThrottlingException,
                                                          InternalServerErrorException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          NetworkFirewallException
```
    Retrieves the metadata for the firewall policies that you have defined. Depending on your setting for max results and the number of firewall policies, a single call might not return the full list.
    Parameters:
    
    listFirewallPoliciesRequest -
    
    Returns:
    
    Result of the ListFirewallPolicies operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFirewallPolicies
```
default ListFirewallPoliciesResponse listFirewallPolicies(Consumer<ListFirewallPoliciesRequest.Builder> listFirewallPoliciesRequest)
                                                   throws InvalidRequestException,
                                                          ThrottlingException,
                                                          InternalServerErrorException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          NetworkFirewallException
```
    Retrieves the metadata for the firewall policies that you have defined. Depending on your setting for max results and the number of firewall policies, a single call might not return the full list.
    
    This is a convenience which creates an instance of the ListFirewallPoliciesRequest.Builder avoiding the need to create one manually via ListFirewallPoliciesRequest.builder()
    Parameters:
    
    listFirewallPoliciesRequest - A Consumer that will call methods on ListFirewallPoliciesRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListFirewallPolicies operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFirewallPoliciesPaginator
```
default ListFirewallPoliciesIterable listFirewallPoliciesPaginator(ListFirewallPoliciesRequest listFirewallPoliciesRequest)
                                                            throws InvalidRequestException,
                                                                   ThrottlingException,
                                                                   InternalServerErrorException,
                                                                   AwsServiceException,
                                                                   SdkClientException,
                                                                   NetworkFirewallException
```
    Retrieves the metadata for the firewall policies that you have defined. Depending on your setting for max results and the number of firewall policies, a single call might not return the full list.
    
    This is a variant of listFirewallPolicies(software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallPoliciesIterable responses = client.listFirewallPoliciesPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallPoliciesIterable responses = client
             .listFirewallPoliciesPaginator(request);
     for (software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallPoliciesIterable responses = client.listFirewallPoliciesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listFirewallPolicies(software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesRequest) operation.
    Parameters:
    
    listFirewallPoliciesRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFirewallPoliciesPaginator
```
default ListFirewallPoliciesIterable listFirewallPoliciesPaginator(Consumer<ListFirewallPoliciesRequest.Builder> listFirewallPoliciesRequest)
                                                            throws InvalidRequestException,
                                                                   ThrottlingException,
                                                                   InternalServerErrorException,
                                                                   AwsServiceException,
                                                                   SdkClientException,
                                                                   NetworkFirewallException
```
    Retrieves the metadata for the firewall policies that you have defined. Depending on your setting for max results and the number of firewall policies, a single call might not return the full list.
    
    This is a variant of listFirewallPolicies(software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallPoliciesIterable responses = client.listFirewallPoliciesPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallPoliciesIterable responses = client
             .listFirewallPoliciesPaginator(request);
     for (software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallPoliciesIterable responses = client.listFirewallPoliciesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listFirewallPolicies(software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesRequest) operation.
    
    This is a convenience which creates an instance of the ListFirewallPoliciesRequest.Builder avoiding the need to create one manually via ListFirewallPoliciesRequest.builder()
    Parameters:
    
    listFirewallPoliciesRequest - A Consumer that will call methods on ListFirewallPoliciesRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFirewalls
```
default ListFirewallsResponse listFirewalls(ListFirewallsRequest listFirewallsRequest)
                                     throws InvalidRequestException,
                                            InternalServerErrorException,
                                            ThrottlingException,
                                            AwsServiceException,
                                            SdkClientException,
                                            NetworkFirewallException
```
    Retrieves the metadata for the firewalls that you have defined. If you provide VPC identifiers in your request, this returns only the firewalls for those VPCs.
    
    Depending on your setting for max results and the number of firewalls, a single call might not return the full list.
    Parameters:
    
    listFirewallsRequest -
    
    Returns:
    
    Result of the ListFirewalls operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFirewalls
```
default ListFirewallsResponse listFirewalls(Consumer<ListFirewallsRequest.Builder> listFirewallsRequest)
                                     throws InvalidRequestException,
                                            InternalServerErrorException,
                                            ThrottlingException,
                                            AwsServiceException,
                                            SdkClientException,
                                            NetworkFirewallException
```
    Retrieves the metadata for the firewalls that you have defined. If you provide VPC identifiers in your request, this returns only the firewalls for those VPCs.
    
    Depending on your setting for max results and the number of firewalls, a single call might not return the full list.
    
    This is a convenience which creates an instance of the ListFirewallsRequest.Builder avoiding the need to create one manually via ListFirewallsRequest.builder()
    Parameters:
    
    listFirewallsRequest - A Consumer that will call methods on ListFirewallsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListFirewalls operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFirewallsPaginator
```
default ListFirewallsIterable listFirewallsPaginator(ListFirewallsRequest listFirewallsRequest)
                                              throws InvalidRequestException,
                                                     InternalServerErrorException,
                                                     ThrottlingException,
                                                     AwsServiceException,
                                                     SdkClientException,
                                                     NetworkFirewallException
```
    Retrieves the metadata for the firewalls that you have defined. If you provide VPC identifiers in your request, this returns only the firewalls for those VPCs.
    
    Depending on your setting for max results and the number of firewalls, a single call might not return the full list.
    
    This is a variant of listFirewalls(software.amazon.awssdk.services.networkfirewall.model.ListFirewallsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallsIterable responses = client.listFirewallsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallsIterable responses = client
             .listFirewallsPaginator(request);
     for (software.amazon.awssdk.services.networkfirewall.model.ListFirewallsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallsIterable responses = client.listFirewallsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listFirewalls(software.amazon.awssdk.services.networkfirewall.model.ListFirewallsRequest) operation.
    Parameters:
    
    listFirewallsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFirewallsPaginator
```
default ListFirewallsIterable listFirewallsPaginator(Consumer<ListFirewallsRequest.Builder> listFirewallsRequest)
                                              throws InvalidRequestException,
                                                     InternalServerErrorException,
                                                     ThrottlingException,
                                                     AwsServiceException,
                                                     SdkClientException,
                                                     NetworkFirewallException
```
    Retrieves the metadata for the firewalls that you have defined. If you provide VPC identifiers in your request, this returns only the firewalls for those VPCs.
    
    Depending on your setting for max results and the number of firewalls, a single call might not return the full list.
    
    This is a variant of listFirewalls(software.amazon.awssdk.services.networkfirewall.model.ListFirewallsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallsIterable responses = client.listFirewallsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallsIterable responses = client
             .listFirewallsPaginator(request);
     for (software.amazon.awssdk.services.networkfirewall.model.ListFirewallsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallsIterable responses = client.listFirewallsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listFirewalls(software.amazon.awssdk.services.networkfirewall.model.ListFirewallsRequest) operation.
    
    This is a convenience which creates an instance of the ListFirewallsRequest.Builder avoiding the need to create one manually via ListFirewallsRequest.builder()
    Parameters:
    
    listFirewallsRequest - A Consumer that will call methods on ListFirewallsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listRuleGroups
```
default ListRuleGroupsResponse listRuleGroups(ListRuleGroupsRequest listRuleGroupsRequest)
                                       throws InvalidRequestException,
                                              ThrottlingException,
                                              InternalServerErrorException,
                                              AwsServiceException,
                                              SdkClientException,
                                              NetworkFirewallException
```
    Retrieves the metadata for the rule groups that you have defined. Depending on your setting for max results and the number of rule groups, a single call might not return the full list.
    Parameters:
    
    listRuleGroupsRequest -
    
    Returns:
    
    Result of the ListRuleGroups operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listRuleGroups
```
default ListRuleGroupsResponse listRuleGroups(Consumer<ListRuleGroupsRequest.Builder> listRuleGroupsRequest)
                                       throws InvalidRequestException,
                                              ThrottlingException,
                                              InternalServerErrorException,
                                              AwsServiceException,
                                              SdkClientException,
                                              NetworkFirewallException
```
    Retrieves the metadata for the rule groups that you have defined. Depending on your setting for max results and the number of rule groups, a single call might not return the full list.
    
    This is a convenience which creates an instance of the ListRuleGroupsRequest.Builder avoiding the need to create one manually via ListRuleGroupsRequest.builder()
    Parameters:
    
    listRuleGroupsRequest - A Consumer that will call methods on ListRuleGroupsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListRuleGroups operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listRuleGroupsPaginator
```
default ListRuleGroupsIterable listRuleGroupsPaginator(ListRuleGroupsRequest listRuleGroupsRequest)
                                                throws InvalidRequestException,
                                                       ThrottlingException,
                                                       InternalServerErrorException,
                                                       AwsServiceException,
                                                       SdkClientException,
                                                       NetworkFirewallException
```
    Retrieves the metadata for the rule groups that you have defined. Depending on your setting for max results and the number of rule groups, a single call might not return the full list.
    
    This is a variant of listRuleGroups(software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListRuleGroupsIterable responses = client.listRuleGroupsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.networkfirewall.paginators.ListRuleGroupsIterable responses = client
             .listRuleGroupsPaginator(request);
     for (software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListRuleGroupsIterable responses = client.listRuleGroupsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listRuleGroups(software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsRequest) operation.
    Parameters:
    
    listRuleGroupsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listRuleGroupsPaginator
```
default ListRuleGroupsIterable listRuleGroupsPaginator(Consumer<ListRuleGroupsRequest.Builder> listRuleGroupsRequest)
                                                throws InvalidRequestException,
                                                       ThrottlingException,
                                                       InternalServerErrorException,
                                                       AwsServiceException,
                                                       SdkClientException,
                                                       NetworkFirewallException
```
    Retrieves the metadata for the rule groups that you have defined. Depending on your setting for max results and the number of rule groups, a single call might not return the full list.
    
    This is a variant of listRuleGroups(software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListRuleGroupsIterable responses = client.listRuleGroupsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.networkfirewall.paginators.ListRuleGroupsIterable responses = client
             .listRuleGroupsPaginator(request);
     for (software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListRuleGroupsIterable responses = client.listRuleGroupsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listRuleGroups(software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsRequest) operation.
    
    This is a convenience which creates an instance of the ListRuleGroupsRequest.Builder avoiding the need to create one manually via ListRuleGroupsRequest.builder()
    Parameters:
    
    listRuleGroupsRequest - A Consumer that will call methods on ListRuleGroupsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTLSInspectionConfigurations
```
default ListTlsInspectionConfigurationsResponse listTLSInspectionConfigurations(ListTlsInspectionConfigurationsRequest listTlsInspectionConfigurationsRequest)
                                                                         throws InvalidRequestException,
                                                                                InternalServerErrorException,
                                                                                ThrottlingException,
                                                                                AwsServiceException,
                                                                                SdkClientException,
                                                                                NetworkFirewallException
```
    Retrieves the metadata for the TLS inspection configurations that you have defined. Depending on your setting for max results and the number of TLS inspection configurations, a single call might not return the full list.
    Parameters:
    
    listTlsInspectionConfigurationsRequest -
    
    Returns:
    
    Result of the ListTLSInspectionConfigurations operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTLSInspectionConfigurations
```
default ListTlsInspectionConfigurationsResponse listTLSInspectionConfigurations(Consumer<ListTlsInspectionConfigurationsRequest.Builder> listTlsInspectionConfigurationsRequest)
                                                                         throws InvalidRequestException,
                                                                                InternalServerErrorException,
                                                                                ThrottlingException,
                                                                                AwsServiceException,
                                                                                SdkClientException,
                                                                                NetworkFirewallException
```
    Retrieves the metadata for the TLS inspection configurations that you have defined. Depending on your setting for max results and the number of TLS inspection configurations, a single call might not return the full list.
    
    This is a convenience which creates an instance of the ListTlsInspectionConfigurationsRequest.Builder avoiding the need to create one manually via ListTlsInspectionConfigurationsRequest.builder()
    Parameters:
    
    listTlsInspectionConfigurationsRequest - A Consumer that will call methods on ListTLSInspectionConfigurationsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListTLSInspectionConfigurations operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTLSInspectionConfigurationsPaginator
```
default ListTLSInspectionConfigurationsIterable listTLSInspectionConfigurationsPaginator(ListTlsInspectionConfigurationsRequest listTlsInspectionConfigurationsRequest)
                                                                                  throws InvalidRequestException,
                                                                                         InternalServerErrorException,
                                                                                         ThrottlingException,
                                                                                         AwsServiceException,
                                                                                         SdkClientException,
                                                                                         NetworkFirewallException
```
    Retrieves the metadata for the TLS inspection configurations that you have defined. Depending on your setting for max results and the number of TLS inspection configurations, a single call might not return the full list.
    
    This is a variant of listTLSInspectionConfigurations(software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListTLSInspectionConfigurationsIterable responses = client.listTLSInspectionConfigurationsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.networkfirewall.paginators.ListTLSInspectionConfigurationsIterable responses = client
             .listTLSInspectionConfigurationsPaginator(request);
     for (software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListTLSInspectionConfigurationsIterable responses = client.listTLSInspectionConfigurationsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listTLSInspectionConfigurations(software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsRequest) operation.
    Parameters:
    
    listTlsInspectionConfigurationsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTLSInspectionConfigurationsPaginator
```
default ListTLSInspectionConfigurationsIterable listTLSInspectionConfigurationsPaginator(Consumer<ListTlsInspectionConfigurationsRequest.Builder> listTlsInspectionConfigurationsRequest)
                                                                                  throws InvalidRequestException,
                                                                                         InternalServerErrorException,
                                                                                         ThrottlingException,
                                                                                         AwsServiceException,
                                                                                         SdkClientException,
                                                                                         NetworkFirewallException
```
    Retrieves the metadata for the TLS inspection configurations that you have defined. Depending on your setting for max results and the number of TLS inspection configurations, a single call might not return the full list.
    
    This is a variant of listTLSInspectionConfigurations(software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListTLSInspectionConfigurationsIterable responses = client.listTLSInspectionConfigurationsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.networkfirewall.paginators.ListTLSInspectionConfigurationsIterable responses = client
             .listTLSInspectionConfigurationsPaginator(request);
     for (software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListTLSInspectionConfigurationsIterable responses = client.listTLSInspectionConfigurationsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listTLSInspectionConfigurations(software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsRequest) operation.
    
    This is a convenience which creates an instance of the ListTlsInspectionConfigurationsRequest.Builder avoiding the need to create one manually via ListTlsInspectionConfigurationsRequest.builder()
    Parameters:
    
    listTlsInspectionConfigurationsRequest - A Consumer that will call methods on ListTLSInspectionConfigurationsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
                                                 throws ThrottlingException,
                                                        InternalServerErrorException,
                                                        ResourceNotFoundException,
                                                        InvalidRequestException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        NetworkFirewallException
```
    Retrieves the tags associated with the specified resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each Amazon Web Services resource, up to 50 tags for a resource.
    
    You can tag the Amazon Web Services resources that you manage through Network Firewall: firewalls, firewall policies, and rule groups.
    Parameters:
    
    listTagsForResourceRequest -
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
default ListTagsForResourceResponse listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
                                                 throws ThrottlingException,
                                                        InternalServerErrorException,
                                                        ResourceNotFoundException,
                                                        InvalidRequestException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        NetworkFirewallException
```
    Retrieves the tags associated with the specified resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each Amazon Web Services resource, up to 50 tags for a resource.
    
    You can tag the Amazon Web Services resources that you manage through Network Firewall: firewalls, firewall policies, and rule groups.
    
    This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()
    Parameters:
    
    listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResourcePaginator
```
default ListTagsForResourceIterable listTagsForResourcePaginator(ListTagsForResourceRequest listTagsForResourceRequest)
                                                          throws ThrottlingException,
                                                                 InternalServerErrorException,
                                                                 ResourceNotFoundException,
                                                                 InvalidRequestException,
                                                                 AwsServiceException,
                                                                 SdkClientException,
                                                                 NetworkFirewallException
```
    Retrieves the tags associated with the specified resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each Amazon Web Services resource, up to 50 tags for a resource.
    
    You can tag the Amazon Web Services resources that you manage through Network Firewall: firewalls, firewall policies, and rule groups.
    
    This is a variant of listTagsForResource(software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListTagsForResourceIterable responses = client.listTagsForResourcePaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.networkfirewall.paginators.ListTagsForResourceIterable responses = client
             .listTagsForResourcePaginator(request);
     for (software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListTagsForResourceIterable responses = client.listTagsForResourcePaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listTagsForResource(software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceRequest) operation.
    Parameters:
    
    listTagsForResourceRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResourcePaginator
```
default ListTagsForResourceIterable listTagsForResourcePaginator(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
                                                          throws ThrottlingException,
                                                                 InternalServerErrorException,
                                                                 ResourceNotFoundException,
                                                                 InvalidRequestException,
                                                                 AwsServiceException,
                                                                 SdkClientException,
                                                                 NetworkFirewallException
```
    Retrieves the tags associated with the specified resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each Amazon Web Services resource, up to 50 tags for a resource.
    
    You can tag the Amazon Web Services resources that you manage through Network Firewall: firewalls, firewall policies, and rule groups.
    
    This is a variant of listTagsForResource(software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListTagsForResourceIterable responses = client.listTagsForResourcePaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.networkfirewall.paginators.ListTagsForResourceIterable responses = client
             .listTagsForResourcePaginator(request);
     for (software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.networkfirewall.paginators.ListTagsForResourceIterable responses = client.listTagsForResourcePaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listTagsForResource(software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceRequest) operation.
    
    This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()
    Parameters:
    
    listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - putResourcePolicy
```
default PutResourcePolicyResponse putResourcePolicy(PutResourcePolicyRequest putResourcePolicyRequest)
                                             throws InvalidRequestException,
                                                    InternalServerErrorException,
                                                    ResourceNotFoundException,
                                                    ThrottlingException,
                                                    InvalidResourcePolicyException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    NetworkFirewallException
```
    Creates or updates an IAM policy for your rule group or firewall policy. Use this to share rule groups and firewall policies between accounts. This operation works in conjunction with the Amazon Web Services Resource Access Manager (RAM) service to manage resource sharing for Network Firewall.
    
    Use this operation to create or update a resource policy for your rule group or firewall policy. In the policy, you specify the accounts that you want to share the resource with and the operations that you want the accounts to be able to perform.
    
    When you add an account in the resource policy, you then run the following Resource Access Manager (RAM) operations to access and accept the shared rule group or firewall policy.
    - GetResourceShareInvitations - Returns the Amazon Resource Names (ARNs) of the resource share invitations.
    - AcceptResourceShareInvitation - Accepts the share invitation for a specified resource share.
    For additional information about resource sharing using RAM, see Resource Access Manager User Guide.
    Parameters:
    
    putResourcePolicyRequest -
    
    Returns:
    
    Result of the PutResourcePolicy operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidResourcePolicyException - The policy statement failed validation.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - putResourcePolicy
```
default PutResourcePolicyResponse putResourcePolicy(Consumer<PutResourcePolicyRequest.Builder> putResourcePolicyRequest)
                                             throws InvalidRequestException,
                                                    InternalServerErrorException,
                                                    ResourceNotFoundException,
                                                    ThrottlingException,
                                                    InvalidResourcePolicyException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    NetworkFirewallException
```
    Creates or updates an IAM policy for your rule group or firewall policy. Use this to share rule groups and firewall policies between accounts. This operation works in conjunction with the Amazon Web Services Resource Access Manager (RAM) service to manage resource sharing for Network Firewall.
    
    Use this operation to create or update a resource policy for your rule group or firewall policy. In the policy, you specify the accounts that you want to share the resource with and the operations that you want the accounts to be able to perform.
    
    When you add an account in the resource policy, you then run the following Resource Access Manager (RAM) operations to access and accept the shared rule group or firewall policy.
    - GetResourceShareInvitations - Returns the Amazon Resource Names (ARNs) of the resource share invitations.
    - AcceptResourceShareInvitation - Accepts the share invitation for a specified resource share.
    For additional information about resource sharing using RAM, see Resource Access Manager User Guide.
    
    This is a convenience which creates an instance of the PutResourcePolicyRequest.Builder avoiding the need to create one manually via PutResourcePolicyRequest.builder()
    Parameters:
    
    putResourcePolicyRequest - A Consumer that will call methods on PutResourcePolicyRequest.Builder to create a request.
    
    Returns:
    
    Result of the PutResourcePolicy operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidResourcePolicyException - The policy statement failed validation.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest)
                                 throws ThrottlingException,
                                        InternalServerErrorException,
                                        ResourceNotFoundException,
                                        InvalidRequestException,
                                        AwsServiceException,
                                        SdkClientException,
                                        NetworkFirewallException
```
    Adds the specified tags to the specified resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each Amazon Web Services resource, up to 50 tags for a resource.
    
    You can tag the Amazon Web Services resources that you manage through Network Firewall: firewalls, firewall policies, and rule groups.
    Parameters:
    
    tagResourceRequest -
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
                                 throws ThrottlingException,
                                        InternalServerErrorException,
                                        ResourceNotFoundException,
                                        InvalidRequestException,
                                        AwsServiceException,
                                        SdkClientException,
                                        NetworkFirewallException
```
    Adds the specified tags to the specified resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each Amazon Web Services resource, up to 50 tags for a resource.
    
    You can tag the Amazon Web Services resources that you manage through Network Firewall: firewalls, firewall policies, and rule groups.
    
    This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()
    Parameters:
    
    tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest)
                                     throws ThrottlingException,
                                            InternalServerErrorException,
                                            ResourceNotFoundException,
                                            InvalidRequestException,
                                            AwsServiceException,
                                            SdkClientException,
                                            NetworkFirewallException
```
    Removes the tags with the specified keys from the specified resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each Amazon Web Services resource, up to 50 tags for a resource.
    
    You can manage tags for the Amazon Web Services resources that you manage through Network Firewall: firewalls, firewall policies, and rule groups.
    Parameters:
    
    untagResourceRequest -
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
                                     throws ThrottlingException,
                                            InternalServerErrorException,
                                            ResourceNotFoundException,
                                            InvalidRequestException,
                                            AwsServiceException,
                                            SdkClientException,
                                            NetworkFirewallException
```
    Removes the tags with the specified keys from the specified resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each Amazon Web Services resource, up to 50 tags for a resource.
    
    You can manage tags for the Amazon Web Services resources that you manage through Network Firewall: firewalls, firewall policies, and rule groups.
    
    This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()
    Parameters:
    
    untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFirewallDeleteProtection
```
default UpdateFirewallDeleteProtectionResponse updateFirewallDeleteProtection(UpdateFirewallDeleteProtectionRequest updateFirewallDeleteProtectionRequest)
                                                                       throws InvalidRequestException,
                                                                              InternalServerErrorException,
                                                                              ResourceNotFoundException,
                                                                              ThrottlingException,
                                                                              InvalidTokenException,
                                                                              ResourceOwnerCheckException,
                                                                              AwsServiceException,
                                                                              SdkClientException,
                                                                              NetworkFirewallException
```
    Modifies the flag, DeleteProtection, which indicates whether it is possible to delete the firewall. If the flag is set to TRUE, the firewall is protected against deletion. This setting helps protect against accidentally deleting a firewall that's in use.
    Parameters:
    
    updateFirewallDeleteProtectionRequest -
    
    Returns:
    
    Result of the UpdateFirewallDeleteProtection operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    ResourceOwnerCheckException - Unable to change the resource because your account doesn't own it.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFirewallDeleteProtection
```
default UpdateFirewallDeleteProtectionResponse updateFirewallDeleteProtection(Consumer<UpdateFirewallDeleteProtectionRequest.Builder> updateFirewallDeleteProtectionRequest)
                                                                       throws InvalidRequestException,
                                                                              InternalServerErrorException,
                                                                              ResourceNotFoundException,
                                                                              ThrottlingException,
                                                                              InvalidTokenException,
                                                                              ResourceOwnerCheckException,
                                                                              AwsServiceException,
                                                                              SdkClientException,
                                                                              NetworkFirewallException
```
    Modifies the flag, DeleteProtection, which indicates whether it is possible to delete the firewall. If the flag is set to TRUE, the firewall is protected against deletion. This setting helps protect against accidentally deleting a firewall that's in use.
    
    This is a convenience which creates an instance of the UpdateFirewallDeleteProtectionRequest.Builder avoiding the need to create one manually via UpdateFirewallDeleteProtectionRequest.builder()
    Parameters:
    
    updateFirewallDeleteProtectionRequest - A Consumer that will call methods on UpdateFirewallDeleteProtectionRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateFirewallDeleteProtection operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    ResourceOwnerCheckException - Unable to change the resource because your account doesn't own it.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFirewallDescription
```
default UpdateFirewallDescriptionResponse updateFirewallDescription(UpdateFirewallDescriptionRequest updateFirewallDescriptionRequest)
                                                             throws InvalidRequestException,
                                                                    InternalServerErrorException,
                                                                    ResourceNotFoundException,
                                                                    ThrottlingException,
                                                                    InvalidTokenException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    NetworkFirewallException
```
    Modifies the description for the specified firewall. Use the description to help you identify the firewall when you're working with it.
    Parameters:
    
    updateFirewallDescriptionRequest -
    
    Returns:
    
    Result of the UpdateFirewallDescription operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFirewallDescription
```
default UpdateFirewallDescriptionResponse updateFirewallDescription(Consumer<UpdateFirewallDescriptionRequest.Builder> updateFirewallDescriptionRequest)
                                                             throws InvalidRequestException,
                                                                    InternalServerErrorException,
                                                                    ResourceNotFoundException,
                                                                    ThrottlingException,
                                                                    InvalidTokenException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    NetworkFirewallException
```
    Modifies the description for the specified firewall. Use the description to help you identify the firewall when you're working with it.
    
    This is a convenience which creates an instance of the UpdateFirewallDescriptionRequest.Builder avoiding the need to create one manually via UpdateFirewallDescriptionRequest.builder()
    Parameters:
    
    updateFirewallDescriptionRequest - A Consumer that will call methods on UpdateFirewallDescriptionRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateFirewallDescription operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFirewallEncryptionConfiguration
```
default UpdateFirewallEncryptionConfigurationResponse updateFirewallEncryptionConfiguration(UpdateFirewallEncryptionConfigurationRequest updateFirewallEncryptionConfigurationRequest)
                                                                                     throws InvalidRequestException,
                                                                                            InternalServerErrorException,
                                                                                            ResourceNotFoundException,
                                                                                            ThrottlingException,
                                                                                            InvalidTokenException,
                                                                                            ResourceOwnerCheckException,
                                                                                            AwsServiceException,
                                                                                            SdkClientException,
                                                                                            NetworkFirewallException
```
    A complex type that contains settings for encryption of your firewall resources.
    Parameters:
    
    updateFirewallEncryptionConfigurationRequest -
    
    Returns:
    
    Result of the UpdateFirewallEncryptionConfiguration operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    ResourceOwnerCheckException - Unable to change the resource because your account doesn't own it.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFirewallEncryptionConfiguration
```
default UpdateFirewallEncryptionConfigurationResponse updateFirewallEncryptionConfiguration(Consumer<UpdateFirewallEncryptionConfigurationRequest.Builder> updateFirewallEncryptionConfigurationRequest)
                                                                                     throws InvalidRequestException,
                                                                                            InternalServerErrorException,
                                                                                            ResourceNotFoundException,
                                                                                            ThrottlingException,
                                                                                            InvalidTokenException,
                                                                                            ResourceOwnerCheckException,
                                                                                            AwsServiceException,
                                                                                            SdkClientException,
                                                                                            NetworkFirewallException
```
    A complex type that contains settings for encryption of your firewall resources.
    
    This is a convenience which creates an instance of the UpdateFirewallEncryptionConfigurationRequest.Builder avoiding the need to create one manually via UpdateFirewallEncryptionConfigurationRequest.builder()
    Parameters:
    
    updateFirewallEncryptionConfigurationRequest - A Consumer that will call methods on UpdateFirewallEncryptionConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateFirewallEncryptionConfiguration operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    ResourceOwnerCheckException - Unable to change the resource because your account doesn't own it.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFirewallPolicy
```
default UpdateFirewallPolicyResponse updateFirewallPolicy(UpdateFirewallPolicyRequest updateFirewallPolicyRequest)
                                                   throws InvalidRequestException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          InternalServerErrorException,
                                                          InvalidTokenException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          NetworkFirewallException
```
    Updates the properties of the specified firewall policy.
    Parameters:
    
    updateFirewallPolicyRequest -
    
    Returns:
    
    Result of the UpdateFirewallPolicy operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFirewallPolicy
```
default UpdateFirewallPolicyResponse updateFirewallPolicy(Consumer<UpdateFirewallPolicyRequest.Builder> updateFirewallPolicyRequest)
                                                   throws InvalidRequestException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          InternalServerErrorException,
                                                          InvalidTokenException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          NetworkFirewallException
```
    Updates the properties of the specified firewall policy.
    
    This is a convenience which creates an instance of the UpdateFirewallPolicyRequest.Builder avoiding the need to create one manually via UpdateFirewallPolicyRequest.builder()
    Parameters:
    
    updateFirewallPolicyRequest - A Consumer that will call methods on UpdateFirewallPolicyRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateFirewallPolicy operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFirewallPolicyChangeProtection
```
default UpdateFirewallPolicyChangeProtectionResponse updateFirewallPolicyChangeProtection(UpdateFirewallPolicyChangeProtectionRequest updateFirewallPolicyChangeProtectionRequest)
                                                                                   throws InvalidRequestException,
                                                                                          InternalServerErrorException,
                                                                                          ResourceNotFoundException,
                                                                                          ThrottlingException,
                                                                                          InvalidTokenException,
                                                                                          ResourceOwnerCheckException,
                                                                                          AwsServiceException,
                                                                                          SdkClientException,
                                                                                          NetworkFirewallException
```
    Modifies the flag, ChangeProtection, which indicates whether it is possible to change the firewall. If the flag is set to TRUE, the firewall is protected from changes. This setting helps protect against accidentally changing a firewall that's in use.
    Parameters:
    
    updateFirewallPolicyChangeProtectionRequest -
    
    Returns:
    
    Result of the UpdateFirewallPolicyChangeProtection operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    ResourceOwnerCheckException - Unable to change the resource because your account doesn't own it.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFirewallPolicyChangeProtection
```
default UpdateFirewallPolicyChangeProtectionResponse updateFirewallPolicyChangeProtection(Consumer<UpdateFirewallPolicyChangeProtectionRequest.Builder> updateFirewallPolicyChangeProtectionRequest)
                                                                                   throws InvalidRequestException,
                                                                                          InternalServerErrorException,
                                                                                          ResourceNotFoundException,
                                                                                          ThrottlingException,
                                                                                          InvalidTokenException,
                                                                                          ResourceOwnerCheckException,
                                                                                          AwsServiceException,
                                                                                          SdkClientException,
                                                                                          NetworkFirewallException
```
    Modifies the flag, ChangeProtection, which indicates whether it is possible to change the firewall. If the flag is set to TRUE, the firewall is protected from changes. This setting helps protect against accidentally changing a firewall that's in use.
    
    This is a convenience which creates an instance of the UpdateFirewallPolicyChangeProtectionRequest.Builder avoiding the need to create one manually via UpdateFirewallPolicyChangeProtectionRequest.builder()
    Parameters:
    
    updateFirewallPolicyChangeProtectionRequest - A Consumer that will call methods on UpdateFirewallPolicyChangeProtectionRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateFirewallPolicyChangeProtection operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    ResourceOwnerCheckException - Unable to change the resource because your account doesn't own it.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateLoggingConfiguration
```
default UpdateLoggingConfigurationResponse updateLoggingConfiguration(UpdateLoggingConfigurationRequest updateLoggingConfigurationRequest)
                                                               throws InvalidRequestException,
                                                                      InternalServerErrorException,
                                                                      ResourceNotFoundException,
                                                                      ThrottlingException,
                                                                      InvalidTokenException,
                                                                      LogDestinationPermissionException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      NetworkFirewallException
```
    Sets the logging configuration for the specified firewall.
    
    To change the logging configuration, retrieve the LoggingConfiguration by calling DescribeLoggingConfiguration, then change it and provide the modified object to this update call. You must change the logging configuration one LogDestinationConfig at a time inside the retrieved LoggingConfiguration object.
    
    You can perform only one of the following actions in any call to UpdateLoggingConfiguration:
    - Create a new log destination object by adding a single LogDestinationConfig array element to LogDestinationConfigs.
    - Delete a log destination object by removing a single LogDestinationConfig array element from LogDestinationConfigs.
    - Change the LogDestination setting in a single LogDestinationConfig array element.
    You can't change the LogDestinationType or LogType in a LogDestinationConfig. To change these settings, delete the existing LogDestinationConfig object and create a new one, using two separate calls to this update operation.
    Parameters:
    
    updateLoggingConfigurationRequest -
    
    Returns:
    
    Result of the UpdateLoggingConfiguration operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    LogDestinationPermissionException - Unable to send logs to a configured logging destination.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateLoggingConfiguration
```
default UpdateLoggingConfigurationResponse updateLoggingConfiguration(Consumer<UpdateLoggingConfigurationRequest.Builder> updateLoggingConfigurationRequest)
                                                               throws InvalidRequestException,
                                                                      InternalServerErrorException,
                                                                      ResourceNotFoundException,
                                                                      ThrottlingException,
                                                                      InvalidTokenException,
                                                                      LogDestinationPermissionException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      NetworkFirewallException
```
    Sets the logging configuration for the specified firewall.
    
    To change the logging configuration, retrieve the LoggingConfiguration by calling DescribeLoggingConfiguration, then change it and provide the modified object to this update call. You must change the logging configuration one LogDestinationConfig at a time inside the retrieved LoggingConfiguration object.
    
    You can perform only one of the following actions in any call to UpdateLoggingConfiguration:
    - Create a new log destination object by adding a single LogDestinationConfig array element to LogDestinationConfigs.
    - Delete a log destination object by removing a single LogDestinationConfig array element from LogDestinationConfigs.
    - Change the LogDestination setting in a single LogDestinationConfig array element.
    You can't change the LogDestinationType or LogType in a LogDestinationConfig. To change these settings, delete the existing LogDestinationConfig object and create a new one, using two separate calls to this update operation.
    
    This is a convenience which creates an instance of the UpdateLoggingConfigurationRequest.Builder avoiding the need to create one manually via UpdateLoggingConfigurationRequest.builder()
    Parameters:
    
    updateLoggingConfigurationRequest - A Consumer that will call methods on UpdateLoggingConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateLoggingConfiguration operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    LogDestinationPermissionException - Unable to send logs to a configured logging destination.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateRuleGroup
```
default UpdateRuleGroupResponse updateRuleGroup(UpdateRuleGroupRequest updateRuleGroupRequest)
                                         throws ResourceNotFoundException,
                                                InvalidRequestException,
                                                ThrottlingException,
                                                InternalServerErrorException,
                                                InvalidTokenException,
                                                AwsServiceException,
                                                SdkClientException,
                                                NetworkFirewallException
```
    Updates the rule settings for the specified rule group. You use a rule group by reference in one or more firewall policies. When you modify a rule group, you modify all firewall policies that use the rule group.
    
    To update a rule group, first call DescribeRuleGroup to retrieve the current RuleGroup object, update the object as needed, and then provide the updated object to this call.
    Parameters:
    
    updateRuleGroupRequest -
    
    Returns:
    
    Result of the UpdateRuleGroup operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateRuleGroup
```
default UpdateRuleGroupResponse updateRuleGroup(Consumer<UpdateRuleGroupRequest.Builder> updateRuleGroupRequest)
                                         throws ResourceNotFoundException,
                                                InvalidRequestException,
                                                ThrottlingException,
                                                InternalServerErrorException,
                                                InvalidTokenException,
                                                AwsServiceException,
                                                SdkClientException,
                                                NetworkFirewallException
```
    Updates the rule settings for the specified rule group. You use a rule group by reference in one or more firewall policies. When you modify a rule group, you modify all firewall policies that use the rule group.
    
    To update a rule group, first call DescribeRuleGroup to retrieve the current RuleGroup object, update the object as needed, and then provide the updated object to this call.
    
    This is a convenience which creates an instance of the UpdateRuleGroupRequest.Builder avoiding the need to create one manually via UpdateRuleGroupRequest.builder()
    Parameters:
    
    updateRuleGroupRequest - A Consumer that will call methods on UpdateRuleGroupRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateRuleGroup operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateSubnetChangeProtection
```
default UpdateSubnetChangeProtectionResponse updateSubnetChangeProtection(UpdateSubnetChangeProtectionRequest updateSubnetChangeProtectionRequest)
                                                                   throws InvalidRequestException,
                                                                          InternalServerErrorException,
                                                                          ResourceNotFoundException,
                                                                          ThrottlingException,
                                                                          InvalidTokenException,
                                                                          ResourceOwnerCheckException,
                                                                          AwsServiceException,
                                                                          SdkClientException,
                                                                          NetworkFirewallException
```
    Parameters:
    
    updateSubnetChangeProtectionRequest -
    
    Returns:
    
    Result of the UpdateSubnetChangeProtection operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    ResourceOwnerCheckException - Unable to change the resource because your account doesn't own it.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateSubnetChangeProtection
```
default UpdateSubnetChangeProtectionResponse updateSubnetChangeProtection(Consumer<UpdateSubnetChangeProtectionRequest.Builder> updateSubnetChangeProtectionRequest)
                                                                   throws InvalidRequestException,
                                                                          InternalServerErrorException,
                                                                          ResourceNotFoundException,
                                                                          ThrottlingException,
                                                                          InvalidTokenException,
                                                                          ResourceOwnerCheckException,
                                                                          AwsServiceException,
                                                                          SdkClientException,
                                                                          NetworkFirewallException
```
    This is a convenience which creates an instance of the UpdateSubnetChangeProtectionRequest.Builder avoiding the need to create one manually via UpdateSubnetChangeProtectionRequest.builder()
    Parameters:
    
    updateSubnetChangeProtectionRequest - A Consumer that will call methods on UpdateSubnetChangeProtectionRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateSubnetChangeProtection operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    ResourceOwnerCheckException - Unable to change the resource because your account doesn't own it.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateTLSInspectionConfiguration
```
default UpdateTlsInspectionConfigurationResponse updateTLSInspectionConfiguration(UpdateTlsInspectionConfigurationRequest updateTlsInspectionConfigurationRequest)
                                                                           throws InvalidRequestException,
                                                                                  ResourceNotFoundException,
                                                                                  ThrottlingException,
                                                                                  InternalServerErrorException,
                                                                                  InvalidTokenException,
                                                                                  AwsServiceException,
                                                                                  SdkClientException,
                                                                                  NetworkFirewallException
```
    Updates the TLS inspection configuration settings for the specified TLS inspection configuration. You use a TLS inspection configuration by reference in one or more firewall policies. When you modify a TLS inspection configuration, you modify all firewall policies that use the TLS inspection configuration.
    
    To update a TLS inspection configuration, first call DescribeTLSInspectionConfiguration to retrieve the current TLSInspectionConfiguration object, update the object as needed, and then provide the updated object to this call.
    Parameters:
    
    updateTlsInspectionConfigurationRequest -
    
    Returns:
    
    Result of the UpdateTLSInspectionConfiguration operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateTLSInspectionConfiguration
```
default UpdateTlsInspectionConfigurationResponse updateTLSInspectionConfiguration(Consumer<UpdateTlsInspectionConfigurationRequest.Builder> updateTlsInspectionConfigurationRequest)
                                                                           throws InvalidRequestException,
                                                                                  ResourceNotFoundException,
                                                                                  ThrottlingException,
                                                                                  InternalServerErrorException,
                                                                                  InvalidTokenException,
                                                                                  AwsServiceException,
                                                                                  SdkClientException,
                                                                                  NetworkFirewallException
```
    Updates the TLS inspection configuration settings for the specified TLS inspection configuration. You use a TLS inspection configuration by reference in one or more firewall policies. When you modify a TLS inspection configuration, you modify all firewall policies that use the TLS inspection configuration.
    
    To update a TLS inspection configuration, first call DescribeTLSInspectionConfiguration to retrieve the current TLSInspectionConfiguration object, update the object as needed, and then provide the updated object to this call.
    
    This is a convenience which creates an instance of the UpdateTlsInspectionConfigurationRequest.Builder avoiding the need to create one manually via UpdateTlsInspectionConfigurationRequest.builder()
    Parameters:
    
    updateTlsInspectionConfigurationRequest - A Consumer that will call methods on UpdateTLSInspectionConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateTLSInspectionConfiguration operation returned by the service.
    
    Throws:
    InvalidRequestException - The operation failed because of a problem with your request. Examples include:
    
    You specified an unsupported parameter name or value.
    
    You tried to update a property with a value that isn't among the available types.
    
    Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
    ResourceNotFoundException - Unable to locate a resource using the parameters that you provided.
    
    ThrottlingException - Unable to process the request due to throttling limitations.
    
    InternalServerErrorException - Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.
    
    InvalidTokenException - The token you provided is stale or isn't valid for the operation.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    NetworkFirewallException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - create
```
static NetworkFirewallClient create()
```
    Create a NetworkFirewallClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
  - builder
```
static NetworkFirewallClientBuilder builder()
```
    Create a builder that can be used to configure and create a NetworkFirewallClient.
  - serviceMetadata
```
static ServiceMetadata serviceMetadata()
```
  - serviceClientConfiguration
```
default NetworkFirewallServiceClientConfiguration serviceClientConfiguration()
```
    Specified by:
    
    serviceClientConfiguration in interface AwsClient
    
    Specified by:
    
    serviceClientConfiguration in interface SdkClient

Interface NetworkFirewallClient

Field Summary

Method Summary

Methods inherited from interface software.amazon.awssdk.core.SdkClient

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

Field Detail

SERVICE_NAME

SERVICE_METADATA_ID

Method Detail

associateFirewallPolicy

associateFirewallPolicy

associateSubnets

associateSubnets

createFirewall

createFirewall

createFirewallPolicy

createFirewallPolicy

createRuleGroup

createRuleGroup

createTLSInspectionConfiguration

createTLSInspectionConfiguration

deleteFirewall

deleteFirewall

deleteFirewallPolicy

deleteFirewallPolicy

deleteResourcePolicy

deleteResourcePolicy

deleteRuleGroup

deleteRuleGroup

deleteTLSInspectionConfiguration

deleteTLSInspectionConfiguration

describeFirewall

describeFirewall

describeFirewallPolicy

describeFirewallPolicy

describeLoggingConfiguration

describeLoggingConfiguration

describeResourcePolicy

describeResourcePolicy

describeRuleGroup

describeRuleGroup

describeRuleGroupMetadata

describeRuleGroupMetadata

describeTLSInspectionConfiguration

describeTLSInspectionConfiguration

disassociateSubnets

disassociateSubnets

listFirewallPolicies

listFirewallPolicies

listFirewallPoliciesPaginator

listFirewallPoliciesPaginator

listFirewalls

listFirewalls

listFirewallsPaginator

listFirewallsPaginator

listRuleGroups

listRuleGroups

listRuleGroupsPaginator

listRuleGroupsPaginator

listTLSInspectionConfigurations

listTLSInspectionConfigurations

listTLSInspectionConfigurationsPaginator

listTLSInspectionConfigurationsPaginator

listTagsForResource

listTagsForResource

listTagsForResourcePaginator

listTagsForResourcePaginator

putResourcePolicy

putResourcePolicy

tagResource

tagResource

untagResource

untagResource

updateFirewallDeleteProtection

updateFirewallDeleteProtection

updateFirewallDescription

updateFirewallDescription

updateFirewallEncryptionConfiguration

updateFirewallEncryptionConfiguration

updateFirewallPolicy