@Generated(value="software.amazon.awssdk:codegen") @ThreadSafe public interface OpsWorksCmAsyncClient extends AwsClient
builder()
method.
AWS OpsWorks for configuration management (CM) is a service that runs and manages configuration management servers. You can use AWS OpsWorks CM to create and manage AWS OpsWorks for Chef Automate and AWS OpsWorks for Puppet Enterprise servers, and add or remove nodes for the servers to manage.
Glossary of terms
Server: A configuration management server that can be highly-available. The configuration management server runs on an Amazon Elastic Compute Cloud (EC2) instance, and may use various other AWS services, such as Amazon Relational Database Service (RDS) and Elastic Load Balancing. A server is a generic abstraction over the configuration manager that you want to use, much like Amazon RDS. In AWS OpsWorks CM, you do not start or stop servers. After you create servers, they continue to run until they are deleted.
Engine: The engine is the specific configuration manager that you want to use. Valid values in this release
include ChefAutomate and Puppet.
Backup: This is an application-level backup of the data that the configuration manager stores. AWS OpsWorks CM creates an S3 bucket for backups when you launch the first server. A backup maintains a snapshot of a server's configuration-related attributes at the time the backup starts.
Events: Events are always related to a server. Events are written during server creation, when health checks run, when backups are created, when system maintenance is performed, etc. When you delete a server, the server's events are also deleted.
Account attributes: Every account has attributes that are assigned in the AWS OpsWorks CM database. These attributes store information about configuration limits (servers, backups, etc.) and your customer account.
Endpoints
AWS OpsWorks CM supports the following endpoints, all HTTPS. You must connect to one of the following endpoints. Your servers can only be accessed or managed within the endpoint in which they are created.
opsworks-cm.us-east-1.amazonaws.com
opsworks-cm.us-east-2.amazonaws.com
opsworks-cm.us-west-1.amazonaws.com
opsworks-cm.us-west-2.amazonaws.com
opsworks-cm.ap-northeast-1.amazonaws.com
opsworks-cm.ap-southeast-1.amazonaws.com
opsworks-cm.ap-southeast-2.amazonaws.com
opsworks-cm.eu-central-1.amazonaws.com
opsworks-cm.eu-west-1.amazonaws.com
For more information, see AWS OpsWorks endpoints and quotas in the AWS General Reference.
Throttling limits
All API operations allow for five requests per second with a burst of 10 requests per second.
| Modifier and Type | Field and Description |
|---|---|
static String |
SERVICE_METADATA_ID
Value for looking up the service's metadata from the
ServiceMetadataProvider. |
static String |
SERVICE_NAME |
| Modifier and Type | Method and Description |
|---|---|
default CompletableFuture<AssociateNodeResponse> |
associateNode(AssociateNodeRequest associateNodeRequest)
Associates a new node with the server.
|
default CompletableFuture<AssociateNodeResponse> |
associateNode(Consumer<AssociateNodeRequest.Builder> associateNodeRequest)
Associates a new node with the server.
|
static OpsWorksCmAsyncClientBuilder |
builder()
Create a builder that can be used to configure and create a
OpsWorksCmAsyncClient. |
static OpsWorksCmAsyncClient |
create()
Create a
OpsWorksCmAsyncClient with the region loaded from the
DefaultAwsRegionProviderChain and credentials loaded from the
DefaultCredentialsProvider. |
default CompletableFuture<CreateBackupResponse> |
createBackup(Consumer<CreateBackupRequest.Builder> createBackupRequest)
Creates an application-level backup of a server.
|
default CompletableFuture<CreateBackupResponse> |
createBackup(CreateBackupRequest createBackupRequest)
Creates an application-level backup of a server.
|
default CompletableFuture<CreateServerResponse> |
createServer(Consumer<CreateServerRequest.Builder> createServerRequest)
Creates and immedately starts a new server.
|
default CompletableFuture<CreateServerResponse> |
createServer(CreateServerRequest createServerRequest)
Creates and immedately starts a new server.
|
default CompletableFuture<DeleteBackupResponse> |
deleteBackup(Consumer<DeleteBackupRequest.Builder> deleteBackupRequest)
Deletes a backup.
|
default CompletableFuture<DeleteBackupResponse> |
deleteBackup(DeleteBackupRequest deleteBackupRequest)
Deletes a backup.
|
default CompletableFuture<DeleteServerResponse> |
deleteServer(Consumer<DeleteServerRequest.Builder> deleteServerRequest)
Deletes the server and the underlying AWS CloudFormation stacks (including the server's EC2 instance).
|
default CompletableFuture<DeleteServerResponse> |
deleteServer(DeleteServerRequest deleteServerRequest)
Deletes the server and the underlying AWS CloudFormation stacks (including the server's EC2 instance).
|
default CompletableFuture<DescribeAccountAttributesResponse> |
describeAccountAttributes()
Describes your OpsWorks-CM account attributes.
|
default CompletableFuture<DescribeAccountAttributesResponse> |
describeAccountAttributes(Consumer<DescribeAccountAttributesRequest.Builder> describeAccountAttributesRequest)
Describes your OpsWorks-CM account attributes.
|
default CompletableFuture<DescribeAccountAttributesResponse> |
describeAccountAttributes(DescribeAccountAttributesRequest describeAccountAttributesRequest)
Describes your OpsWorks-CM account attributes.
|
default CompletableFuture<DescribeBackupsResponse> |
describeBackups()
Describes backups.
|
default CompletableFuture<DescribeBackupsResponse> |
describeBackups(Consumer<DescribeBackupsRequest.Builder> describeBackupsRequest)
Describes backups.
|
default CompletableFuture<DescribeBackupsResponse> |
describeBackups(DescribeBackupsRequest describeBackupsRequest)
Describes backups.
|
default DescribeBackupsPublisher |
describeBackupsPaginator()
Describes backups.
|
default DescribeBackupsPublisher |
describeBackupsPaginator(Consumer<DescribeBackupsRequest.Builder> describeBackupsRequest)
Describes backups.
|
default DescribeBackupsPublisher |
describeBackupsPaginator(DescribeBackupsRequest describeBackupsRequest)
Describes backups.
|
default CompletableFuture<DescribeEventsResponse> |
describeEvents(Consumer<DescribeEventsRequest.Builder> describeEventsRequest)
Describes events for a specified server.
|
default CompletableFuture<DescribeEventsResponse> |
describeEvents(DescribeEventsRequest describeEventsRequest)
Describes events for a specified server.
|
default DescribeEventsPublisher |
describeEventsPaginator(Consumer<DescribeEventsRequest.Builder> describeEventsRequest)
Describes events for a specified server.
|
default DescribeEventsPublisher |
describeEventsPaginator(DescribeEventsRequest describeEventsRequest)
Describes events for a specified server.
|
default CompletableFuture<DescribeNodeAssociationStatusResponse> |
describeNodeAssociationStatus(Consumer<DescribeNodeAssociationStatusRequest.Builder> describeNodeAssociationStatusRequest)
Returns the current status of an existing association or disassociation request.
|
default CompletableFuture<DescribeNodeAssociationStatusResponse> |
describeNodeAssociationStatus(DescribeNodeAssociationStatusRequest describeNodeAssociationStatusRequest)
Returns the current status of an existing association or disassociation request.
|
default CompletableFuture<DescribeServersResponse> |
describeServers()
Lists all configuration management servers that are identified with your account.
|
default CompletableFuture<DescribeServersResponse> |
describeServers(Consumer<DescribeServersRequest.Builder> describeServersRequest)
Lists all configuration management servers that are identified with your account.
|
default CompletableFuture<DescribeServersResponse> |
describeServers(DescribeServersRequest describeServersRequest)
Lists all configuration management servers that are identified with your account.
|
default DescribeServersPublisher |
describeServersPaginator()
Lists all configuration management servers that are identified with your account.
|
default DescribeServersPublisher |
describeServersPaginator(Consumer<DescribeServersRequest.Builder> describeServersRequest)
Lists all configuration management servers that are identified with your account.
|
default DescribeServersPublisher |
describeServersPaginator(DescribeServersRequest describeServersRequest)
Lists all configuration management servers that are identified with your account.
|
default CompletableFuture<DisassociateNodeResponse> |
disassociateNode(Consumer<DisassociateNodeRequest.Builder> disassociateNodeRequest)
Disassociates a node from an AWS OpsWorks CM server, and removes the node from the server's managed nodes.
|
default CompletableFuture<DisassociateNodeResponse> |
disassociateNode(DisassociateNodeRequest disassociateNodeRequest)
Disassociates a node from an AWS OpsWorks CM server, and removes the node from the server's managed nodes.
|
default CompletableFuture<ExportServerEngineAttributeResponse> |
exportServerEngineAttribute(Consumer<ExportServerEngineAttributeRequest.Builder> exportServerEngineAttributeRequest)
Exports a specified server engine attribute as a base64-encoded string.
|
default CompletableFuture<ExportServerEngineAttributeResponse> |
exportServerEngineAttribute(ExportServerEngineAttributeRequest exportServerEngineAttributeRequest)
Exports a specified server engine attribute as a base64-encoded string.
|
default CompletableFuture<ListTagsForResourceResponse> |
listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
Returns a list of tags that are applied to the specified AWS OpsWorks for Chef Automate or AWS OpsWorks for
Puppet Enterprise servers or backups.
|
default CompletableFuture<ListTagsForResourceResponse> |
listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
Returns a list of tags that are applied to the specified AWS OpsWorks for Chef Automate or AWS OpsWorks for
Puppet Enterprise servers or backups.
|
default ListTagsForResourcePublisher |
listTagsForResourcePaginator(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
Returns a list of tags that are applied to the specified AWS OpsWorks for Chef Automate or AWS OpsWorks for
Puppet Enterprise servers or backups.
|
default ListTagsForResourcePublisher |
listTagsForResourcePaginator(ListTagsForResourceRequest listTagsForResourceRequest)
Returns a list of tags that are applied to the specified AWS OpsWorks for Chef Automate or AWS OpsWorks for
Puppet Enterprise servers or backups.
|
default CompletableFuture<RestoreServerResponse> |
restoreServer(Consumer<RestoreServerRequest.Builder> restoreServerRequest)
Restores a backup to a server that is in a
CONNECTION_LOST, HEALTHY,
RUNNING, UNHEALTHY, or TERMINATED state. |
default CompletableFuture<RestoreServerResponse> |
restoreServer(RestoreServerRequest restoreServerRequest)
Restores a backup to a server that is in a
CONNECTION_LOST, HEALTHY,
RUNNING, UNHEALTHY, or TERMINATED state. |
default OpsWorksCmServiceClientConfiguration |
serviceClientConfiguration() |
default CompletableFuture<StartMaintenanceResponse> |
startMaintenance(Consumer<StartMaintenanceRequest.Builder> startMaintenanceRequest)
Manually starts server maintenance.
|
default CompletableFuture<StartMaintenanceResponse> |
startMaintenance(StartMaintenanceRequest startMaintenanceRequest)
Manually starts server maintenance.
|
default CompletableFuture<TagResourceResponse> |
tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
Applies tags to an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server, or to server
backups.
|
default CompletableFuture<TagResourceResponse> |
tagResource(TagResourceRequest tagResourceRequest)
Applies tags to an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server, or to server
backups.
|
default CompletableFuture<UntagResourceResponse> |
untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
Removes specified tags from an AWS OpsWorks-CM server or backup.
|
default CompletableFuture<UntagResourceResponse> |
untagResource(UntagResourceRequest untagResourceRequest)
Removes specified tags from an AWS OpsWorks-CM server or backup.
|
default CompletableFuture<UpdateServerResponse> |
updateServer(Consumer<UpdateServerRequest.Builder> updateServerRequest)
Updates settings for a server.
|
default CompletableFuture<UpdateServerResponse> |
updateServer(UpdateServerRequest updateServerRequest)
Updates settings for a server.
|
default CompletableFuture<UpdateServerEngineAttributesResponse> |
updateServerEngineAttributes(Consumer<UpdateServerEngineAttributesRequest.Builder> updateServerEngineAttributesRequest)
Updates engine-specific attributes on a specified server.
|
default CompletableFuture<UpdateServerEngineAttributesResponse> |
updateServerEngineAttributes(UpdateServerEngineAttributesRequest updateServerEngineAttributesRequest)
Updates engine-specific attributes on a specified server.
|
default OpsWorksCmAsyncWaiter |
waiter()
Create an instance of
OpsWorksCmAsyncWaiter using this client. |
serviceNameclosestatic final String SERVICE_NAME
static final String SERVICE_METADATA_ID
ServiceMetadataProvider.default CompletableFuture<AssociateNodeResponse> associateNode(AssociateNodeRequest associateNodeRequest)
Associates a new node with the server. For more information about how to disassociate a node, see DisassociateNode.
On a Chef server: This command is an alternative to knife bootstrap.
Example (Chef):
aws opsworks-cm associate-node --server-name MyServer --node-name MyManagedNode --engine-attributes "Name=CHEF_ORGANIZATION,Value=default" "Name=CHEF_NODE_PUBLIC_KEY,Value=public-key-pem"
On a Puppet server, this command is an alternative to the puppet cert sign command that signs a
Puppet node CSR.
Example (Puppet):
aws opsworks-cm associate-node --server-name MyServer --node-name MyManagedNode --engine-attributes "Name=PUPPET_NODE_CSR,Value=csr-pem"
A node can can only be associated with servers that are in a HEALTHY state. Otherwise, an
InvalidStateException is thrown. A ResourceNotFoundException is thrown when the server
does not exist. A ValidationException is raised when parameters of the request are not valid. The
AssociateNode API call can be integrated into Auto Scaling configurations, AWS Cloudformation templates, or the
user data of a server's instance.
associateNodeRequest - default CompletableFuture<AssociateNodeResponse> associateNode(Consumer<AssociateNodeRequest.Builder> associateNodeRequest)
Associates a new node with the server. For more information about how to disassociate a node, see DisassociateNode.
On a Chef server: This command is an alternative to knife bootstrap.
Example (Chef):
aws opsworks-cm associate-node --server-name MyServer --node-name MyManagedNode --engine-attributes "Name=CHEF_ORGANIZATION,Value=default" "Name=CHEF_NODE_PUBLIC_KEY,Value=public-key-pem"
On a Puppet server, this command is an alternative to the puppet cert sign command that signs a
Puppet node CSR.
Example (Puppet):
aws opsworks-cm associate-node --server-name MyServer --node-name MyManagedNode --engine-attributes "Name=PUPPET_NODE_CSR,Value=csr-pem"
A node can can only be associated with servers that are in a HEALTHY state. Otherwise, an
InvalidStateException is thrown. A ResourceNotFoundException is thrown when the server
does not exist. A ValidationException is raised when parameters of the request are not valid. The
AssociateNode API call can be integrated into Auto Scaling configurations, AWS Cloudformation templates, or the
user data of a server's instance.
This is a convenience which creates an instance of the AssociateNodeRequest.Builder avoiding the need to
create one manually via AssociateNodeRequest.builder()
associateNodeRequest - A Consumer that will call methods on
AssociateNodeRequest.Builder to create a request.default CompletableFuture<CreateBackupResponse> createBackup(CreateBackupRequest createBackupRequest)
Creates an application-level backup of a server. While the server is in the BACKING_UP state, the
server cannot be changed, and no additional backup can be created.
Backups can be created for servers in RUNNING, HEALTHY, and UNHEALTHY
states. By default, you can create a maximum of 50 manual backups.
This operation is asynchronous.
A LimitExceededException is thrown when the maximum number of manual backups is reached. An
InvalidStateException is thrown when the server is not in any of the following states: RUNNING,
HEALTHY, or UNHEALTHY. A ResourceNotFoundException is thrown when the server is not found. A
ValidationException is thrown when parameters of the request are not valid.
createBackupRequest - default CompletableFuture<CreateBackupResponse> createBackup(Consumer<CreateBackupRequest.Builder> createBackupRequest)
Creates an application-level backup of a server. While the server is in the BACKING_UP state, the
server cannot be changed, and no additional backup can be created.
Backups can be created for servers in RUNNING, HEALTHY, and UNHEALTHY
states. By default, you can create a maximum of 50 manual backups.
This operation is asynchronous.
A LimitExceededException is thrown when the maximum number of manual backups is reached. An
InvalidStateException is thrown when the server is not in any of the following states: RUNNING,
HEALTHY, or UNHEALTHY. A ResourceNotFoundException is thrown when the server is not found. A
ValidationException is thrown when parameters of the request are not valid.
This is a convenience which creates an instance of the CreateBackupRequest.Builder avoiding the need to
create one manually via CreateBackupRequest.builder()
createBackupRequest - A Consumer that will call methods on
CreateBackupRequest.Builder to create a request.default CompletableFuture<CreateServerResponse> createServer(CreateServerRequest createServerRequest)
Creates and immedately starts a new server. The server is ready to use when it is in the HEALTHY
state. By default, you can create a maximum of 10 servers.
This operation is asynchronous.
A LimitExceededException is thrown when you have created the maximum number of servers (10). A
ResourceAlreadyExistsException is thrown when a server with the same name already exists in the
account. A ResourceNotFoundException is thrown when you specify a backup ID that is not valid or is
for a backup that does not exist. A ValidationException is thrown when parameters of the request are
not valid.
If you do not specify a security group by adding the SecurityGroupIds parameter, AWS OpsWorks
creates a new security group.
Chef Automate: The default security group opens the Chef server to the world on TCP port 443. If a KeyName is present, AWS OpsWorks enables SSH access. SSH is also open to the world on TCP port 22.
Puppet Enterprise: The default security group opens TCP ports 22, 443, 4433, 8140, 8142, 8143, and 8170. If a KeyName is present, AWS OpsWorks enables SSH access. SSH is also open to the world on TCP port 22.
By default, your server is accessible from any IP address. We recommend that you update your security group rules to allow access from known IP addresses and address ranges only. To edit security group rules, open Security Groups in the navigation pane of the EC2 management console.
To specify your own domain for a server, and provide your own self-signed or CA-signed certificate and private
key, specify values for CustomDomain, CustomCertificate, and
CustomPrivateKey.
createServerRequest - default CompletableFuture<CreateServerResponse> createServer(Consumer<CreateServerRequest.Builder> createServerRequest)
Creates and immedately starts a new server. The server is ready to use when it is in the HEALTHY
state. By default, you can create a maximum of 10 servers.
This operation is asynchronous.
A LimitExceededException is thrown when you have created the maximum number of servers (10). A
ResourceAlreadyExistsException is thrown when a server with the same name already exists in the
account. A ResourceNotFoundException is thrown when you specify a backup ID that is not valid or is
for a backup that does not exist. A ValidationException is thrown when parameters of the request are
not valid.
If you do not specify a security group by adding the SecurityGroupIds parameter, AWS OpsWorks
creates a new security group.
Chef Automate: The default security group opens the Chef server to the world on TCP port 443. If a KeyName is present, AWS OpsWorks enables SSH access. SSH is also open to the world on TCP port 22.
Puppet Enterprise: The default security group opens TCP ports 22, 443, 4433, 8140, 8142, 8143, and 8170. If a KeyName is present, AWS OpsWorks enables SSH access. SSH is also open to the world on TCP port 22.
By default, your server is accessible from any IP address. We recommend that you update your security group rules to allow access from known IP addresses and address ranges only. To edit security group rules, open Security Groups in the navigation pane of the EC2 management console.
To specify your own domain for a server, and provide your own self-signed or CA-signed certificate and private
key, specify values for CustomDomain, CustomCertificate, and
CustomPrivateKey.
This is a convenience which creates an instance of the CreateServerRequest.Builder avoiding the need to
create one manually via CreateServerRequest.builder()
createServerRequest - A Consumer that will call methods on
CreateServerRequest.Builder to create a request.default CompletableFuture<DeleteBackupResponse> deleteBackup(DeleteBackupRequest deleteBackupRequest)
Deletes a backup. You can delete both manual and automated backups. This operation is asynchronous.
An InvalidStateException is thrown when a backup deletion is already in progress. A
ResourceNotFoundException is thrown when the backup does not exist. A
ValidationException is thrown when parameters of the request are not valid.
deleteBackupRequest - default CompletableFuture<DeleteBackupResponse> deleteBackup(Consumer<DeleteBackupRequest.Builder> deleteBackupRequest)
Deletes a backup. You can delete both manual and automated backups. This operation is asynchronous.
An InvalidStateException is thrown when a backup deletion is already in progress. A
ResourceNotFoundException is thrown when the backup does not exist. A
ValidationException is thrown when parameters of the request are not valid.
This is a convenience which creates an instance of the DeleteBackupRequest.Builder avoiding the need to
create one manually via DeleteBackupRequest.builder()
deleteBackupRequest - A Consumer that will call methods on
DeleteBackupRequest.Builder to create a request.default CompletableFuture<DeleteServerResponse> deleteServer(DeleteServerRequest deleteServerRequest)
Deletes the server and the underlying AWS CloudFormation stacks (including the server's EC2 instance). When you
run this command, the server state is updated to DELETING. After the server is deleted, it is no
longer returned by DescribeServer requests. If the AWS CloudFormation stack cannot be deleted, the
server cannot be deleted.
This operation is asynchronous.
An InvalidStateException is thrown when a server deletion is already in progress. A
ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
deleteServerRequest - default CompletableFuture<DeleteServerResponse> deleteServer(Consumer<DeleteServerRequest.Builder> deleteServerRequest)
Deletes the server and the underlying AWS CloudFormation stacks (including the server's EC2 instance). When you
run this command, the server state is updated to DELETING. After the server is deleted, it is no
longer returned by DescribeServer requests. If the AWS CloudFormation stack cannot be deleted, the
server cannot be deleted.
This operation is asynchronous.
An InvalidStateException is thrown when a server deletion is already in progress. A
ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
This is a convenience which creates an instance of the DeleteServerRequest.Builder avoiding the need to
create one manually via DeleteServerRequest.builder()
deleteServerRequest - A Consumer that will call methods on
DeleteServerRequest.Builder to create a request.default CompletableFuture<DescribeAccountAttributesResponse> describeAccountAttributes(DescribeAccountAttributesRequest describeAccountAttributesRequest)
Describes your OpsWorks-CM account attributes.
This operation is synchronous.
describeAccountAttributesRequest - default CompletableFuture<DescribeAccountAttributesResponse> describeAccountAttributes(Consumer<DescribeAccountAttributesRequest.Builder> describeAccountAttributesRequest)
Describes your OpsWorks-CM account attributes.
This operation is synchronous.
This is a convenience which creates an instance of the DescribeAccountAttributesRequest.Builder avoiding
the need to create one manually via DescribeAccountAttributesRequest.builder()
describeAccountAttributesRequest - A Consumer that will call methods on
DescribeAccountAttributesRequest.Builder to
create a request.default CompletableFuture<DescribeAccountAttributesResponse> describeAccountAttributes()
Describes your OpsWorks-CM account attributes.
This operation is synchronous.
default CompletableFuture<DescribeBackupsResponse> describeBackups(DescribeBackupsRequest describeBackupsRequest)
Describes backups. The results are ordered by time, with newest backups first. If you do not specify a BackupId or ServerName, the command returns all backups.
This operation is synchronous.
A ResourceNotFoundException is thrown when the backup does not exist. A
ValidationException is raised when parameters of the request are not valid.
describeBackupsRequest - default CompletableFuture<DescribeBackupsResponse> describeBackups(Consumer<DescribeBackupsRequest.Builder> describeBackupsRequest)
Describes backups. The results are ordered by time, with newest backups first. If you do not specify a BackupId or ServerName, the command returns all backups.
This operation is synchronous.
A ResourceNotFoundException is thrown when the backup does not exist. A
ValidationException is raised when parameters of the request are not valid.
This is a convenience which creates an instance of the DescribeBackupsRequest.Builder avoiding the need
to create one manually via DescribeBackupsRequest.builder()
describeBackupsRequest - A Consumer that will call methods on
DescribeBackupsRequest.Builder to create a
request.default CompletableFuture<DescribeBackupsResponse> describeBackups()
Describes backups. The results are ordered by time, with newest backups first. If you do not specify a BackupId or ServerName, the command returns all backups.
This operation is synchronous.
A ResourceNotFoundException is thrown when the backup does not exist. A
ValidationException is raised when parameters of the request are not valid.
default DescribeBackupsPublisher describeBackupsPaginator()
Describes backups. The results are ordered by time, with newest backups first. If you do not specify a BackupId or ServerName, the command returns all backups.
This operation is synchronous.
A ResourceNotFoundException is thrown when the backup does not exist. A
ValidationException is raised when parameters of the request are not valid.
This is a variant of
describeBackups(software.amazon.awssdk.services.opsworkscm.model.DescribeBackupsRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.opsworkscm.paginators.DescribeBackupsPublisher publisher = client.describeBackupsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.opsworkscm.paginators.DescribeBackupsPublisher publisher = client.describeBackupsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.opsworkscm.model.DescribeBackupsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.opsworkscm.model.DescribeBackupsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
describeBackups(software.amazon.awssdk.services.opsworkscm.model.DescribeBackupsRequest) operation.
default DescribeBackupsPublisher describeBackupsPaginator(DescribeBackupsRequest describeBackupsRequest)
Describes backups. The results are ordered by time, with newest backups first. If you do not specify a BackupId or ServerName, the command returns all backups.
This operation is synchronous.
A ResourceNotFoundException is thrown when the backup does not exist. A
ValidationException is raised when parameters of the request are not valid.
This is a variant of
describeBackups(software.amazon.awssdk.services.opsworkscm.model.DescribeBackupsRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.opsworkscm.paginators.DescribeBackupsPublisher publisher = client.describeBackupsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.opsworkscm.paginators.DescribeBackupsPublisher publisher = client.describeBackupsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.opsworkscm.model.DescribeBackupsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.opsworkscm.model.DescribeBackupsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
describeBackups(software.amazon.awssdk.services.opsworkscm.model.DescribeBackupsRequest) operation.
describeBackupsRequest - default DescribeBackupsPublisher describeBackupsPaginator(Consumer<DescribeBackupsRequest.Builder> describeBackupsRequest)
Describes backups. The results are ordered by time, with newest backups first. If you do not specify a BackupId or ServerName, the command returns all backups.
This operation is synchronous.
A ResourceNotFoundException is thrown when the backup does not exist. A
ValidationException is raised when parameters of the request are not valid.
This is a variant of
describeBackups(software.amazon.awssdk.services.opsworkscm.model.DescribeBackupsRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.opsworkscm.paginators.DescribeBackupsPublisher publisher = client.describeBackupsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.opsworkscm.paginators.DescribeBackupsPublisher publisher = client.describeBackupsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.opsworkscm.model.DescribeBackupsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.opsworkscm.model.DescribeBackupsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
describeBackups(software.amazon.awssdk.services.opsworkscm.model.DescribeBackupsRequest) operation.
This is a convenience which creates an instance of the DescribeBackupsRequest.Builder avoiding the need
to create one manually via DescribeBackupsRequest.builder()
describeBackupsRequest - A Consumer that will call methods on
DescribeBackupsRequest.Builder to create a
request.default CompletableFuture<DescribeEventsResponse> describeEvents(DescribeEventsRequest describeEventsRequest)
Describes events for a specified server. Results are ordered by time, with newest events first.
This operation is synchronous.
A ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
describeEventsRequest - default CompletableFuture<DescribeEventsResponse> describeEvents(Consumer<DescribeEventsRequest.Builder> describeEventsRequest)
Describes events for a specified server. Results are ordered by time, with newest events first.
This operation is synchronous.
A ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
This is a convenience which creates an instance of the DescribeEventsRequest.Builder avoiding the need to
create one manually via DescribeEventsRequest.builder()
describeEventsRequest - A Consumer that will call methods on
DescribeEventsRequest.Builder to create a
request.default DescribeEventsPublisher describeEventsPaginator(DescribeEventsRequest describeEventsRequest)
Describes events for a specified server. Results are ordered by time, with newest events first.
This operation is synchronous.
A ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
This is a variant of
describeEvents(software.amazon.awssdk.services.opsworkscm.model.DescribeEventsRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.opsworkscm.paginators.DescribeEventsPublisher publisher = client.describeEventsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.opsworkscm.paginators.DescribeEventsPublisher publisher = client.describeEventsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.opsworkscm.model.DescribeEventsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.opsworkscm.model.DescribeEventsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
describeEvents(software.amazon.awssdk.services.opsworkscm.model.DescribeEventsRequest) operation.
describeEventsRequest - default DescribeEventsPublisher describeEventsPaginator(Consumer<DescribeEventsRequest.Builder> describeEventsRequest)
Describes events for a specified server. Results are ordered by time, with newest events first.
This operation is synchronous.
A ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
This is a variant of
describeEvents(software.amazon.awssdk.services.opsworkscm.model.DescribeEventsRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.opsworkscm.paginators.DescribeEventsPublisher publisher = client.describeEventsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.opsworkscm.paginators.DescribeEventsPublisher publisher = client.describeEventsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.opsworkscm.model.DescribeEventsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.opsworkscm.model.DescribeEventsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
describeEvents(software.amazon.awssdk.services.opsworkscm.model.DescribeEventsRequest) operation.
This is a convenience which creates an instance of the DescribeEventsRequest.Builder avoiding the need to
create one manually via DescribeEventsRequest.builder()
describeEventsRequest - A Consumer that will call methods on
DescribeEventsRequest.Builder to create a
request.default CompletableFuture<DescribeNodeAssociationStatusResponse> describeNodeAssociationStatus(DescribeNodeAssociationStatusRequest describeNodeAssociationStatusRequest)
Returns the current status of an existing association or disassociation request.
A ResourceNotFoundException is thrown when no recent association or disassociation request with the
specified token is found, or when the server does not exist. A ValidationException is raised when
parameters of the request are not valid.
describeNodeAssociationStatusRequest - default CompletableFuture<DescribeNodeAssociationStatusResponse> describeNodeAssociationStatus(Consumer<DescribeNodeAssociationStatusRequest.Builder> describeNodeAssociationStatusRequest)
Returns the current status of an existing association or disassociation request.
A ResourceNotFoundException is thrown when no recent association or disassociation request with the
specified token is found, or when the server does not exist. A ValidationException is raised when
parameters of the request are not valid.
This is a convenience which creates an instance of the DescribeNodeAssociationStatusRequest.Builder
avoiding the need to create one manually via DescribeNodeAssociationStatusRequest.builder()
describeNodeAssociationStatusRequest - A Consumer that will call methods on
DescribeNodeAssociationStatusRequest.Builder to
create a request.default CompletableFuture<DescribeServersResponse> describeServers(DescribeServersRequest describeServersRequest)
Lists all configuration management servers that are identified with your account. Only the stored results from Amazon DynamoDB are returned. AWS OpsWorks CM does not query other services.
This operation is synchronous.
A ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
describeServersRequest - default CompletableFuture<DescribeServersResponse> describeServers(Consumer<DescribeServersRequest.Builder> describeServersRequest)
Lists all configuration management servers that are identified with your account. Only the stored results from Amazon DynamoDB are returned. AWS OpsWorks CM does not query other services.
This operation is synchronous.
A ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
This is a convenience which creates an instance of the DescribeServersRequest.Builder avoiding the need
to create one manually via DescribeServersRequest.builder()
describeServersRequest - A Consumer that will call methods on
DescribeServersRequest.Builder to create a
request.default CompletableFuture<DescribeServersResponse> describeServers()
Lists all configuration management servers that are identified with your account. Only the stored results from Amazon DynamoDB are returned. AWS OpsWorks CM does not query other services.
This operation is synchronous.
A ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
default DescribeServersPublisher describeServersPaginator()
Lists all configuration management servers that are identified with your account. Only the stored results from Amazon DynamoDB are returned. AWS OpsWorks CM does not query other services.
This operation is synchronous.
A ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
This is a variant of
describeServers(software.amazon.awssdk.services.opsworkscm.model.DescribeServersRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.opsworkscm.paginators.DescribeServersPublisher publisher = client.describeServersPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.opsworkscm.paginators.DescribeServersPublisher publisher = client.describeServersPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.opsworkscm.model.DescribeServersResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.opsworkscm.model.DescribeServersResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
describeServers(software.amazon.awssdk.services.opsworkscm.model.DescribeServersRequest) operation.
default DescribeServersPublisher describeServersPaginator(DescribeServersRequest describeServersRequest)
Lists all configuration management servers that are identified with your account. Only the stored results from Amazon DynamoDB are returned. AWS OpsWorks CM does not query other services.
This operation is synchronous.
A ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
This is a variant of
describeServers(software.amazon.awssdk.services.opsworkscm.model.DescribeServersRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.opsworkscm.paginators.DescribeServersPublisher publisher = client.describeServersPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.opsworkscm.paginators.DescribeServersPublisher publisher = client.describeServersPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.opsworkscm.model.DescribeServersResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.opsworkscm.model.DescribeServersResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
describeServers(software.amazon.awssdk.services.opsworkscm.model.DescribeServersRequest) operation.
describeServersRequest - default DescribeServersPublisher describeServersPaginator(Consumer<DescribeServersRequest.Builder> describeServersRequest)
Lists all configuration management servers that are identified with your account. Only the stored results from Amazon DynamoDB are returned. AWS OpsWorks CM does not query other services.
This operation is synchronous.
A ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
This is a variant of
describeServers(software.amazon.awssdk.services.opsworkscm.model.DescribeServersRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.opsworkscm.paginators.DescribeServersPublisher publisher = client.describeServersPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.opsworkscm.paginators.DescribeServersPublisher publisher = client.describeServersPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.opsworkscm.model.DescribeServersResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.opsworkscm.model.DescribeServersResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
describeServers(software.amazon.awssdk.services.opsworkscm.model.DescribeServersRequest) operation.
This is a convenience which creates an instance of the DescribeServersRequest.Builder avoiding the need
to create one manually via DescribeServersRequest.builder()
describeServersRequest - A Consumer that will call methods on
DescribeServersRequest.Builder to create a
request.default CompletableFuture<DisassociateNodeResponse> disassociateNode(DisassociateNodeRequest disassociateNodeRequest)
Disassociates a node from an AWS OpsWorks CM server, and removes the node from the server's managed nodes. After a node is disassociated, the node key pair is no longer valid for accessing the configuration manager's API. For more information about how to associate a node, see AssociateNode.
A node can can only be disassociated from a server that is in a HEALTHY state. Otherwise, an
InvalidStateException is thrown. A ResourceNotFoundException is thrown when the server
does not exist. A ValidationException is raised when parameters of the request are not valid.
disassociateNodeRequest - default CompletableFuture<DisassociateNodeResponse> disassociateNode(Consumer<DisassociateNodeRequest.Builder> disassociateNodeRequest)
Disassociates a node from an AWS OpsWorks CM server, and removes the node from the server's managed nodes. After a node is disassociated, the node key pair is no longer valid for accessing the configuration manager's API. For more information about how to associate a node, see AssociateNode.
A node can can only be disassociated from a server that is in a HEALTHY state. Otherwise, an
InvalidStateException is thrown. A ResourceNotFoundException is thrown when the server
does not exist. A ValidationException is raised when parameters of the request are not valid.
This is a convenience which creates an instance of the DisassociateNodeRequest.Builder avoiding the need
to create one manually via DisassociateNodeRequest.builder()
disassociateNodeRequest - A Consumer that will call methods on
DisassociateNodeRequest.Builder to create a
request.default CompletableFuture<ExportServerEngineAttributeResponse> exportServerEngineAttribute(ExportServerEngineAttributeRequest exportServerEngineAttributeRequest)
Exports a specified server engine attribute as a base64-encoded string. For example, you can export user data that you can use in EC2 to associate nodes with a server.
This operation is synchronous.
A ValidationException is raised when parameters of the request are not valid. A
ResourceNotFoundException is thrown when the server does not exist. An
InvalidStateException is thrown when the server is in any of the following states: CREATING,
TERMINATED, FAILED or DELETING.
exportServerEngineAttributeRequest - default CompletableFuture<ExportServerEngineAttributeResponse> exportServerEngineAttribute(Consumer<ExportServerEngineAttributeRequest.Builder> exportServerEngineAttributeRequest)
Exports a specified server engine attribute as a base64-encoded string. For example, you can export user data that you can use in EC2 to associate nodes with a server.
This operation is synchronous.
A ValidationException is raised when parameters of the request are not valid. A
ResourceNotFoundException is thrown when the server does not exist. An
InvalidStateException is thrown when the server is in any of the following states: CREATING,
TERMINATED, FAILED or DELETING.
This is a convenience which creates an instance of the ExportServerEngineAttributeRequest.Builder
avoiding the need to create one manually via ExportServerEngineAttributeRequest.builder()
exportServerEngineAttributeRequest - A Consumer that will call methods on
ExportServerEngineAttributeRequest.Builder to
create a request.default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
Returns a list of tags that are applied to the specified AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise servers or backups.
listTagsForResourceRequest - default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
Returns a list of tags that are applied to the specified AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise servers or backups.
This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the
need to create one manually via ListTagsForResourceRequest.builder()
listTagsForResourceRequest - A Consumer that will call methods on
ListTagsForResourceRequest.Builder to create a
request.default ListTagsForResourcePublisher listTagsForResourcePaginator(ListTagsForResourceRequest listTagsForResourceRequest)
Returns a list of tags that are applied to the specified AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise servers or backups.
This is a variant of
listTagsForResource(software.amazon.awssdk.services.opsworkscm.model.ListTagsForResourceRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.opsworkscm.paginators.ListTagsForResourcePublisher publisher = client.listTagsForResourcePaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.opsworkscm.paginators.ListTagsForResourcePublisher publisher = client.listTagsForResourcePaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.opsworkscm.model.ListTagsForResourceResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.opsworkscm.model.ListTagsForResourceResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTagsForResource(software.amazon.awssdk.services.opsworkscm.model.ListTagsForResourceRequest)
operation.
listTagsForResourceRequest - default ListTagsForResourcePublisher listTagsForResourcePaginator(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
Returns a list of tags that are applied to the specified AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise servers or backups.
This is a variant of
listTagsForResource(software.amazon.awssdk.services.opsworkscm.model.ListTagsForResourceRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.opsworkscm.paginators.ListTagsForResourcePublisher publisher = client.listTagsForResourcePaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.opsworkscm.paginators.ListTagsForResourcePublisher publisher = client.listTagsForResourcePaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.opsworkscm.model.ListTagsForResourceResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.opsworkscm.model.ListTagsForResourceResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTagsForResource(software.amazon.awssdk.services.opsworkscm.model.ListTagsForResourceRequest)
operation.
This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the
need to create one manually via ListTagsForResourceRequest.builder()
listTagsForResourceRequest - A Consumer that will call methods on
ListTagsForResourceRequest.Builder to create a
request.default CompletableFuture<RestoreServerResponse> restoreServer(RestoreServerRequest restoreServerRequest)
Restores a backup to a server that is in a CONNECTION_LOST, HEALTHY,
RUNNING, UNHEALTHY, or TERMINATED state. When you run RestoreServer, the
server's EC2 instance is deleted, and a new EC2 instance is configured. RestoreServer maintains the existing
server endpoint, so configuration management of the server's client devices (nodes) should continue to work.
Restoring from a backup is performed by creating a new EC2 instance. If restoration is successful, and the server
is in a HEALTHY state, AWS OpsWorks CM switches traffic over to the new instance. After restoration
is finished, the old EC2 instance is maintained in a Running or Stopped state, but is
eventually terminated.
This operation is asynchronous.
An InvalidStateException is thrown when the server is not in a valid state. A
ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
restoreServerRequest - default CompletableFuture<RestoreServerResponse> restoreServer(Consumer<RestoreServerRequest.Builder> restoreServerRequest)
Restores a backup to a server that is in a CONNECTION_LOST, HEALTHY,
RUNNING, UNHEALTHY, or TERMINATED state. When you run RestoreServer, the
server's EC2 instance is deleted, and a new EC2 instance is configured. RestoreServer maintains the existing
server endpoint, so configuration management of the server's client devices (nodes) should continue to work.
Restoring from a backup is performed by creating a new EC2 instance. If restoration is successful, and the server
is in a HEALTHY state, AWS OpsWorks CM switches traffic over to the new instance. After restoration
is finished, the old EC2 instance is maintained in a Running or Stopped state, but is
eventually terminated.
This operation is asynchronous.
An InvalidStateException is thrown when the server is not in a valid state. A
ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
This is a convenience which creates an instance of the RestoreServerRequest.Builder avoiding the need to
create one manually via RestoreServerRequest.builder()
restoreServerRequest - A Consumer that will call methods on
RestoreServerRequest.Builder to create a request.default CompletableFuture<StartMaintenanceResponse> startMaintenance(StartMaintenanceRequest startMaintenanceRequest)
Manually starts server maintenance. This command can be useful if an earlier maintenance attempt failed, and the
underlying cause of maintenance failure has been resolved. The server is in an UNDER_MAINTENANCE
state while maintenance is in progress.
Maintenance can only be started on servers in HEALTHY and UNHEALTHY states. Otherwise,
an InvalidStateException is thrown. A ResourceNotFoundException is thrown when the
server does not exist. A ValidationException is raised when parameters of the request are not valid.
startMaintenanceRequest - default CompletableFuture<StartMaintenanceResponse> startMaintenance(Consumer<StartMaintenanceRequest.Builder> startMaintenanceRequest)
Manually starts server maintenance. This command can be useful if an earlier maintenance attempt failed, and the
underlying cause of maintenance failure has been resolved. The server is in an UNDER_MAINTENANCE
state while maintenance is in progress.
Maintenance can only be started on servers in HEALTHY and UNHEALTHY states. Otherwise,
an InvalidStateException is thrown. A ResourceNotFoundException is thrown when the
server does not exist. A ValidationException is raised when parameters of the request are not valid.
This is a convenience which creates an instance of the StartMaintenanceRequest.Builder avoiding the need
to create one manually via StartMaintenanceRequest.builder()
startMaintenanceRequest - A Consumer that will call methods on
StartMaintenanceRequest.Builder to create a
request.default CompletableFuture<TagResourceResponse> tagResource(TagResourceRequest tagResourceRequest)
Applies tags to an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server, or to server backups.
tagResourceRequest - default CompletableFuture<TagResourceResponse> tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
Applies tags to an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server, or to server backups.
This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to
create one manually via TagResourceRequest.builder()
tagResourceRequest - A Consumer that will call methods on
TagResourceRequest.Builder to create a request.default CompletableFuture<UntagResourceResponse> untagResource(UntagResourceRequest untagResourceRequest)
Removes specified tags from an AWS OpsWorks-CM server or backup.
untagResourceRequest - default CompletableFuture<UntagResourceResponse> untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
Removes specified tags from an AWS OpsWorks-CM server or backup.
This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to
create one manually via UntagResourceRequest.builder()
untagResourceRequest - A Consumer that will call methods on
UntagResourceRequest.Builder to create a request.default CompletableFuture<UpdateServerResponse> updateServer(UpdateServerRequest updateServerRequest)
Updates settings for a server.
This operation is synchronous.
updateServerRequest - default CompletableFuture<UpdateServerResponse> updateServer(Consumer<UpdateServerRequest.Builder> updateServerRequest)
Updates settings for a server.
This operation is synchronous.
This is a convenience which creates an instance of the UpdateServerRequest.Builder avoiding the need to
create one manually via UpdateServerRequest.builder()
updateServerRequest - A Consumer that will call methods on
UpdateServerRequest.Builder to create a request.default CompletableFuture<UpdateServerEngineAttributesResponse> updateServerEngineAttributes(UpdateServerEngineAttributesRequest updateServerEngineAttributesRequest)
Updates engine-specific attributes on a specified server. The server enters the MODIFYING state when
this operation is in progress. Only one update can occur at a time. You can use this command to reset a Chef
server's public key (CHEF_PIVOTAL_KEY) or a Puppet server's admin password (
PUPPET_ADMIN_PASSWORD).
This operation is asynchronous.
This operation can only be called for servers in HEALTHY or UNHEALTHY states.
Otherwise, an InvalidStateException is raised. A ResourceNotFoundException is thrown
when the server does not exist. A ValidationException is raised when parameters of the request are
not valid.
updateServerEngineAttributesRequest - default CompletableFuture<UpdateServerEngineAttributesResponse> updateServerEngineAttributes(Consumer<UpdateServerEngineAttributesRequest.Builder> updateServerEngineAttributesRequest)
Updates engine-specific attributes on a specified server. The server enters the MODIFYING state when
this operation is in progress. Only one update can occur at a time. You can use this command to reset a Chef
server's public key (CHEF_PIVOTAL_KEY) or a Puppet server's admin password (
PUPPET_ADMIN_PASSWORD).
This operation is asynchronous.
This operation can only be called for servers in HEALTHY or UNHEALTHY states.
Otherwise, an InvalidStateException is raised. A ResourceNotFoundException is thrown
when the server does not exist. A ValidationException is raised when parameters of the request are
not valid.
This is a convenience which creates an instance of the UpdateServerEngineAttributesRequest.Builder
avoiding the need to create one manually via UpdateServerEngineAttributesRequest.builder()
updateServerEngineAttributesRequest - A Consumer that will call methods on
UpdateServerEngineAttributesRequest.Builder to
create a request.default OpsWorksCmAsyncWaiter waiter()
OpsWorksCmAsyncWaiter using this client.
Waiters created via this method are managed by the SDK and resources will be released when the service client is closed.
OpsWorksCmAsyncWaiterdefault OpsWorksCmServiceClientConfiguration serviceClientConfiguration()
serviceClientConfiguration in interface AwsClientserviceClientConfiguration in interface SdkClientstatic OpsWorksCmAsyncClient create()
OpsWorksCmAsyncClient with the region loaded from the
DefaultAwsRegionProviderChain and credentials loaded from the
DefaultCredentialsProvider.static OpsWorksCmAsyncClientBuilder builder()
OpsWorksCmAsyncClient.Copyright © 2023. All rights reserved.