All Superinterfaces:

AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient
```
@Generated("software.amazon.awssdk:codegen")
@ThreadSafe
public interface LookoutMetricsClient
extends AwsClient
```
Service client for accessing LookoutMetrics. This can be created using the static builder() method.
This is the Amazon Lookout for Metrics API Reference. For an introduction to the service with tutorials for getting started, visit Amazon Lookout for Metrics Developer Guide.

Field Summary

Fields
Modifier and Type Field Description

static String SERVICE_METADATA_ID
Value for looking up the service's metadata from the ServiceMetadataProvider.

static String SERVICE_NAME

Method Summary

All Methods Static Methods Instance Methods Default Methods
Modifier and Type	Method	Description
`default ActivateAnomalyDetectorResponse`	`activateAnomalyDetector(Consumer<ActivateAnomalyDetectorRequest.Builder> activateAnomalyDetectorRequest)`	Activates an anomaly detector.
`default ActivateAnomalyDetectorResponse`	`activateAnomalyDetector(ActivateAnomalyDetectorRequest activateAnomalyDetectorRequest)`	Activates an anomaly detector.
`default BackTestAnomalyDetectorResponse`	`backTestAnomalyDetector(Consumer<BackTestAnomalyDetectorRequest.Builder> backTestAnomalyDetectorRequest)`	Runs a backtest for anomaly detection for the specified resource.
`default BackTestAnomalyDetectorResponse`	`backTestAnomalyDetector(BackTestAnomalyDetectorRequest backTestAnomalyDetectorRequest)`	Runs a backtest for anomaly detection for the specified resource.
`static LookoutMetricsClientBuilder`	`builder()`	Create a builder that can be used to configure and create a `LookoutMetricsClient`.
`static LookoutMetricsClient`	`create()`	Create a `LookoutMetricsClient` with the region loaded from the `DefaultAwsRegionProviderChain` and credentials loaded from the `DefaultCredentialsProvider`.
`default CreateAlertResponse`	`createAlert(Consumer<CreateAlertRequest.Builder> createAlertRequest)`	Creates an alert for an anomaly detector.
`default CreateAlertResponse`	`createAlert(CreateAlertRequest createAlertRequest)`	Creates an alert for an anomaly detector.
`default CreateAnomalyDetectorResponse`	`createAnomalyDetector(Consumer<CreateAnomalyDetectorRequest.Builder> createAnomalyDetectorRequest)`	Creates an anomaly detector.
`default CreateAnomalyDetectorResponse`	`createAnomalyDetector(CreateAnomalyDetectorRequest createAnomalyDetectorRequest)`	Creates an anomaly detector.
`default CreateMetricSetResponse`	`createMetricSet(Consumer<CreateMetricSetRequest.Builder> createMetricSetRequest)`	Creates a dataset.
`default CreateMetricSetResponse`	`createMetricSet(CreateMetricSetRequest createMetricSetRequest)`	Creates a dataset.
`default DeactivateAnomalyDetectorResponse`	`deactivateAnomalyDetector(Consumer<DeactivateAnomalyDetectorRequest.Builder> deactivateAnomalyDetectorRequest)`	Deactivates an anomaly detector.
`default DeactivateAnomalyDetectorResponse`	`deactivateAnomalyDetector(DeactivateAnomalyDetectorRequest deactivateAnomalyDetectorRequest)`	Deactivates an anomaly detector.
`default DeleteAlertResponse`	`deleteAlert(Consumer<DeleteAlertRequest.Builder> deleteAlertRequest)`	Deletes an alert.
`default DeleteAlertResponse`	`deleteAlert(DeleteAlertRequest deleteAlertRequest)`	Deletes an alert.
`default DeleteAnomalyDetectorResponse`	`deleteAnomalyDetector(Consumer<DeleteAnomalyDetectorRequest.Builder> deleteAnomalyDetectorRequest)`	Deletes a detector.
`default DeleteAnomalyDetectorResponse`	`deleteAnomalyDetector(DeleteAnomalyDetectorRequest deleteAnomalyDetectorRequest)`	Deletes a detector.
`default DescribeAlertResponse`	`describeAlert(Consumer<DescribeAlertRequest.Builder> describeAlertRequest)`	Describes an alert.
`default DescribeAlertResponse`	`describeAlert(DescribeAlertRequest describeAlertRequest)`	Describes an alert.
`default DescribeAnomalyDetectionExecutionsResponse`	`describeAnomalyDetectionExecutions(Consumer<DescribeAnomalyDetectionExecutionsRequest.Builder> describeAnomalyDetectionExecutionsRequest)`	Returns information about the status of the specified anomaly detection jobs.
`default DescribeAnomalyDetectionExecutionsResponse`	`describeAnomalyDetectionExecutions(DescribeAnomalyDetectionExecutionsRequest describeAnomalyDetectionExecutionsRequest)`	Returns information about the status of the specified anomaly detection jobs.
`default DescribeAnomalyDetectionExecutionsIterable`	`describeAnomalyDetectionExecutionsPaginator(Consumer<DescribeAnomalyDetectionExecutionsRequest.Builder> describeAnomalyDetectionExecutionsRequest)`	Returns information about the status of the specified anomaly detection jobs.
`default DescribeAnomalyDetectionExecutionsIterable`	`describeAnomalyDetectionExecutionsPaginator(DescribeAnomalyDetectionExecutionsRequest describeAnomalyDetectionExecutionsRequest)`	Returns information about the status of the specified anomaly detection jobs.
`default DescribeAnomalyDetectorResponse`	`describeAnomalyDetector(Consumer<DescribeAnomalyDetectorRequest.Builder> describeAnomalyDetectorRequest)`	Describes a detector.
`default DescribeAnomalyDetectorResponse`	`describeAnomalyDetector(DescribeAnomalyDetectorRequest describeAnomalyDetectorRequest)`	Describes a detector.
`default DescribeMetricSetResponse`	`describeMetricSet(Consumer<DescribeMetricSetRequest.Builder> describeMetricSetRequest)`	Describes a dataset.
`default DescribeMetricSetResponse`	`describeMetricSet(DescribeMetricSetRequest describeMetricSetRequest)`	Describes a dataset.
`default DetectMetricSetConfigResponse`	`detectMetricSetConfig(Consumer<DetectMetricSetConfigRequest.Builder> detectMetricSetConfigRequest)`	Detects an Amazon S3 dataset's file format, interval, and offset.
`default DetectMetricSetConfigResponse`	`detectMetricSetConfig(DetectMetricSetConfigRequest detectMetricSetConfigRequest)`	Detects an Amazon S3 dataset's file format, interval, and offset.
`default GetAnomalyGroupResponse`	`getAnomalyGroup(Consumer<GetAnomalyGroupRequest.Builder> getAnomalyGroupRequest)`	Returns details about a group of anomalous metrics.
`default GetAnomalyGroupResponse`	`getAnomalyGroup(GetAnomalyGroupRequest getAnomalyGroupRequest)`	Returns details about a group of anomalous metrics.
`default GetDataQualityMetricsResponse`	`getDataQualityMetrics(Consumer<GetDataQualityMetricsRequest.Builder> getDataQualityMetricsRequest)`	Returns details about the requested data quality metrics.
`default GetDataQualityMetricsResponse`	`getDataQualityMetrics(GetDataQualityMetricsRequest getDataQualityMetricsRequest)`	Returns details about the requested data quality metrics.
`default GetFeedbackResponse`	`getFeedback(Consumer<GetFeedbackRequest.Builder> getFeedbackRequest)`	Get feedback for an anomaly group.
`default GetFeedbackResponse`	`getFeedback(GetFeedbackRequest getFeedbackRequest)`	Get feedback for an anomaly group.
`default GetFeedbackIterable`	`getFeedbackPaginator(Consumer<GetFeedbackRequest.Builder> getFeedbackRequest)`	Get feedback for an anomaly group.
`default GetFeedbackIterable`	`getFeedbackPaginator(GetFeedbackRequest getFeedbackRequest)`	Get feedback for an anomaly group.
`default GetSampleDataResponse`	`getSampleData(Consumer<GetSampleDataRequest.Builder> getSampleDataRequest)`	Returns a selection of sample records from an Amazon S3 datasource.
`default GetSampleDataResponse`	`getSampleData(GetSampleDataRequest getSampleDataRequest)`	Returns a selection of sample records from an Amazon S3 datasource.
`default ListAlertsResponse`	`listAlerts(Consumer<ListAlertsRequest.Builder> listAlertsRequest)`	Lists the alerts attached to a detector.
`default ListAlertsResponse`	`listAlerts(ListAlertsRequest listAlertsRequest)`	Lists the alerts attached to a detector.
`default ListAlertsIterable`	`listAlertsPaginator(Consumer<ListAlertsRequest.Builder> listAlertsRequest)`	Lists the alerts attached to a detector.
`default ListAlertsIterable`	`listAlertsPaginator(ListAlertsRequest listAlertsRequest)`	Lists the alerts attached to a detector.
`default ListAnomalyDetectorsResponse`	`listAnomalyDetectors(Consumer<ListAnomalyDetectorsRequest.Builder> listAnomalyDetectorsRequest)`	Lists the detectors in the current AWS Region.
`default ListAnomalyDetectorsResponse`	`listAnomalyDetectors(ListAnomalyDetectorsRequest listAnomalyDetectorsRequest)`	Lists the detectors in the current AWS Region.
`default ListAnomalyDetectorsIterable`	`listAnomalyDetectorsPaginator(Consumer<ListAnomalyDetectorsRequest.Builder> listAnomalyDetectorsRequest)`	Lists the detectors in the current AWS Region.
`default ListAnomalyDetectorsIterable`	`listAnomalyDetectorsPaginator(ListAnomalyDetectorsRequest listAnomalyDetectorsRequest)`	Lists the detectors in the current AWS Region.
`default ListAnomalyGroupRelatedMetricsResponse`	`listAnomalyGroupRelatedMetrics(Consumer<ListAnomalyGroupRelatedMetricsRequest.Builder> listAnomalyGroupRelatedMetricsRequest)`	Returns a list of measures that are potential causes or effects of an anomaly group.
`default ListAnomalyGroupRelatedMetricsResponse`	`listAnomalyGroupRelatedMetrics(ListAnomalyGroupRelatedMetricsRequest listAnomalyGroupRelatedMetricsRequest)`	Returns a list of measures that are potential causes or effects of an anomaly group.
`default ListAnomalyGroupRelatedMetricsIterable`	`listAnomalyGroupRelatedMetricsPaginator(Consumer<ListAnomalyGroupRelatedMetricsRequest.Builder> listAnomalyGroupRelatedMetricsRequest)`	Returns a list of measures that are potential causes or effects of an anomaly group.
`default ListAnomalyGroupRelatedMetricsIterable`	`listAnomalyGroupRelatedMetricsPaginator(ListAnomalyGroupRelatedMetricsRequest listAnomalyGroupRelatedMetricsRequest)`	Returns a list of measures that are potential causes or effects of an anomaly group.
`default ListAnomalyGroupSummariesResponse`	`listAnomalyGroupSummaries(Consumer<ListAnomalyGroupSummariesRequest.Builder> listAnomalyGroupSummariesRequest)`	Returns a list of anomaly groups.
`default ListAnomalyGroupSummariesResponse`	`listAnomalyGroupSummaries(ListAnomalyGroupSummariesRequest listAnomalyGroupSummariesRequest)`	Returns a list of anomaly groups.
`default ListAnomalyGroupSummariesIterable`	`listAnomalyGroupSummariesPaginator(Consumer<ListAnomalyGroupSummariesRequest.Builder> listAnomalyGroupSummariesRequest)`	Returns a list of anomaly groups.
`default ListAnomalyGroupSummariesIterable`	`listAnomalyGroupSummariesPaginator(ListAnomalyGroupSummariesRequest listAnomalyGroupSummariesRequest)`	Returns a list of anomaly groups.
`default ListAnomalyGroupTimeSeriesResponse`	`listAnomalyGroupTimeSeries(Consumer<ListAnomalyGroupTimeSeriesRequest.Builder> listAnomalyGroupTimeSeriesRequest)`	Gets a list of anomalous metrics for a measure in an anomaly group.
`default ListAnomalyGroupTimeSeriesResponse`	`listAnomalyGroupTimeSeries(ListAnomalyGroupTimeSeriesRequest listAnomalyGroupTimeSeriesRequest)`	Gets a list of anomalous metrics for a measure in an anomaly group.
`default ListAnomalyGroupTimeSeriesIterable`	`listAnomalyGroupTimeSeriesPaginator(Consumer<ListAnomalyGroupTimeSeriesRequest.Builder> listAnomalyGroupTimeSeriesRequest)`	Gets a list of anomalous metrics for a measure in an anomaly group.
`default ListAnomalyGroupTimeSeriesIterable`	`listAnomalyGroupTimeSeriesPaginator(ListAnomalyGroupTimeSeriesRequest listAnomalyGroupTimeSeriesRequest)`	Gets a list of anomalous metrics for a measure in an anomaly group.
`default ListMetricSetsResponse`	`listMetricSets(Consumer<ListMetricSetsRequest.Builder> listMetricSetsRequest)`	Lists the datasets in the current AWS Region.
`default ListMetricSetsResponse`	`listMetricSets(ListMetricSetsRequest listMetricSetsRequest)`	Lists the datasets in the current AWS Region.
`default ListMetricSetsIterable`	`listMetricSetsPaginator(Consumer<ListMetricSetsRequest.Builder> listMetricSetsRequest)`	Lists the datasets in the current AWS Region.
`default ListMetricSetsIterable`	`listMetricSetsPaginator(ListMetricSetsRequest listMetricSetsRequest)`	Lists the datasets in the current AWS Region.
`default ListTagsForResourceResponse`	`listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)`	Gets a list of tags for a detector, dataset, or alert.
`default ListTagsForResourceResponse`	`listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)`	Gets a list of tags for a detector, dataset, or alert.
`default PutFeedbackResponse`	`putFeedback(Consumer<PutFeedbackRequest.Builder> putFeedbackRequest)`	Add feedback for an anomalous metric.
`default PutFeedbackResponse`	`putFeedback(PutFeedbackRequest putFeedbackRequest)`	Add feedback for an anomalous metric.
`default LookoutMetricsServiceClientConfiguration`	`serviceClientConfiguration()`
`static ServiceMetadata`	`serviceMetadata()`
`default TagResourceResponse`	`tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)`	Adds tags to a detector, dataset, or alert.
`default TagResourceResponse`	`tagResource(TagResourceRequest tagResourceRequest)`	Adds tags to a detector, dataset, or alert.
`default UntagResourceResponse`	`untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)`	Removes tags from a detector, dataset, or alert.
`default UntagResourceResponse`	`untagResource(UntagResourceRequest untagResourceRequest)`	Removes tags from a detector, dataset, or alert.
`default UpdateAlertResponse`	`updateAlert(Consumer<UpdateAlertRequest.Builder> updateAlertRequest)`	Make changes to an existing alert.
`default UpdateAlertResponse`	`updateAlert(UpdateAlertRequest updateAlertRequest)`	Make changes to an existing alert.
`default UpdateAnomalyDetectorResponse`	`updateAnomalyDetector(Consumer<UpdateAnomalyDetectorRequest.Builder> updateAnomalyDetectorRequest)`	Updates a detector.
`default UpdateAnomalyDetectorResponse`	`updateAnomalyDetector(UpdateAnomalyDetectorRequest updateAnomalyDetectorRequest)`	Updates a detector.
`default UpdateMetricSetResponse`	`updateMetricSet(Consumer<UpdateMetricSetRequest.Builder> updateMetricSetRequest)`	Updates a dataset.
`default UpdateMetricSetResponse`	`updateMetricSet(UpdateMetricSetRequest updateMetricSetRequest)`	Updates a dataset.

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close

Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName

- Field Detail
  - SERVICE_NAME
```
static final String SERVICE_NAME
```
    See Also:
    
    Constant Field Values
  - SERVICE_METADATA_ID
```
static final String SERVICE_METADATA_ID
```
    Value for looking up the service's metadata from the ServiceMetadataProvider.
    
    See Also:
    
    Constant Field Values
- Method Detail
  - activateAnomalyDetector
```
default ActivateAnomalyDetectorResponse activateAnomalyDetector(ActivateAnomalyDetectorRequest activateAnomalyDetectorRequest)
                                                         throws ValidationException,
                                                                ResourceNotFoundException,
                                                                AccessDeniedException,
                                                                TooManyRequestsException,
                                                                InternalServerException,
                                                                ConflictException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                LookoutMetricsException
```
    Activates an anomaly detector.
    
    Parameters:
    
    activateAnomalyDetectorRequest -
    
    Returns:
    
    Result of the ActivateAnomalyDetector operation returned by the service.
    
    Throws:
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    ConflictException - There was a conflict processing the request. Try your request again.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - activateAnomalyDetector
```
default ActivateAnomalyDetectorResponse activateAnomalyDetector(Consumer<ActivateAnomalyDetectorRequest.Builder> activateAnomalyDetectorRequest)
                                                         throws ValidationException,
                                                                ResourceNotFoundException,
                                                                AccessDeniedException,
                                                                TooManyRequestsException,
                                                                InternalServerException,
                                                                ConflictException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                LookoutMetricsException
```
    Activates an anomaly detector.
    
    This is a convenience which creates an instance of the ActivateAnomalyDetectorRequest.Builder avoiding the need to create one manually via ActivateAnomalyDetectorRequest.builder()
    
    Parameters:
    
    activateAnomalyDetectorRequest - A Consumer that will call methods on ActivateAnomalyDetectorRequest.Builder to create a request.
    
    Returns:
    
    Result of the ActivateAnomalyDetector operation returned by the service.
    
    Throws:
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    ConflictException - There was a conflict processing the request. Try your request again.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - backTestAnomalyDetector
```
default BackTestAnomalyDetectorResponse backTestAnomalyDetector(BackTestAnomalyDetectorRequest backTestAnomalyDetectorRequest)
                                                         throws ValidationException,
                                                                ResourceNotFoundException,
                                                                AccessDeniedException,
                                                                TooManyRequestsException,
                                                                InternalServerException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                LookoutMetricsException
```
    Runs a backtest for anomaly detection for the specified resource.
    
    Parameters:
    
    backTestAnomalyDetectorRequest -
    
    Returns:
    
    Result of the BackTestAnomalyDetector operation returned by the service.
    
    Throws:
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - backTestAnomalyDetector
```
default BackTestAnomalyDetectorResponse backTestAnomalyDetector(Consumer<BackTestAnomalyDetectorRequest.Builder> backTestAnomalyDetectorRequest)
                                                         throws ValidationException,
                                                                ResourceNotFoundException,
                                                                AccessDeniedException,
                                                                TooManyRequestsException,
                                                                InternalServerException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                LookoutMetricsException
```
    Runs a backtest for anomaly detection for the specified resource.
    
    This is a convenience which creates an instance of the BackTestAnomalyDetectorRequest.Builder avoiding the need to create one manually via BackTestAnomalyDetectorRequest.builder()
    
    Parameters:
    
    backTestAnomalyDetectorRequest - A Consumer that will call methods on BackTestAnomalyDetectorRequest.Builder to create a request.
    
    Returns:
    
    Result of the BackTestAnomalyDetector operation returned by the service.
    
    Throws:
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createAlert
```
default CreateAlertResponse createAlert(CreateAlertRequest createAlertRequest)
                                 throws ConflictException,
                                        ValidationException,
                                        ServiceQuotaExceededException,
                                        AccessDeniedException,
                                        TooManyRequestsException,
                                        ResourceNotFoundException,
                                        InternalServerException,
                                        AwsServiceException,
                                        SdkClientException,
                                        LookoutMetricsException
```
    Creates an alert for an anomaly detector.
    
    Parameters:
    
    createAlertRequest -
    
    Returns:
    
    Result of the CreateAlert operation returned by the service.
    
    Throws:
    
    ConflictException - There was a conflict processing the request. Try your request again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ServiceQuotaExceededException - The request exceeded the service's quotas. Check the service quotas and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createAlert
```
default CreateAlertResponse createAlert(Consumer<CreateAlertRequest.Builder> createAlertRequest)
                                 throws ConflictException,
                                        ValidationException,
                                        ServiceQuotaExceededException,
                                        AccessDeniedException,
                                        TooManyRequestsException,
                                        ResourceNotFoundException,
                                        InternalServerException,
                                        AwsServiceException,
                                        SdkClientException,
                                        LookoutMetricsException
```
    Creates an alert for an anomaly detector.
    
    This is a convenience which creates an instance of the CreateAlertRequest.Builder avoiding the need to create one manually via CreateAlertRequest.builder()
    
    Parameters:
    
    createAlertRequest - A Consumer that will call methods on CreateAlertRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateAlert operation returned by the service.
    
    Throws:
    
    ConflictException - There was a conflict processing the request. Try your request again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ServiceQuotaExceededException - The request exceeded the service's quotas. Check the service quotas and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createAnomalyDetector
```
default CreateAnomalyDetectorResponse createAnomalyDetector(CreateAnomalyDetectorRequest createAnomalyDetectorRequest)
                                                     throws ConflictException,
                                                            ValidationException,
                                                            ServiceQuotaExceededException,
                                                            AccessDeniedException,
                                                            TooManyRequestsException,
                                                            InternalServerException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            LookoutMetricsException
```
    Creates an anomaly detector.
    
    Parameters:
    
    createAnomalyDetectorRequest -
    
    Returns:
    
    Result of the CreateAnomalyDetector operation returned by the service.
    
    Throws:
    
    ConflictException - There was a conflict processing the request. Try your request again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ServiceQuotaExceededException - The request exceeded the service's quotas. Check the service quotas and try again.
    
    ConflictException - There was a conflict processing the request. Try your request again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createAnomalyDetector
```
default CreateAnomalyDetectorResponse createAnomalyDetector(Consumer<CreateAnomalyDetectorRequest.Builder> createAnomalyDetectorRequest)
                                                     throws ConflictException,
                                                            ValidationException,
                                                            ServiceQuotaExceededException,
                                                            AccessDeniedException,
                                                            TooManyRequestsException,
                                                            InternalServerException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            LookoutMetricsException
```
    Creates an anomaly detector.
    
    This is a convenience which creates an instance of the CreateAnomalyDetectorRequest.Builder avoiding the need to create one manually via CreateAnomalyDetectorRequest.builder()
    
    Parameters:
    
    createAnomalyDetectorRequest - A Consumer that will call methods on CreateAnomalyDetectorRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateAnomalyDetector operation returned by the service.
    
    Throws:
    
    ConflictException - There was a conflict processing the request. Try your request again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ServiceQuotaExceededException - The request exceeded the service's quotas. Check the service quotas and try again.
    
    ConflictException - There was a conflict processing the request. Try your request again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createMetricSet
```
default CreateMetricSetResponse createMetricSet(CreateMetricSetRequest createMetricSetRequest)
                                         throws ConflictException,
                                                ValidationException,
                                                ResourceNotFoundException,
                                                ServiceQuotaExceededException,
                                                AccessDeniedException,
                                                TooManyRequestsException,
                                                InternalServerException,
                                                AwsServiceException,
                                                SdkClientException,
                                                LookoutMetricsException
```
    Creates a dataset.
    
    Parameters:
    
    createMetricSetRequest -
    
    Returns:
    
    Result of the CreateMetricSet operation returned by the service.
    
    Throws:
    
    ConflictException - There was a conflict processing the request. Try your request again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ServiceQuotaExceededException - The request exceeded the service's quotas. Check the service quotas and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createMetricSet
```
default CreateMetricSetResponse createMetricSet(Consumer<CreateMetricSetRequest.Builder> createMetricSetRequest)
                                         throws ConflictException,
                                                ValidationException,
                                                ResourceNotFoundException,
                                                ServiceQuotaExceededException,
                                                AccessDeniedException,
                                                TooManyRequestsException,
                                                InternalServerException,
                                                AwsServiceException,
                                                SdkClientException,
                                                LookoutMetricsException
```
    Creates a dataset.
    
    This is a convenience which creates an instance of the CreateMetricSetRequest.Builder avoiding the need to create one manually via CreateMetricSetRequest.builder()
    
    Parameters:
    
    createMetricSetRequest - A Consumer that will call methods on CreateMetricSetRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateMetricSet operation returned by the service.
    
    Throws:
    
    ConflictException - There was a conflict processing the request. Try your request again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ServiceQuotaExceededException - The request exceeded the service's quotas. Check the service quotas and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deactivateAnomalyDetector
```
default DeactivateAnomalyDetectorResponse deactivateAnomalyDetector(DeactivateAnomalyDetectorRequest deactivateAnomalyDetectorRequest)
                                                             throws ValidationException,
                                                                    ConflictException,
                                                                    ResourceNotFoundException,
                                                                    AccessDeniedException,
                                                                    TooManyRequestsException,
                                                                    InternalServerException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    LookoutMetricsException
```
    Deactivates an anomaly detector.
    
    Parameters:
    
    deactivateAnomalyDetectorRequest -
    
    Returns:
    
    Result of the DeactivateAnomalyDetector operation returned by the service.
    
    Throws:
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ConflictException - There was a conflict processing the request. Try your request again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deactivateAnomalyDetector
```
default DeactivateAnomalyDetectorResponse deactivateAnomalyDetector(Consumer<DeactivateAnomalyDetectorRequest.Builder> deactivateAnomalyDetectorRequest)
                                                             throws ValidationException,
                                                                    ConflictException,
                                                                    ResourceNotFoundException,
                                                                    AccessDeniedException,
                                                                    TooManyRequestsException,
                                                                    InternalServerException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    LookoutMetricsException
```
    Deactivates an anomaly detector.
    
    This is a convenience which creates an instance of the DeactivateAnomalyDetectorRequest.Builder avoiding the need to create one manually via DeactivateAnomalyDetectorRequest.builder()
    
    Parameters:
    
    deactivateAnomalyDetectorRequest - A Consumer that will call methods on DeactivateAnomalyDetectorRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeactivateAnomalyDetector operation returned by the service.
    
    Throws:
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ConflictException - There was a conflict processing the request. Try your request again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteAlert
```
default DeleteAlertResponse deleteAlert(DeleteAlertRequest deleteAlertRequest)
                                 throws ResourceNotFoundException,
                                        ValidationException,
                                        TooManyRequestsException,
                                        AccessDeniedException,
                                        InternalServerException,
                                        AwsServiceException,
                                        SdkClientException,
                                        LookoutMetricsException
```
    Deletes an alert.
    
    Parameters:
    
    deleteAlertRequest -
    
    Returns:
    
    Result of the DeleteAlert operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteAlert
```
default DeleteAlertResponse deleteAlert(Consumer<DeleteAlertRequest.Builder> deleteAlertRequest)
                                 throws ResourceNotFoundException,
                                        ValidationException,
                                        TooManyRequestsException,
                                        AccessDeniedException,
                                        InternalServerException,
                                        AwsServiceException,
                                        SdkClientException,
                                        LookoutMetricsException
```
    Deletes an alert.
    
    This is a convenience which creates an instance of the DeleteAlertRequest.Builder avoiding the need to create one manually via DeleteAlertRequest.builder()
    
    Parameters:
    
    deleteAlertRequest - A Consumer that will call methods on DeleteAlertRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteAlert operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteAnomalyDetector
```
default DeleteAnomalyDetectorResponse deleteAnomalyDetector(DeleteAnomalyDetectorRequest deleteAnomalyDetectorRequest)
                                                     throws ResourceNotFoundException,
                                                            ValidationException,
                                                            ConflictException,
                                                            TooManyRequestsException,
                                                            AccessDeniedException,
                                                            InternalServerException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            LookoutMetricsException
```
    Deletes a detector. Deleting an anomaly detector will delete all of its corresponding resources including any configured datasets and alerts.
    
    Parameters:
    
    deleteAnomalyDetectorRequest -
    
    Returns:
    
    Result of the DeleteAnomalyDetector operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ConflictException - There was a conflict processing the request. Try your request again.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteAnomalyDetector
```
default DeleteAnomalyDetectorResponse deleteAnomalyDetector(Consumer<DeleteAnomalyDetectorRequest.Builder> deleteAnomalyDetectorRequest)
                                                     throws ResourceNotFoundException,
                                                            ValidationException,
                                                            ConflictException,
                                                            TooManyRequestsException,
                                                            AccessDeniedException,
                                                            InternalServerException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            LookoutMetricsException
```
    Deletes a detector. Deleting an anomaly detector will delete all of its corresponding resources including any configured datasets and alerts.
    
    This is a convenience which creates an instance of the DeleteAnomalyDetectorRequest.Builder avoiding the need to create one manually via DeleteAnomalyDetectorRequest.builder()
    
    Parameters:
    
    deleteAnomalyDetectorRequest - A Consumer that will call methods on DeleteAnomalyDetectorRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteAnomalyDetector operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ConflictException - There was a conflict processing the request. Try your request again.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeAlert
```
default DescribeAlertResponse describeAlert(DescribeAlertRequest describeAlertRequest)
                                     throws ResourceNotFoundException,
                                            ValidationException,
                                            AccessDeniedException,
                                            InternalServerException,
                                            TooManyRequestsException,
                                            AwsServiceException,
                                            SdkClientException,
                                            LookoutMetricsException
```
    Describes an alert.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    Parameters:
    
    describeAlertRequest -
    
    Returns:
    
    Result of the DescribeAlert operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeAlert
```
default DescribeAlertResponse describeAlert(Consumer<DescribeAlertRequest.Builder> describeAlertRequest)
                                     throws ResourceNotFoundException,
                                            ValidationException,
                                            AccessDeniedException,
                                            InternalServerException,
                                            TooManyRequestsException,
                                            AwsServiceException,
                                            SdkClientException,
                                            LookoutMetricsException
```
    Describes an alert.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    This is a convenience which creates an instance of the DescribeAlertRequest.Builder avoiding the need to create one manually via DescribeAlertRequest.builder()
    
    Parameters:
    
    describeAlertRequest - A Consumer that will call methods on DescribeAlertRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeAlert operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeAnomalyDetectionExecutions
```
default DescribeAnomalyDetectionExecutionsResponse describeAnomalyDetectionExecutions(DescribeAnomalyDetectionExecutionsRequest describeAnomalyDetectionExecutionsRequest)
                                                                               throws ResourceNotFoundException,
                                                                                      ValidationException,
                                                                                      AccessDeniedException,
                                                                                      TooManyRequestsException,
                                                                                      InternalServerException,
                                                                                      AwsServiceException,
                                                                                      SdkClientException,
                                                                                      LookoutMetricsException
```
    Returns information about the status of the specified anomaly detection jobs.
    
    Parameters:
    
    describeAnomalyDetectionExecutionsRequest -
    
    Returns:
    
    Result of the DescribeAnomalyDetectionExecutions operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeAnomalyDetectionExecutions
```
default DescribeAnomalyDetectionExecutionsResponse describeAnomalyDetectionExecutions(Consumer<DescribeAnomalyDetectionExecutionsRequest.Builder> describeAnomalyDetectionExecutionsRequest)
                                                                               throws ResourceNotFoundException,
                                                                                      ValidationException,
                                                                                      AccessDeniedException,
                                                                                      TooManyRequestsException,
                                                                                      InternalServerException,
                                                                                      AwsServiceException,
                                                                                      SdkClientException,
                                                                                      LookoutMetricsException
```
    Returns information about the status of the specified anomaly detection jobs.
    
    This is a convenience which creates an instance of the DescribeAnomalyDetectionExecutionsRequest.Builder avoiding the need to create one manually via DescribeAnomalyDetectionExecutionsRequest.builder()
    
    Parameters:
    
    describeAnomalyDetectionExecutionsRequest - A Consumer that will call methods on DescribeAnomalyDetectionExecutionsRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeAnomalyDetectionExecutions operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeAnomalyDetectionExecutionsPaginator
```
default DescribeAnomalyDetectionExecutionsIterable describeAnomalyDetectionExecutionsPaginator(DescribeAnomalyDetectionExecutionsRequest describeAnomalyDetectionExecutionsRequest)
                                                                                        throws ResourceNotFoundException,
                                                                                               ValidationException,
                                                                                               AccessDeniedException,
                                                                                               TooManyRequestsException,
                                                                                               InternalServerException,
                                                                                               AwsServiceException,
                                                                                               SdkClientException,
                                                                                               LookoutMetricsException
```
    Returns information about the status of the specified anomaly detection jobs.
    
    This is a variant of describeAnomalyDetectionExecutions(software.amazon.awssdk.services.lookoutmetrics.model.DescribeAnomalyDetectionExecutionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.DescribeAnomalyDetectionExecutionsIterable responses = client.describeAnomalyDetectionExecutionsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.DescribeAnomalyDetectionExecutionsIterable responses = client .describeAnomalyDetectionExecutionsPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.DescribeAnomalyDetectionExecutionsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.DescribeAnomalyDetectionExecutionsIterable responses = client.describeAnomalyDetectionExecutionsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeAnomalyDetectionExecutions(software.amazon.awssdk.services.lookoutmetrics.model.DescribeAnomalyDetectionExecutionsRequest) operation.
    Parameters:
    
    describeAnomalyDetectionExecutionsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeAnomalyDetectionExecutionsPaginator
```
default DescribeAnomalyDetectionExecutionsIterable describeAnomalyDetectionExecutionsPaginator(Consumer<DescribeAnomalyDetectionExecutionsRequest.Builder> describeAnomalyDetectionExecutionsRequest)
                                                                                        throws ResourceNotFoundException,
                                                                                               ValidationException,
                                                                                               AccessDeniedException,
                                                                                               TooManyRequestsException,
                                                                                               InternalServerException,
                                                                                               AwsServiceException,
                                                                                               SdkClientException,
                                                                                               LookoutMetricsException
```
    Returns information about the status of the specified anomaly detection jobs.
    
    This is a variant of describeAnomalyDetectionExecutions(software.amazon.awssdk.services.lookoutmetrics.model.DescribeAnomalyDetectionExecutionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.DescribeAnomalyDetectionExecutionsIterable responses = client.describeAnomalyDetectionExecutionsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.DescribeAnomalyDetectionExecutionsIterable responses = client .describeAnomalyDetectionExecutionsPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.DescribeAnomalyDetectionExecutionsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.DescribeAnomalyDetectionExecutionsIterable responses = client.describeAnomalyDetectionExecutionsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the describeAnomalyDetectionExecutions(software.amazon.awssdk.services.lookoutmetrics.model.DescribeAnomalyDetectionExecutionsRequest) operation.
    
    This is a convenience which creates an instance of the DescribeAnomalyDetectionExecutionsRequest.Builder avoiding the need to create one manually via DescribeAnomalyDetectionExecutionsRequest.builder()
    Parameters:
    
    describeAnomalyDetectionExecutionsRequest - A Consumer that will call methods on DescribeAnomalyDetectionExecutionsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeAnomalyDetector
```
default DescribeAnomalyDetectorResponse describeAnomalyDetector(DescribeAnomalyDetectorRequest describeAnomalyDetectorRequest)
                                                         throws ResourceNotFoundException,
                                                                ValidationException,
                                                                AccessDeniedException,
                                                                InternalServerException,
                                                                TooManyRequestsException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                LookoutMetricsException
```
    Describes a detector.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    Parameters:
    
    describeAnomalyDetectorRequest -
    
    Returns:
    
    Result of the DescribeAnomalyDetector operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeAnomalyDetector
```
default DescribeAnomalyDetectorResponse describeAnomalyDetector(Consumer<DescribeAnomalyDetectorRequest.Builder> describeAnomalyDetectorRequest)
                                                         throws ResourceNotFoundException,
                                                                ValidationException,
                                                                AccessDeniedException,
                                                                InternalServerException,
                                                                TooManyRequestsException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                LookoutMetricsException
```
    Describes a detector.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    This is a convenience which creates an instance of the DescribeAnomalyDetectorRequest.Builder avoiding the need to create one manually via DescribeAnomalyDetectorRequest.builder()
    
    Parameters:
    
    describeAnomalyDetectorRequest - A Consumer that will call methods on DescribeAnomalyDetectorRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeAnomalyDetector operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeMetricSet
```
default DescribeMetricSetResponse describeMetricSet(DescribeMetricSetRequest describeMetricSetRequest)
                                             throws ResourceNotFoundException,
                                                    ValidationException,
                                                    AccessDeniedException,
                                                    TooManyRequestsException,
                                                    InternalServerException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    LookoutMetricsException
```
    Describes a dataset.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    Parameters:
    
    describeMetricSetRequest -
    
    Returns:
    
    Result of the DescribeMetricSet operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeMetricSet
```
default DescribeMetricSetResponse describeMetricSet(Consumer<DescribeMetricSetRequest.Builder> describeMetricSetRequest)
                                             throws ResourceNotFoundException,
                                                    ValidationException,
                                                    AccessDeniedException,
                                                    TooManyRequestsException,
                                                    InternalServerException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    LookoutMetricsException
```
    Describes a dataset.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    This is a convenience which creates an instance of the DescribeMetricSetRequest.Builder avoiding the need to create one manually via DescribeMetricSetRequest.builder()
    
    Parameters:
    
    describeMetricSetRequest - A Consumer that will call methods on DescribeMetricSetRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeMetricSet operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - detectMetricSetConfig
```
default DetectMetricSetConfigResponse detectMetricSetConfig(DetectMetricSetConfigRequest detectMetricSetConfigRequest)
                                                     throws ResourceNotFoundException,
                                                            ValidationException,
                                                            InternalServerException,
                                                            AccessDeniedException,
                                                            TooManyRequestsException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            LookoutMetricsException
```
    Detects an Amazon S3 dataset's file format, interval, and offset.
    
    Parameters:
    
    detectMetricSetConfigRequest -
    
    Returns:
    
    Result of the DetectMetricSetConfig operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - detectMetricSetConfig
```
default DetectMetricSetConfigResponse detectMetricSetConfig(Consumer<DetectMetricSetConfigRequest.Builder> detectMetricSetConfigRequest)
                                                     throws ResourceNotFoundException,
                                                            ValidationException,
                                                            InternalServerException,
                                                            AccessDeniedException,
                                                            TooManyRequestsException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            LookoutMetricsException
```
    Detects an Amazon S3 dataset's file format, interval, and offset.
    
    This is a convenience which creates an instance of the DetectMetricSetConfigRequest.Builder avoiding the need to create one manually via DetectMetricSetConfigRequest.builder()
    
    Parameters:
    
    detectMetricSetConfigRequest - A Consumer that will call methods on DetectMetricSetConfigRequest.Builder to create a request.
    
    Returns:
    
    Result of the DetectMetricSetConfig operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getAnomalyGroup
```
default GetAnomalyGroupResponse getAnomalyGroup(GetAnomalyGroupRequest getAnomalyGroupRequest)
                                         throws ResourceNotFoundException,
                                                ValidationException,
                                                InternalServerException,
                                                AccessDeniedException,
                                                TooManyRequestsException,
                                                AwsServiceException,
                                                SdkClientException,
                                                LookoutMetricsException
```
    Returns details about a group of anomalous metrics.
    
    Parameters:
    
    getAnomalyGroupRequest -
    
    Returns:
    
    Result of the GetAnomalyGroup operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getAnomalyGroup
```
default GetAnomalyGroupResponse getAnomalyGroup(Consumer<GetAnomalyGroupRequest.Builder> getAnomalyGroupRequest)
                                         throws ResourceNotFoundException,
                                                ValidationException,
                                                InternalServerException,
                                                AccessDeniedException,
                                                TooManyRequestsException,
                                                AwsServiceException,
                                                SdkClientException,
                                                LookoutMetricsException
```
    Returns details about a group of anomalous metrics.
    
    This is a convenience which creates an instance of the GetAnomalyGroupRequest.Builder avoiding the need to create one manually via GetAnomalyGroupRequest.builder()
    
    Parameters:
    
    getAnomalyGroupRequest - A Consumer that will call methods on GetAnomalyGroupRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetAnomalyGroup operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getDataQualityMetrics
```
default GetDataQualityMetricsResponse getDataQualityMetrics(GetDataQualityMetricsRequest getDataQualityMetricsRequest)
                                                     throws ResourceNotFoundException,
                                                            ValidationException,
                                                            AccessDeniedException,
                                                            TooManyRequestsException,
                                                            InternalServerException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            LookoutMetricsException
```
    Returns details about the requested data quality metrics.
    
    Parameters:
    
    getDataQualityMetricsRequest -
    
    Returns:
    
    Result of the GetDataQualityMetrics operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getDataQualityMetrics
```
default GetDataQualityMetricsResponse getDataQualityMetrics(Consumer<GetDataQualityMetricsRequest.Builder> getDataQualityMetricsRequest)
                                                     throws ResourceNotFoundException,
                                                            ValidationException,
                                                            AccessDeniedException,
                                                            TooManyRequestsException,
                                                            InternalServerException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            LookoutMetricsException
```
    Returns details about the requested data quality metrics.
    
    This is a convenience which creates an instance of the GetDataQualityMetricsRequest.Builder avoiding the need to create one manually via GetDataQualityMetricsRequest.builder()
    
    Parameters:
    
    getDataQualityMetricsRequest - A Consumer that will call methods on GetDataQualityMetricsRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetDataQualityMetrics operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFeedback
```
default GetFeedbackResponse getFeedback(GetFeedbackRequest getFeedbackRequest)
                                 throws ResourceNotFoundException,
                                        ValidationException,
                                        AccessDeniedException,
                                        InternalServerException,
                                        TooManyRequestsException,
                                        AwsServiceException,
                                        SdkClientException,
                                        LookoutMetricsException
```
    Get feedback for an anomaly group.
    
    Parameters:
    
    getFeedbackRequest -
    
    Returns:
    
    Result of the GetFeedback operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFeedback
```
default GetFeedbackResponse getFeedback(Consumer<GetFeedbackRequest.Builder> getFeedbackRequest)
                                 throws ResourceNotFoundException,
                                        ValidationException,
                                        AccessDeniedException,
                                        InternalServerException,
                                        TooManyRequestsException,
                                        AwsServiceException,
                                        SdkClientException,
                                        LookoutMetricsException
```
    Get feedback for an anomaly group.
    
    This is a convenience which creates an instance of the GetFeedbackRequest.Builder avoiding the need to create one manually via GetFeedbackRequest.builder()
    
    Parameters:
    
    getFeedbackRequest - A Consumer that will call methods on GetFeedbackRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetFeedback operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFeedbackPaginator
```
default GetFeedbackIterable getFeedbackPaginator(GetFeedbackRequest getFeedbackRequest)
                                          throws ResourceNotFoundException,
                                                 ValidationException,
                                                 AccessDeniedException,
                                                 InternalServerException,
                                                 TooManyRequestsException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 LookoutMetricsException
```
    Get feedback for an anomaly group.
    
    This is a variant of getFeedback(software.amazon.awssdk.services.lookoutmetrics.model.GetFeedbackRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.GetFeedbackIterable responses = client.getFeedbackPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.GetFeedbackIterable responses = client .getFeedbackPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.GetFeedbackResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.GetFeedbackIterable responses = client.getFeedbackPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the getFeedback(software.amazon.awssdk.services.lookoutmetrics.model.GetFeedbackRequest) operation.
    Parameters:
    
    getFeedbackRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFeedbackPaginator
```
default GetFeedbackIterable getFeedbackPaginator(Consumer<GetFeedbackRequest.Builder> getFeedbackRequest)
                                          throws ResourceNotFoundException,
                                                 ValidationException,
                                                 AccessDeniedException,
                                                 InternalServerException,
                                                 TooManyRequestsException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 LookoutMetricsException
```
    Get feedback for an anomaly group.
    
    This is a variant of getFeedback(software.amazon.awssdk.services.lookoutmetrics.model.GetFeedbackRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.GetFeedbackIterable responses = client.getFeedbackPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.GetFeedbackIterable responses = client .getFeedbackPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.GetFeedbackResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.GetFeedbackIterable responses = client.getFeedbackPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the getFeedback(software.amazon.awssdk.services.lookoutmetrics.model.GetFeedbackRequest) operation.
    
    This is a convenience which creates an instance of the GetFeedbackRequest.Builder avoiding the need to create one manually via GetFeedbackRequest.builder()
    Parameters:
    
    getFeedbackRequest - A Consumer that will call methods on GetFeedbackRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getSampleData
```
default GetSampleDataResponse getSampleData(GetSampleDataRequest getSampleDataRequest)
                                     throws ValidationException,
                                            ResourceNotFoundException,
                                            AccessDeniedException,
                                            TooManyRequestsException,
                                            InternalServerException,
                                            AwsServiceException,
                                            SdkClientException,
                                            LookoutMetricsException
```
    Returns a selection of sample records from an Amazon S3 datasource.
    
    Parameters:
    
    getSampleDataRequest -
    
    Returns:
    
    Result of the GetSampleData operation returned by the service.
    
    Throws:
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getSampleData
```
default GetSampleDataResponse getSampleData(Consumer<GetSampleDataRequest.Builder> getSampleDataRequest)
                                     throws ValidationException,
                                            ResourceNotFoundException,
                                            AccessDeniedException,
                                            TooManyRequestsException,
                                            InternalServerException,
                                            AwsServiceException,
                                            SdkClientException,
                                            LookoutMetricsException
```
    Returns a selection of sample records from an Amazon S3 datasource.
    
    This is a convenience which creates an instance of the GetSampleDataRequest.Builder avoiding the need to create one manually via GetSampleDataRequest.builder()
    
    Parameters:
    
    getSampleDataRequest - A Consumer that will call methods on GetSampleDataRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetSampleData operation returned by the service.
    
    Throws:
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAlerts
```
default ListAlertsResponse listAlerts(ListAlertsRequest listAlertsRequest)
                               throws ResourceNotFoundException,
                                      AccessDeniedException,
                                      InternalServerException,
                                      TooManyRequestsException,
                                      ValidationException,
                                      AwsServiceException,
                                      SdkClientException,
                                      LookoutMetricsException
```
    Lists the alerts attached to a detector.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    Parameters:
    
    listAlertsRequest -
    
    Returns:
    
    Result of the ListAlerts operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAlerts
```
default ListAlertsResponse listAlerts(Consumer<ListAlertsRequest.Builder> listAlertsRequest)
                               throws ResourceNotFoundException,
                                      AccessDeniedException,
                                      InternalServerException,
                                      TooManyRequestsException,
                                      ValidationException,
                                      AwsServiceException,
                                      SdkClientException,
                                      LookoutMetricsException
```
    Lists the alerts attached to a detector.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    This is a convenience which creates an instance of the ListAlertsRequest.Builder avoiding the need to create one manually via ListAlertsRequest.builder()
    
    Parameters:
    
    listAlertsRequest - A Consumer that will call methods on ListAlertsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListAlerts operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAlertsPaginator
```
default ListAlertsIterable listAlertsPaginator(ListAlertsRequest listAlertsRequest)
                                        throws ResourceNotFoundException,
                                               AccessDeniedException,
                                               InternalServerException,
                                               TooManyRequestsException,
                                               ValidationException,
                                               AwsServiceException,
                                               SdkClientException,
                                               LookoutMetricsException
```
    Lists the alerts attached to a detector.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    This is a variant of listAlerts(software.amazon.awssdk.services.lookoutmetrics.model.ListAlertsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAlertsIterable responses = client.listAlertsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.ListAlertsIterable responses = client.listAlertsPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.ListAlertsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAlertsIterable responses = client.listAlertsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAlerts(software.amazon.awssdk.services.lookoutmetrics.model.ListAlertsRequest) operation.
    Parameters:
    
    listAlertsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAlertsPaginator
```
default ListAlertsIterable listAlertsPaginator(Consumer<ListAlertsRequest.Builder> listAlertsRequest)
                                        throws ResourceNotFoundException,
                                               AccessDeniedException,
                                               InternalServerException,
                                               TooManyRequestsException,
                                               ValidationException,
                                               AwsServiceException,
                                               SdkClientException,
                                               LookoutMetricsException
```
    Lists the alerts attached to a detector.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    This is a variant of listAlerts(software.amazon.awssdk.services.lookoutmetrics.model.ListAlertsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAlertsIterable responses = client.listAlertsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.ListAlertsIterable responses = client.listAlertsPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.ListAlertsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAlertsIterable responses = client.listAlertsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAlerts(software.amazon.awssdk.services.lookoutmetrics.model.ListAlertsRequest) operation.
    
    This is a convenience which creates an instance of the ListAlertsRequest.Builder avoiding the need to create one manually via ListAlertsRequest.builder()
    Parameters:
    
    listAlertsRequest - A Consumer that will call methods on ListAlertsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyDetectors
```
default ListAnomalyDetectorsResponse listAnomalyDetectors(ListAnomalyDetectorsRequest listAnomalyDetectorsRequest)
                                                   throws ResourceNotFoundException,
                                                          ValidationException,
                                                          AccessDeniedException,
                                                          TooManyRequestsException,
                                                          InternalServerException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          LookoutMetricsException
```
    Lists the detectors in the current AWS Region.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    Parameters:
    
    listAnomalyDetectorsRequest -
    
    Returns:
    
    Result of the ListAnomalyDetectors operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyDetectors
```
default ListAnomalyDetectorsResponse listAnomalyDetectors(Consumer<ListAnomalyDetectorsRequest.Builder> listAnomalyDetectorsRequest)
                                                   throws ResourceNotFoundException,
                                                          ValidationException,
                                                          AccessDeniedException,
                                                          TooManyRequestsException,
                                                          InternalServerException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          LookoutMetricsException
```
    Lists the detectors in the current AWS Region.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    This is a convenience which creates an instance of the ListAnomalyDetectorsRequest.Builder avoiding the need to create one manually via ListAnomalyDetectorsRequest.builder()
    
    Parameters:
    
    listAnomalyDetectorsRequest - A Consumer that will call methods on ListAnomalyDetectorsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListAnomalyDetectors operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyDetectorsPaginator
```
default ListAnomalyDetectorsIterable listAnomalyDetectorsPaginator(ListAnomalyDetectorsRequest listAnomalyDetectorsRequest)
                                                            throws ResourceNotFoundException,
                                                                   ValidationException,
                                                                   AccessDeniedException,
                                                                   TooManyRequestsException,
                                                                   InternalServerException,
                                                                   AwsServiceException,
                                                                   SdkClientException,
                                                                   LookoutMetricsException
```
    Lists the detectors in the current AWS Region.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    This is a variant of listAnomalyDetectors(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyDetectorsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyDetectorsIterable responses = client.listAnomalyDetectorsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyDetectorsIterable responses = client .listAnomalyDetectorsPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyDetectorsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyDetectorsIterable responses = client.listAnomalyDetectorsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAnomalyDetectors(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyDetectorsRequest) operation.
    Parameters:
    
    listAnomalyDetectorsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyDetectorsPaginator
```
default ListAnomalyDetectorsIterable listAnomalyDetectorsPaginator(Consumer<ListAnomalyDetectorsRequest.Builder> listAnomalyDetectorsRequest)
                                                            throws ResourceNotFoundException,
                                                                   ValidationException,
                                                                   AccessDeniedException,
                                                                   TooManyRequestsException,
                                                                   InternalServerException,
                                                                   AwsServiceException,
                                                                   SdkClientException,
                                                                   LookoutMetricsException
```
    Lists the detectors in the current AWS Region.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    This is a variant of listAnomalyDetectors(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyDetectorsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyDetectorsIterable responses = client.listAnomalyDetectorsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyDetectorsIterable responses = client .listAnomalyDetectorsPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyDetectorsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyDetectorsIterable responses = client.listAnomalyDetectorsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAnomalyDetectors(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyDetectorsRequest) operation.
    
    This is a convenience which creates an instance of the ListAnomalyDetectorsRequest.Builder avoiding the need to create one manually via ListAnomalyDetectorsRequest.builder()
    Parameters:
    
    listAnomalyDetectorsRequest - A Consumer that will call methods on ListAnomalyDetectorsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyGroupRelatedMetrics
```
default ListAnomalyGroupRelatedMetricsResponse listAnomalyGroupRelatedMetrics(ListAnomalyGroupRelatedMetricsRequest listAnomalyGroupRelatedMetricsRequest)
                                                                       throws ResourceNotFoundException,
                                                                              ValidationException,
                                                                              InternalServerException,
                                                                              AccessDeniedException,
                                                                              TooManyRequestsException,
                                                                              AwsServiceException,
                                                                              SdkClientException,
                                                                              LookoutMetricsException
```
    Returns a list of measures that are potential causes or effects of an anomaly group.
    
    Parameters:
    
    listAnomalyGroupRelatedMetricsRequest -
    
    Returns:
    
    Result of the ListAnomalyGroupRelatedMetrics operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyGroupRelatedMetrics
```
default ListAnomalyGroupRelatedMetricsResponse listAnomalyGroupRelatedMetrics(Consumer<ListAnomalyGroupRelatedMetricsRequest.Builder> listAnomalyGroupRelatedMetricsRequest)
                                                                       throws ResourceNotFoundException,
                                                                              ValidationException,
                                                                              InternalServerException,
                                                                              AccessDeniedException,
                                                                              TooManyRequestsException,
                                                                              AwsServiceException,
                                                                              SdkClientException,
                                                                              LookoutMetricsException
```
    Returns a list of measures that are potential causes or effects of an anomaly group.
    
    This is a convenience which creates an instance of the ListAnomalyGroupRelatedMetricsRequest.Builder avoiding the need to create one manually via ListAnomalyGroupRelatedMetricsRequest.builder()
    
    Parameters:
    
    listAnomalyGroupRelatedMetricsRequest - A Consumer that will call methods on ListAnomalyGroupRelatedMetricsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListAnomalyGroupRelatedMetrics operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyGroupRelatedMetricsPaginator
```
default ListAnomalyGroupRelatedMetricsIterable listAnomalyGroupRelatedMetricsPaginator(ListAnomalyGroupRelatedMetricsRequest listAnomalyGroupRelatedMetricsRequest)
                                                                                throws ResourceNotFoundException,
                                                                                       ValidationException,
                                                                                       InternalServerException,
                                                                                       AccessDeniedException,
                                                                                       TooManyRequestsException,
                                                                                       AwsServiceException,
                                                                                       SdkClientException,
                                                                                       LookoutMetricsException
```
    Returns a list of measures that are potential causes or effects of an anomaly group.
    
    This is a variant of listAnomalyGroupRelatedMetrics(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupRelatedMetricsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupRelatedMetricsIterable responses = client.listAnomalyGroupRelatedMetricsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupRelatedMetricsIterable responses = client .listAnomalyGroupRelatedMetricsPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupRelatedMetricsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupRelatedMetricsIterable responses = client.listAnomalyGroupRelatedMetricsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAnomalyGroupRelatedMetrics(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupRelatedMetricsRequest) operation.
    Parameters:
    
    listAnomalyGroupRelatedMetricsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyGroupRelatedMetricsPaginator
```
default ListAnomalyGroupRelatedMetricsIterable listAnomalyGroupRelatedMetricsPaginator(Consumer<ListAnomalyGroupRelatedMetricsRequest.Builder> listAnomalyGroupRelatedMetricsRequest)
                                                                                throws ResourceNotFoundException,
                                                                                       ValidationException,
                                                                                       InternalServerException,
                                                                                       AccessDeniedException,
                                                                                       TooManyRequestsException,
                                                                                       AwsServiceException,
                                                                                       SdkClientException,
                                                                                       LookoutMetricsException
```
    Returns a list of measures that are potential causes or effects of an anomaly group.
    
    This is a variant of listAnomalyGroupRelatedMetrics(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupRelatedMetricsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupRelatedMetricsIterable responses = client.listAnomalyGroupRelatedMetricsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupRelatedMetricsIterable responses = client .listAnomalyGroupRelatedMetricsPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupRelatedMetricsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupRelatedMetricsIterable responses = client.listAnomalyGroupRelatedMetricsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAnomalyGroupRelatedMetrics(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupRelatedMetricsRequest) operation.
    
    This is a convenience which creates an instance of the ListAnomalyGroupRelatedMetricsRequest.Builder avoiding the need to create one manually via ListAnomalyGroupRelatedMetricsRequest.builder()
    Parameters:
    
    listAnomalyGroupRelatedMetricsRequest - A Consumer that will call methods on ListAnomalyGroupRelatedMetricsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyGroupSummaries
```
default ListAnomalyGroupSummariesResponse listAnomalyGroupSummaries(ListAnomalyGroupSummariesRequest listAnomalyGroupSummariesRequest)
                                                             throws ResourceNotFoundException,
                                                                    ValidationException,
                                                                    InternalServerException,
                                                                    AccessDeniedException,
                                                                    TooManyRequestsException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    LookoutMetricsException
```
    Returns a list of anomaly groups.
    
    Parameters:
    
    listAnomalyGroupSummariesRequest -
    
    Returns:
    
    Result of the ListAnomalyGroupSummaries operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyGroupSummaries
```
default ListAnomalyGroupSummariesResponse listAnomalyGroupSummaries(Consumer<ListAnomalyGroupSummariesRequest.Builder> listAnomalyGroupSummariesRequest)
                                                             throws ResourceNotFoundException,
                                                                    ValidationException,
                                                                    InternalServerException,
                                                                    AccessDeniedException,
                                                                    TooManyRequestsException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    LookoutMetricsException
```
    Returns a list of anomaly groups.
    
    This is a convenience which creates an instance of the ListAnomalyGroupSummariesRequest.Builder avoiding the need to create one manually via ListAnomalyGroupSummariesRequest.builder()
    
    Parameters:
    
    listAnomalyGroupSummariesRequest - A Consumer that will call methods on ListAnomalyGroupSummariesRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListAnomalyGroupSummaries operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyGroupSummariesPaginator
```
default ListAnomalyGroupSummariesIterable listAnomalyGroupSummariesPaginator(ListAnomalyGroupSummariesRequest listAnomalyGroupSummariesRequest)
                                                                      throws ResourceNotFoundException,
                                                                             ValidationException,
                                                                             InternalServerException,
                                                                             AccessDeniedException,
                                                                             TooManyRequestsException,
                                                                             AwsServiceException,
                                                                             SdkClientException,
                                                                             LookoutMetricsException
```
    Returns a list of anomaly groups.
    
    This is a variant of listAnomalyGroupSummaries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupSummariesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupSummariesIterable responses = client.listAnomalyGroupSummariesPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupSummariesIterable responses = client .listAnomalyGroupSummariesPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupSummariesResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupSummariesIterable responses = client.listAnomalyGroupSummariesPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAnomalyGroupSummaries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupSummariesRequest) operation.
    Parameters:
    
    listAnomalyGroupSummariesRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyGroupSummariesPaginator
```
default ListAnomalyGroupSummariesIterable listAnomalyGroupSummariesPaginator(Consumer<ListAnomalyGroupSummariesRequest.Builder> listAnomalyGroupSummariesRequest)
                                                                      throws ResourceNotFoundException,
                                                                             ValidationException,
                                                                             InternalServerException,
                                                                             AccessDeniedException,
                                                                             TooManyRequestsException,
                                                                             AwsServiceException,
                                                                             SdkClientException,
                                                                             LookoutMetricsException
```
    Returns a list of anomaly groups.
    
    This is a variant of listAnomalyGroupSummaries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupSummariesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupSummariesIterable responses = client.listAnomalyGroupSummariesPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupSummariesIterable responses = client .listAnomalyGroupSummariesPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupSummariesResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupSummariesIterable responses = client.listAnomalyGroupSummariesPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAnomalyGroupSummaries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupSummariesRequest) operation.
    
    This is a convenience which creates an instance of the ListAnomalyGroupSummariesRequest.Builder avoiding the need to create one manually via ListAnomalyGroupSummariesRequest.builder()
    Parameters:
    
    listAnomalyGroupSummariesRequest - A Consumer that will call methods on ListAnomalyGroupSummariesRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyGroupTimeSeries
```
default ListAnomalyGroupTimeSeriesResponse listAnomalyGroupTimeSeries(ListAnomalyGroupTimeSeriesRequest listAnomalyGroupTimeSeriesRequest)
                                                               throws InternalServerException,
                                                                      AccessDeniedException,
                                                                      ValidationException,
                                                                      ResourceNotFoundException,
                                                                      TooManyRequestsException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      LookoutMetricsException
```
    Gets a list of anomalous metrics for a measure in an anomaly group.
    
    Parameters:
    
    listAnomalyGroupTimeSeriesRequest -
    
    Returns:
    
    Result of the ListAnomalyGroupTimeSeries operation returned by the service.
    
    Throws:
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyGroupTimeSeries
```
default ListAnomalyGroupTimeSeriesResponse listAnomalyGroupTimeSeries(Consumer<ListAnomalyGroupTimeSeriesRequest.Builder> listAnomalyGroupTimeSeriesRequest)
                                                               throws InternalServerException,
                                                                      AccessDeniedException,
                                                                      ValidationException,
                                                                      ResourceNotFoundException,
                                                                      TooManyRequestsException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      LookoutMetricsException
```
    Gets a list of anomalous metrics for a measure in an anomaly group.
    
    This is a convenience which creates an instance of the ListAnomalyGroupTimeSeriesRequest.Builder avoiding the need to create one manually via ListAnomalyGroupTimeSeriesRequest.builder()
    
    Parameters:
    
    listAnomalyGroupTimeSeriesRequest - A Consumer that will call methods on ListAnomalyGroupTimeSeriesRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListAnomalyGroupTimeSeries operation returned by the service.
    
    Throws:
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyGroupTimeSeriesPaginator
```
default ListAnomalyGroupTimeSeriesIterable listAnomalyGroupTimeSeriesPaginator(ListAnomalyGroupTimeSeriesRequest listAnomalyGroupTimeSeriesRequest)
                                                                        throws InternalServerException,
                                                                               AccessDeniedException,
                                                                               ValidationException,
                                                                               ResourceNotFoundException,
                                                                               TooManyRequestsException,
                                                                               AwsServiceException,
                                                                               SdkClientException,
                                                                               LookoutMetricsException
```
    Gets a list of anomalous metrics for a measure in an anomaly group.
    
    This is a variant of listAnomalyGroupTimeSeries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupTimeSeriesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupTimeSeriesIterable responses = client.listAnomalyGroupTimeSeriesPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupTimeSeriesIterable responses = client .listAnomalyGroupTimeSeriesPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupTimeSeriesResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupTimeSeriesIterable responses = client.listAnomalyGroupTimeSeriesPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAnomalyGroupTimeSeries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupTimeSeriesRequest) operation.
    Parameters:
    
    listAnomalyGroupTimeSeriesRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAnomalyGroupTimeSeriesPaginator
```
default ListAnomalyGroupTimeSeriesIterable listAnomalyGroupTimeSeriesPaginator(Consumer<ListAnomalyGroupTimeSeriesRequest.Builder> listAnomalyGroupTimeSeriesRequest)
                                                                        throws InternalServerException,
                                                                               AccessDeniedException,
                                                                               ValidationException,
                                                                               ResourceNotFoundException,
                                                                               TooManyRequestsException,
                                                                               AwsServiceException,
                                                                               SdkClientException,
                                                                               LookoutMetricsException
```
    Gets a list of anomalous metrics for a measure in an anomaly group.
    
    This is a variant of listAnomalyGroupTimeSeries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupTimeSeriesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupTimeSeriesIterable responses = client.listAnomalyGroupTimeSeriesPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupTimeSeriesIterable responses = client .listAnomalyGroupTimeSeriesPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupTimeSeriesResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupTimeSeriesIterable responses = client.listAnomalyGroupTimeSeriesPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAnomalyGroupTimeSeries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupTimeSeriesRequest) operation.
    
    This is a convenience which creates an instance of the ListAnomalyGroupTimeSeriesRequest.Builder avoiding the need to create one manually via ListAnomalyGroupTimeSeriesRequest.builder()
    Parameters:
    
    listAnomalyGroupTimeSeriesRequest - A Consumer that will call methods on ListAnomalyGroupTimeSeriesRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listMetricSets
```
default ListMetricSetsResponse listMetricSets(ListMetricSetsRequest listMetricSetsRequest)
                                       throws ResourceNotFoundException,
                                              ValidationException,
                                              AccessDeniedException,
                                              TooManyRequestsException,
                                              InternalServerException,
                                              AwsServiceException,
                                              SdkClientException,
                                              LookoutMetricsException
```
    Lists the datasets in the current AWS Region.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    Parameters:
    
    listMetricSetsRequest -
    
    Returns:
    
    Result of the ListMetricSets operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listMetricSets
```
default ListMetricSetsResponse listMetricSets(Consumer<ListMetricSetsRequest.Builder> listMetricSetsRequest)
                                       throws ResourceNotFoundException,
                                              ValidationException,
                                              AccessDeniedException,
                                              TooManyRequestsException,
                                              InternalServerException,
                                              AwsServiceException,
                                              SdkClientException,
                                              LookoutMetricsException
```
    Lists the datasets in the current AWS Region.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    This is a convenience which creates an instance of the ListMetricSetsRequest.Builder avoiding the need to create one manually via ListMetricSetsRequest.builder()
    
    Parameters:
    
    listMetricSetsRequest - A Consumer that will call methods on ListMetricSetsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListMetricSets operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listMetricSetsPaginator
```
default ListMetricSetsIterable listMetricSetsPaginator(ListMetricSetsRequest listMetricSetsRequest)
                                                throws ResourceNotFoundException,
                                                       ValidationException,
                                                       AccessDeniedException,
                                                       TooManyRequestsException,
                                                       InternalServerException,
                                                       AwsServiceException,
                                                       SdkClientException,
                                                       LookoutMetricsException
```
    Lists the datasets in the current AWS Region.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    This is a variant of listMetricSets(software.amazon.awssdk.services.lookoutmetrics.model.ListMetricSetsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListMetricSetsIterable responses = client.listMetricSetsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.ListMetricSetsIterable responses = client .listMetricSetsPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.ListMetricSetsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListMetricSetsIterable responses = client.listMetricSetsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listMetricSets(software.amazon.awssdk.services.lookoutmetrics.model.ListMetricSetsRequest) operation.
    Parameters:
    
    listMetricSetsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listMetricSetsPaginator
```
default ListMetricSetsIterable listMetricSetsPaginator(Consumer<ListMetricSetsRequest.Builder> listMetricSetsRequest)
                                                throws ResourceNotFoundException,
                                                       ValidationException,
                                                       AccessDeniedException,
                                                       TooManyRequestsException,
                                                       InternalServerException,
                                                       AwsServiceException,
                                                       SdkClientException,
                                                       LookoutMetricsException
```
    Lists the datasets in the current AWS Region.
    
    Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.
    
    This is a variant of listMetricSets(software.amazon.awssdk.services.lookoutmetrics.model.ListMetricSetsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListMetricSetsIterable responses = client.listMetricSetsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.lookoutmetrics.paginators.ListMetricSetsIterable responses = client .listMetricSetsPaginator(request); for (software.amazon.awssdk.services.lookoutmetrics.model.ListMetricSetsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.lookoutmetrics.paginators.ListMetricSetsIterable responses = client.listMetricSetsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listMetricSets(software.amazon.awssdk.services.lookoutmetrics.model.ListMetricSetsRequest) operation.
    
    This is a convenience which creates an instance of the ListMetricSetsRequest.Builder avoiding the need to create one manually via ListMetricSetsRequest.builder()
    Parameters:
    
    listMetricSetsRequest - A Consumer that will call methods on ListMetricSetsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
                                                 throws InternalServerException,
                                                        ValidationException,
                                                        ResourceNotFoundException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        LookoutMetricsException
```
    Gets a list of tags for a detector, dataset, or alert.
    
    Parameters:
    
    listTagsForResourceRequest -
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
default ListTagsForResourceResponse listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
                                                 throws InternalServerException,
                                                        ValidationException,
                                                        ResourceNotFoundException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        LookoutMetricsException
```
    Gets a list of tags for a detector, dataset, or alert.
    
    This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()
    
    Parameters:
    
    listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - putFeedback
```
default PutFeedbackResponse putFeedback(PutFeedbackRequest putFeedbackRequest)
                                 throws ResourceNotFoundException,
                                        ValidationException,
                                        AccessDeniedException,
                                        InternalServerException,
                                        TooManyRequestsException,
                                        AwsServiceException,
                                        SdkClientException,
                                        LookoutMetricsException
```
    Add feedback for an anomalous metric.
    
    Parameters:
    
    putFeedbackRequest -
    
    Returns:
    
    Result of the PutFeedback operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - putFeedback
```
default PutFeedbackResponse putFeedback(Consumer<PutFeedbackRequest.Builder> putFeedbackRequest)
                                 throws ResourceNotFoundException,
                                        ValidationException,
                                        AccessDeniedException,
                                        InternalServerException,
                                        TooManyRequestsException,
                                        AwsServiceException,
                                        SdkClientException,
                                        LookoutMetricsException
```
    Add feedback for an anomalous metric.
    
    This is a convenience which creates an instance of the PutFeedbackRequest.Builder avoiding the need to create one manually via PutFeedbackRequest.builder()
    
    Parameters:
    
    putFeedbackRequest - A Consumer that will call methods on PutFeedbackRequest.Builder to create a request.
    
    Returns:
    
    Result of the PutFeedback operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest)
                                 throws InternalServerException,
                                        ValidationException,
                                        ResourceNotFoundException,
                                        AwsServiceException,
                                        SdkClientException,
                                        LookoutMetricsException
```
    Adds tags to a detector, dataset, or alert.
    
    Parameters:
    
    tagResourceRequest -
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
                                 throws InternalServerException,
                                        ValidationException,
                                        ResourceNotFoundException,
                                        AwsServiceException,
                                        SdkClientException,
                                        LookoutMetricsException
```
    Adds tags to a detector, dataset, or alert.
    
    This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()
    
    Parameters:
    
    tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest)
                                     throws InternalServerException,
                                            ValidationException,
                                            ResourceNotFoundException,
                                            AwsServiceException,
                                            SdkClientException,
                                            LookoutMetricsException
```
    Removes tags from a detector, dataset, or alert.
    
    Parameters:
    
    untagResourceRequest -
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
                                     throws InternalServerException,
                                            ValidationException,
                                            ResourceNotFoundException,
                                            AwsServiceException,
                                            SdkClientException,
                                            LookoutMetricsException
```
    Removes tags from a detector, dataset, or alert.
    
    This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()
    
    Parameters:
    
    untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateAlert
```
default UpdateAlertResponse updateAlert(UpdateAlertRequest updateAlertRequest)
                                 throws ValidationException,
                                        ResourceNotFoundException,
                                        InternalServerException,
                                        AccessDeniedException,
                                        TooManyRequestsException,
                                        AwsServiceException,
                                        SdkClientException,
                                        LookoutMetricsException
```
    Make changes to an existing alert.
    
    Parameters:
    
    updateAlertRequest -
    
    Returns:
    
    Result of the UpdateAlert operation returned by the service.
    
    Throws:
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateAlert
```
default UpdateAlertResponse updateAlert(Consumer<UpdateAlertRequest.Builder> updateAlertRequest)
                                 throws ValidationException,
                                        ResourceNotFoundException,
                                        InternalServerException,
                                        AccessDeniedException,
                                        TooManyRequestsException,
                                        AwsServiceException,
                                        SdkClientException,
                                        LookoutMetricsException
```
    Make changes to an existing alert.
    
    This is a convenience which creates an instance of the UpdateAlertRequest.Builder avoiding the need to create one manually via UpdateAlertRequest.builder()
    
    Parameters:
    
    updateAlertRequest - A Consumer that will call methods on UpdateAlertRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateAlert operation returned by the service.
    
    Throws:
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateAnomalyDetector
```
default UpdateAnomalyDetectorResponse updateAnomalyDetector(UpdateAnomalyDetectorRequest updateAnomalyDetectorRequest)
                                                     throws ResourceNotFoundException,
                                                            ValidationException,
                                                            InternalServerException,
                                                            AccessDeniedException,
                                                            TooManyRequestsException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            LookoutMetricsException
```
    Updates a detector. After activation, you can only change a detector's ingestion delay and description.
    
    Parameters:
    
    updateAnomalyDetectorRequest -
    
    Returns:
    
    Result of the UpdateAnomalyDetector operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateAnomalyDetector
```
default UpdateAnomalyDetectorResponse updateAnomalyDetector(Consumer<UpdateAnomalyDetectorRequest.Builder> updateAnomalyDetectorRequest)
                                                     throws ResourceNotFoundException,
                                                            ValidationException,
                                                            InternalServerException,
                                                            AccessDeniedException,
                                                            TooManyRequestsException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            LookoutMetricsException
```
    Updates a detector. After activation, you can only change a detector's ingestion delay and description.
    
    This is a convenience which creates an instance of the UpdateAnomalyDetectorRequest.Builder avoiding the need to create one manually via UpdateAnomalyDetectorRequest.builder()
    
    Parameters:
    
    updateAnomalyDetectorRequest - A Consumer that will call methods on UpdateAnomalyDetectorRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateAnomalyDetector operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateMetricSet
```
default UpdateMetricSetResponse updateMetricSet(UpdateMetricSetRequest updateMetricSetRequest)
                                         throws ResourceNotFoundException,
                                                ValidationException,
                                                InternalServerException,
                                                AccessDeniedException,
                                                TooManyRequestsException,
                                                ServiceQuotaExceededException,
                                                AwsServiceException,
                                                SdkClientException,
                                                LookoutMetricsException
```
    Updates a dataset.
    
    Parameters:
    
    updateMetricSetRequest -
    
    Returns:
    
    Result of the UpdateMetricSet operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    ServiceQuotaExceededException - The request exceeded the service's quotas. Check the service quotas and try again.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateMetricSet
```
default UpdateMetricSetResponse updateMetricSet(Consumer<UpdateMetricSetRequest.Builder> updateMetricSetRequest)
                                         throws ResourceNotFoundException,
                                                ValidationException,
                                                InternalServerException,
                                                AccessDeniedException,
                                                TooManyRequestsException,
                                                ServiceQuotaExceededException,
                                                AwsServiceException,
                                                SdkClientException,
                                                LookoutMetricsException
```
    Updates a dataset.
    
    This is a convenience which creates an instance of the UpdateMetricSetRequest.Builder avoiding the need to create one manually via UpdateMetricSetRequest.builder()
    
    Parameters:
    
    updateMetricSetRequest - A Consumer that will call methods on UpdateMetricSetRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateMetricSet operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The specified resource cannot be found. Check the ARN of the resource and try again.
    
    ValidationException - The input fails to satisfy the constraints specified by the AWS service. Check your input values and try again.
    
    InternalServerException - The request processing has failed because of an unknown error, exception, or failure.
    
    AccessDeniedException - You do not have sufficient permissions to perform this action.
    
    TooManyRequestsException - The request was denied due to too many requests being submitted at the same time.
    
    ServiceQuotaExceededException - The request exceeded the service's quotas. Check the service quotas and try again.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    LookoutMetricsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - create
```
static LookoutMetricsClient create()
```
    Create a LookoutMetricsClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
  - builder
```
static LookoutMetricsClientBuilder builder()
```
    Create a builder that can be used to configure and create a LookoutMetricsClient.
  - serviceMetadata
```
static ServiceMetadata serviceMetadata()
```
  - serviceClientConfiguration
```
default LookoutMetricsServiceClientConfiguration serviceClientConfiguration()
```
    Specified by:
    
    serviceClientConfiguration in interface AwsClient
    
    Specified by:
    
    serviceClientConfiguration in interface SdkClient

Modifier and Type	Field	Description
`static String`	`SERVICE_METADATA_ID`	Value for looking up the service's metadata from the `ServiceMetadataProvider`.
`static String`	`SERVICE_NAME`

Interface LookoutMetricsClient

Field Summary

Method Summary

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

Methods inherited from interface software.amazon.awssdk.core.SdkClient

Field Detail

SERVICE_NAME

SERVICE_METADATA_ID

Method Detail

activateAnomalyDetector

activateAnomalyDetector

backTestAnomalyDetector

backTestAnomalyDetector

createAlert

createAlert

createAnomalyDetector

createAnomalyDetector

createMetricSet

createMetricSet

deactivateAnomalyDetector

deactivateAnomalyDetector

deleteAlert

deleteAlert

deleteAnomalyDetector

deleteAnomalyDetector

describeAlert

describeAlert

describeAnomalyDetectionExecutions

describeAnomalyDetectionExecutions

describeAnomalyDetectionExecutionsPaginator

describeAnomalyDetectionExecutionsPaginator

describeAnomalyDetector

describeAnomalyDetector

describeMetricSet

describeMetricSet

detectMetricSetConfig

detectMetricSetConfig

getAnomalyGroup

getAnomalyGroup

getDataQualityMetrics

getDataQualityMetrics

getFeedback

getFeedback

getFeedbackPaginator

getFeedbackPaginator

getSampleData

getSampleData

listAlerts

listAlerts

listAlertsPaginator

listAlertsPaginator

listAnomalyDetectors

listAnomalyDetectors

listAnomalyDetectorsPaginator

listAnomalyDetectorsPaginator

listAnomalyGroupRelatedMetrics

listAnomalyGroupRelatedMetrics

listAnomalyGroupRelatedMetricsPaginator

listAnomalyGroupRelatedMetricsPaginator

listAnomalyGroupSummaries

listAnomalyGroupSummaries

listAnomalyGroupSummariesPaginator

listAnomalyGroupSummariesPaginator

listAnomalyGroupTimeSeries

listAnomalyGroupTimeSeries

listAnomalyGroupTimeSeriesPaginator

listAnomalyGroupTimeSeriesPaginator

listMetricSets

listMetricSets

listMetricSetsPaginator

listMetricSetsPaginator

listTagsForResource

listTagsForResource

putFeedback

putFeedback

tagResource

tagResource

untagResource

untagResource

updateAlert