java.lang.Object

com.amazon.sqs.javamessaging.AmazonSQSExtendedClient

All Implemented Interfaces:: com.amazonaws.services.sqs.AmazonSQS

public class AmazonSQSExtendedClient extends Object implements com.amazonaws.services.sqs.AmazonSQS

Amazon SQS Extended Client extends the functionality of Amazon SQS client. All service calls made using this client are blocking, and will not return until the service call completes.

The Amazon SQS extended client enables sending and receiving large messages via Amazon S3. You can use this library to:

Specify whether messages are always stored in Amazon S3 or only when a message size exceeds 256 KB.
Send a message that references a single message object stored in an Amazon S3 bucket.
Get the corresponding message object from an Amazon S3 bucket.
Delete the corresponding message object from an Amazon S3 bucket.

Field Summary

Fields inherited from interface com.amazonaws.services.sqs.AmazonSQS
ENDPOINT_PREFIX
Constructor Summary

Constructors

Constructor

Description

AmazonSQSExtendedClient(com.amazonaws.services.sqs.AmazonSQS sqsClient)

Constructs a new Amazon SQS extended client to invoke service methods on Amazon SQS with extended functionality using the specified Amazon SQS client object.

AmazonSQSExtendedClient(com.amazonaws.services.sqs.AmazonSQS sqsClient, ExtendedClientConfiguration extendedClientConfig)

Constructs a new Amazon SQS extended client to invoke service methods on Amazon SQS with extended functionality using the specified Amazon SQS client object.
Method Summary

Modifier and Type

Method

Description

com.amazonaws.services.sqs.model.AddPermissionResult

addPermission(com.amazonaws.services.sqs.model.AddPermissionRequest addPermissionRequest)

Adds a permission to a queue for a specific principal .

com.amazonaws.services.sqs.model.AddPermissionResult

addPermission(String queueUrl, String label, List<String> aWSAccountIds, List<String> actions)

Adds a permission to a queue for a specific principal .

com.amazonaws.services.sqs.model.CancelMessageMoveTaskResult

cancelMessageMoveTask(com.amazonaws.services.sqs.model.CancelMessageMoveTaskRequest cancelMessageMoveTaskRequest)

com.amazonaws.services.sqs.model.ChangeMessageVisibilityResult

changeMessageVisibility(com.amazonaws.services.sqs.model.ChangeMessageVisibilityRequest changeMessageVisibilityRequest)

Changes the visibility timeout of a specified message in a queue to a new value.

com.amazonaws.services.sqs.model.ChangeMessageVisibilityResult

changeMessageVisibility(String queueUrl, String receiptHandle, Integer visibilityTimeout)

Simplified method form for invoking the ChangeMessageVisibility operation.

com.amazonaws.services.sqs.model.ChangeMessageVisibilityBatchResult

changeMessageVisibilityBatch(com.amazonaws.services.sqs.model.ChangeMessageVisibilityBatchRequest changeMessageVisibilityBatchRequest)

Changes the visibility timeout of multiple messages.

com.amazonaws.services.sqs.model.ChangeMessageVisibilityBatchResult

changeMessageVisibilityBatch(String queueUrl, List<com.amazonaws.services.sqs.model.ChangeMessageVisibilityBatchRequestEntry> entries)

Simplified method form for invoking the ChangeMessageVisibilityBatch operation.

com.amazonaws.services.sqs.model.CreateQueueResult

createQueue(com.amazonaws.services.sqs.model.CreateQueueRequest createQueueRequest)

Creates a new queue, or returns the URL of an existing one.

com.amazonaws.services.sqs.model.CreateQueueResult

createQueue(String queueName)

Creates a new queue, or returns the URL of an existing one.

com.amazonaws.services.sqs.model.DeleteMessageResult

deleteMessage(com.amazonaws.services.sqs.model.DeleteMessageRequest deleteMessageRequest)

Deletes the specified message from the specified queue and deletes the message payload from Amazon S3 when necessary.

com.amazonaws.services.sqs.model.DeleteMessageResult

deleteMessage(String queueUrl, String receiptHandle)

Deletes the specified message from the specified queue and deletes the message payload from Amazon S3 when necessary.

com.amazonaws.services.sqs.model.DeleteMessageBatchResult

deleteMessageBatch(com.amazonaws.services.sqs.model.DeleteMessageBatchRequest deleteMessageBatchRequest)

Deletes up to ten messages from the specified queue.

com.amazonaws.services.sqs.model.DeleteMessageBatchResult

deleteMessageBatch(String queueUrl, List<com.amazonaws.services.sqs.model.DeleteMessageBatchRequestEntry> entries)

Deletes up to ten messages from the specified queue.

com.amazonaws.services.sqs.model.DeleteQueueResult

deleteQueue(com.amazonaws.services.sqs.model.DeleteQueueRequest deleteQueueRequest)

Deletes the queue specified by the queue URL , regardless of whether the queue is empty.

com.amazonaws.services.sqs.model.DeleteQueueResult

deleteQueue(String queueUrl)

Deletes the queue specified by the queue URL , regardless of whether the queue is empty.

com.amazonaws.ResponseMetadata

getCachedResponseMetadata(com.amazonaws.AmazonWebServiceRequest request)

Returns additional metadata for a previously executed successful, request, typically used for debugging issues where a service isn't acting as expected.

com.amazonaws.services.sqs.model.GetQueueAttributesResult

getQueueAttributes(com.amazonaws.services.sqs.model.GetQueueAttributesRequest getQueueAttributesRequest)

Gets attributes for the specified queue.

com.amazonaws.services.sqs.model.GetQueueAttributesResult

getQueueAttributes(String queueUrl, List<String> attributeNames)

Gets attributes for the specified queue.

com.amazonaws.services.sqs.model.GetQueueUrlResult

getQueueUrl(com.amazonaws.services.sqs.model.GetQueueUrlRequest getQueueUrlRequest)

Returns the URL of an existing queue.

com.amazonaws.services.sqs.model.GetQueueUrlResult

getQueueUrl(String queueName)

Returns the URL of an existing queue.

com.amazonaws.services.sqs.model.ListDeadLetterSourceQueuesResult

listDeadLetterSourceQueues(com.amazonaws.services.sqs.model.ListDeadLetterSourceQueuesRequest listDeadLetterSourceQueuesRequest)

Returns a list of your queues that have the RedrivePolicy queue attribute configured with a dead letter queue.

com.amazonaws.services.sqs.model.ListMessageMoveTasksResult

listMessageMoveTasks(com.amazonaws.services.sqs.model.ListMessageMoveTasksRequest listMessageMoveTasksRequest)

com.amazonaws.services.sqs.model.ListQueuesResult

listQueues()

Returns a list of your queues.

com.amazonaws.services.sqs.model.ListQueuesResult

listQueues(com.amazonaws.services.sqs.model.ListQueuesRequest listQueuesRequest)

Returns a list of your queues.

com.amazonaws.services.sqs.model.ListQueuesResult

listQueues(String queueNamePrefix)

Returns a list of your queues.

com.amazonaws.services.sqs.model.ListQueueTagsResult

listQueueTags(com.amazonaws.services.sqs.model.ListQueueTagsRequest listQueueTagsRequest)

com.amazonaws.services.sqs.model.ListQueueTagsResult

listQueueTags(String queueUrl)

com.amazonaws.services.sqs.model.PurgeQueueResult

purgeQueue(com.amazonaws.services.sqs.model.PurgeQueueRequest purgeQueueRequest)

Deletes the messages in a queue specified by the queue URL .

com.amazonaws.services.sqs.model.ReceiveMessageResult

receiveMessage(com.amazonaws.services.sqs.model.ReceiveMessageRequest receiveMessageRequest)

Retrieves one or more messages, with a maximum limit of 10 messages, from the specified queue.

com.amazonaws.services.sqs.model.ReceiveMessageResult

receiveMessage(String queueUrl)

Retrieves one or more messages, with a maximum limit of 10 messages, from the specified queue.

com.amazonaws.services.sqs.model.RemovePermissionResult

removePermission(com.amazonaws.services.sqs.model.RemovePermissionRequest removePermissionRequest)

Revokes any permissions in the queue policy that matches the specified Label parameter.

com.amazonaws.services.sqs.model.RemovePermissionResult

removePermission(String queueUrl, String label)

Revokes any permissions in the queue policy that matches the specified Label parameter.

com.amazonaws.services.sqs.model.SendMessageResult

sendMessage(com.amazonaws.services.sqs.model.SendMessageRequest sendMessageRequest)

Delivers a message to the specified queue and uploads the message payload to Amazon S3 if necessary.

com.amazonaws.services.sqs.model.SendMessageResult

sendMessage(String queueUrl, String messageBody)

Delivers a message to the specified queue and uploads the message payload to Amazon S3 if necessary.

com.amazonaws.services.sqs.model.SendMessageBatchResult

sendMessageBatch(com.amazonaws.services.sqs.model.SendMessageBatchRequest sendMessageBatchRequest)

Delivers up to ten messages to the specified queue.

com.amazonaws.services.sqs.model.SendMessageBatchResult

sendMessageBatch(String queueUrl, List<com.amazonaws.services.sqs.model.SendMessageBatchRequestEntry> entries)

Delivers up to ten messages to the specified queue.

void

setEndpoint(String endpoint)

Overrides the default endpoint for this client ("sqs.us-east-1.amazonaws.com").

com.amazonaws.services.sqs.model.SetQueueAttributesResult

setQueueAttributes(com.amazonaws.services.sqs.model.SetQueueAttributesRequest setQueueAttributesRequest)

Sets the value of one or more queue attributes.

com.amazonaws.services.sqs.model.SetQueueAttributesResult

setQueueAttributes(String queueUrl, Map<String,String> attributes)

Sets the value of one or more queue attributes.

void

setRegion(com.amazonaws.regions.Region region)

An alternative to AmazonSQS.setEndpoint(String), sets the regional endpoint for this client's service calls.

void

shutdown()

Shuts down this client object, releasing any resources that might be held open.

com.amazonaws.services.sqs.model.StartMessageMoveTaskResult

startMessageMoveTask(com.amazonaws.services.sqs.model.StartMessageMoveTaskRequest startMessageMoveTaskRequest)

com.amazonaws.services.sqs.model.TagQueueResult

tagQueue(com.amazonaws.services.sqs.model.TagQueueRequest tagQueueRequest)

com.amazonaws.services.sqs.model.TagQueueResult

tagQueue(String queueUrl, Map<String,String> tags)

com.amazonaws.services.sqs.model.UntagQueueResult

untagQueue(com.amazonaws.services.sqs.model.UntagQueueRequest untagQueueRequest)

com.amazonaws.services.sqs.model.UntagQueueResult

untagQueue(String queueUrl, List<String> tagKeys)

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface com.amazonaws.services.sqs.AmazonSQS
addPermission, addPermission, cancelMessageMoveTask, createQueue, createQueue, deleteQueue, deleteQueue, getCachedResponseMetadata, getQueueAttributes, getQueueAttributes, getQueueUrl, getQueueUrl, listDeadLetterSourceQueues, listMessageMoveTasks, listQueues, listQueues, listQueues, listQueueTags, listQueueTags, removePermission, removePermission, setEndpoint, setQueueAttributes, setQueueAttributes, setRegion, shutdown, startMessageMoveTask, tagQueue, tagQueue, untagQueue, untagQueue

Constructor Details
- AmazonSQSExtendedClient
  
  public AmazonSQSExtendedClient(com.amazonaws.services.sqs.AmazonSQS sqsClient)
  
  Constructs a new Amazon SQS extended client to invoke service methods on Amazon SQS with extended functionality using the specified Amazon SQS client object.
  All service calls made using this new client object are blocking, and will not return until the service call completes.
  
  Parameters:
  
  sqsClient - The Amazon SQS client to use to connect to Amazon SQS.
- AmazonSQSExtendedClient
  
  public AmazonSQSExtendedClient(com.amazonaws.services.sqs.AmazonSQS sqsClient, ExtendedClientConfiguration extendedClientConfig)
  
  Constructs a new Amazon SQS extended client to invoke service methods on Amazon SQS with extended functionality using the specified Amazon SQS client object.
  All service calls made using this new client object are blocking, and will not return until the service call completes.
  
  Parameters:
  
  sqsClient - The Amazon SQS client to use to connect to Amazon SQS.
  
  extendedClientConfig - The extended client configuration options controlling the functionality of this client.
Method Details
- sendMessage
  
  public com.amazonaws.services.sqs.model.SendMessageResult sendMessage(com.amazonaws.services.sqs.model.SendMessageRequest sendMessageRequest)
  
  Delivers a message to the specified queue and uploads the message payload to Amazon S3 if necessary.
  
  IMPORTANT: The following list shows the characters (in Unicode) allowed in your message, according to the W3C XML specification. For more information, go to http://www.w3.org/TR/REC-xml/#charsets If you send any characters not included in the list, your request will be rejected. #x9 | #xA | #xD | [#x20 to #xD7FF] | [#xE000 to #xFFFD] | [#x10000 to #x10FFFF]
  IMPORTANT: The input object may be modified by the method.
  
  Specified by:
  
  sendMessage in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  sendMessageRequest - Container for the necessary parameters to execute the SendMessage service method on AmazonSQS.
  
  Returns:
  
  The response from the SendMessage service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.InvalidMessageContentsException
  
  UnsupportedOperationException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- sendMessage
  
  public com.amazonaws.services.sqs.model.SendMessageResult sendMessage(String queueUrl, String messageBody)
  
  Delivers a message to the specified queue and uploads the message payload to Amazon S3 if necessary.
  
  IMPORTANT: The following list shows the characters (in Unicode) allowed in your message, according to the W3C XML specification. For more information, go to http://www.w3.org/TR/REC-xml/#charsets If you send any characters not included in the list, your request will be rejected. #x9 | #xA | #xD | [#x20 to #xD7FF] | [#xE000 to #xFFFD] | [#x10000 to #x10FFFF]
  
  Specified by:
  
  sendMessage in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueUrl - The URL of the Amazon SQS queue to take action on.
  
  messageBody - The message to send. For a list of allowed characters, see the preceding important note.
  
  Returns:
  
  The response from the SendMessage service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.InvalidMessageContentsException
  
  UnsupportedOperationException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- receiveMessage
  
  public com.amazonaws.services.sqs.model.ReceiveMessageResult receiveMessage(com.amazonaws.services.sqs.model.ReceiveMessageRequest receiveMessageRequest)
  Retrieves one or more messages, with a maximum limit of 10 messages, from the specified queue. Downloads the message payloads from Amazon S3 when necessary. Long poll support is enabled by using the WaitTimeSeconds parameter. For more information, see Amazon SQS Long Poll in the Amazon SQS Developer Guide .
  
  Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. This means only the messages on the sampled machines are returned. If the number of messages in the queue is small (less than 1000), it is likely you will get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response; in which case you should repeat the request.
  
  For each message returned, the response includes the following:
  
  Message body
  
  MD5 digest of the message body. For information about MD5, go to http://www.faqs.org/rfcs/rfc1321.html .
  
  Message ID you received when you sent the message to the queue.
  
  Receipt handle.
  
  Message attributes.
  
  MD5 digest of the message attributes.
  
  The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide .
  
  You can provide the VisibilityTimeout parameter in your request, which will be applied to the messages that Amazon SQS returns in the response. If you do not include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon SQS Developer Guide .
  
  NOTE: Going forward, new attributes might be added. If you are writing code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
  Specified by:
  
  receiveMessage in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  receiveMessageRequest - Container for the necessary parameters to execute the ReceiveMessage service method on AmazonSQS.
  
  Returns:
  
  The response from the ReceiveMessage service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.OverLimitException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- receiveMessage
  
  public com.amazonaws.services.sqs.model.ReceiveMessageResult receiveMessage(String queueUrl)
  Retrieves one or more messages, with a maximum limit of 10 messages, from the specified queue. Downloads the message payloads from Amazon S3 when necessary. Long poll support is enabled by using the WaitTimeSeconds parameter. For more information, see Amazon SQS Long Poll in the Amazon SQS Developer Guide .
  
  Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. This means only the messages on the sampled machines are returned. If the number of messages in the queue is small (less than 1000), it is likely you will get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response; in which case you should repeat the request.
  
  For each message returned, the response includes the following:
  
  Message body
  
  MD5 digest of the message body. For information about MD5, go to http://www.faqs.org/rfcs/rfc1321.html .
  
  Message ID you received when you sent the message to the queue.
  
  Receipt handle.
  
  Message attributes.
  
  MD5 digest of the message attributes.
  
  The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide .
  
  You can provide the VisibilityTimeout parameter in your request, which will be applied to the messages that Amazon SQS returns in the response. If you do not include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon SQS Developer Guide .
  
  NOTE: Going forward, new attributes might be added. If you are writing code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
  Specified by:
  
  receiveMessage in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueUrl - The URL of the Amazon SQS queue to take action on.
  
  Returns:
  
  The response from the ReceiveMessage service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.OverLimitException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- deleteMessage
  
  public com.amazonaws.services.sqs.model.DeleteMessageResult deleteMessage(com.amazonaws.services.sqs.model.DeleteMessageRequest deleteMessageRequest)
  
  Deletes the specified message from the specified queue and deletes the message payload from Amazon S3 when necessary. You specify the message by using the message's receipt handle and not the message ID you received when you sent the message. Even if the message is locked by another reader due to the visibility timeout setting, it is still deleted from the queue. If you leave a message in the queue for longer than the queue's configured retention period, Amazon SQS automatically deletes it.
  
  NOTE: The receipt handle is associated with a specific instance of receiving the message. If you receive a message more than once, the receipt handle you get each time you receive the message is different. When you request DeleteMessage, if you don't provide the most recently received receipt handle for the message, the request will still succeed, but the message might not be deleted.
  
  IMPORTANT: It is possible you will receive a message even after you have deleted it. This might happen on rare occasions if one of the servers storing a copy of the message is unavailable when you request to delete the message. The copy remains on the server and might be returned to you again on a subsequent receive request. You should create your system to be idempotent so that receiving a particular message more than once is not a problem.
  
  Specified by:
  
  deleteMessage in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  deleteMessageRequest - Container for the necessary parameters to execute the DeleteMessage service method on AmazonSQS.
  
  Returns:
  
  The response from the DeleteMessage service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.ReceiptHandleIsInvalidException
  
  com.amazonaws.services.sqs.model.InvalidIdFormatException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- deleteMessage
  
  public com.amazonaws.services.sqs.model.DeleteMessageResult deleteMessage(String queueUrl, String receiptHandle)
  
  Deletes the specified message from the specified queue and deletes the message payload from Amazon S3 when necessary. You specify the message by using the message's receipt handle and not the message ID you received when you sent the message. Even if the message is locked by another reader due to the visibility timeout setting, it is still deleted from the queue. If you leave a message in the queue for longer than the queue's configured retention period, Amazon SQS automatically deletes it.
  
  NOTE: The receipt handle is associated with a specific instance of receiving the message. If you receive a message more than once, the receipt handle you get each time you receive the message is different. When you request DeleteMessage, if you don't provide the most recently received receipt handle for the message, the request will still succeed, but the message might not be deleted.
  
  IMPORTANT: It is possible you will receive a message even after you have deleted it. This might happen on rare occasions if one of the servers storing a copy of the message is unavailable when you request to delete the message. The copy remains on the server and might be returned to you again on a subsequent receive request. You should create your system to be idempotent so that receiving a particular message more than once is not a problem.
  
  Specified by:
  
  deleteMessage in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueUrl - The URL of the Amazon SQS queue to take action on.
  
  receiptHandle - The receipt handle associated with the message to delete.
  
  Returns:
  
  The response from the DeleteMessage service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.ReceiptHandleIsInvalidException
  
  com.amazonaws.services.sqs.model.InvalidIdFormatException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- changeMessageVisibility
  
  public com.amazonaws.services.sqs.model.ChangeMessageVisibilityResult changeMessageVisibility(String queueUrl, String receiptHandle, Integer visibilityTimeout)
  
  Simplified method form for invoking the ChangeMessageVisibility operation.
  Specified by:
  
  changeMessageVisibility in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueUrl - The URL of the Amazon SQS queue to take action on.
  
  receiptHandle - The receipt handle associated with the message whose visibility timeout should be changed. This parameter is returned by the ReceiveMessage action.
  
  visibilityTimeout - The new value (in seconds - from 0 to 43200 - maximum 12 hours) for the message's visibility timeout.
  
  Returns:
  
  The response from the ChangeMessageVisibility service method, as returned by AmazonSQS.
  
  See Also:
  
  changeMessageVisibility(ChangeMessageVisibilityRequest)
- changeMessageVisibility
  
  public com.amazonaws.services.sqs.model.ChangeMessageVisibilityResult changeMessageVisibility(com.amazonaws.services.sqs.model.ChangeMessageVisibilityRequest changeMessageVisibilityRequest) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Changes the visibility timeout of a specified message in a queue to a new value. The maximum allowed timeout value you can set the value to is 12 hours. This means you can't extend the timeout of a message in an existing queue to more than a total visibility timeout of 12 hours. (For more information visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide .)
  
  For example, let's say you have a message and its default message visibility timeout is 30 minutes. You could call ChangeMessageVisiblity with a value of two hours and the effective timeout would be two hours and 30 minutes. When that time comes near you could again extend the time out by calling ChangeMessageVisiblity, but this time the maximum allowed timeout would be 9 hours and 30 minutes.
  
  NOTE: There is a 120,000 limit for the number of inflight messages per queue. Messages are inflight after they have been received from the queue by a consuming component, but have not yet been deleted from the queue. If you reach the 120,000 limit, you will receive an OverLimit error message from Amazon SQS. To help avoid reaching the limit, you should delete the messages from the queue after they have been processed. You can also increase the number of queues you use to process the messages.
  
  IMPORTANT:If you attempt to set the VisibilityTimeout to an amount more than the maximum time left, Amazon SQS returns an error. It will not automatically recalculate and increase the timeout to the maximum time remaining.
  
  IMPORTANT:Unlike with a queue, when you change the visibility timeout for a specific message, that timeout value is applied immediately but is not saved in memory for that message. If you don't delete a message after it is received, the visibility timeout for the message the next time it is received reverts to the original timeout value, not the value you set with the ChangeMessageVisibility action.
  
  Specified by:
  
  changeMessageVisibility in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  changeMessageVisibilityRequest - Container for the necessary parameters to execute the ChangeMessageVisibility service method on AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.ReceiptHandleIsInvalidException
  
  com.amazonaws.services.sqs.model.MessageNotInflightException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- sendMessageBatch
  
  public com.amazonaws.services.sqs.model.SendMessageBatchResult sendMessageBatch(com.amazonaws.services.sqs.model.SendMessageBatchRequest sendMessageBatchRequest)
  
  Delivers up to ten messages to the specified queue. This is a batch version of SendMessage. The result of the send action on each message is reported individually in the response. Uploads message payloads to Amazon S3 when necessary.
  
  If the DelaySeconds parameter is not specified for an entry, the default for the queue is used.
  
  IMPORTANT:The following list shows the characters (in Unicode) that are allowed in your message, according to the W3C XML specification. For more information, go to http://www.faqs.org/rfcs/rfc1321.html. If you send any characters that are not included in the list, your request will be rejected. #x9 | #xA | #xD | [#x20 to #xD7FF] | [#xE000 to #xFFFD] | [#x10000 to #x10FFFF]
  
  IMPORTANT: Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
  IMPORTANT: The input object may be modified by the method.
  
  NOTE:Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
  
  &Attribute.1=this
  
  &Attribute.2=that
  
  Specified by:
  
  sendMessageBatch in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  sendMessageBatchRequest - Container for the necessary parameters to execute the SendMessageBatch service method on AmazonSQS.
  
  Returns:
  
  The response from the SendMessageBatch service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.BatchEntryIdsNotDistinctException
  
  com.amazonaws.services.sqs.model.TooManyEntriesInBatchRequestException
  
  com.amazonaws.services.sqs.model.BatchRequestTooLongException
  
  UnsupportedOperationException
  
  com.amazonaws.services.sqs.model.InvalidBatchEntryIdException
  
  com.amazonaws.services.sqs.model.EmptyBatchRequestException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- sendMessageBatch
  
  public com.amazonaws.services.sqs.model.SendMessageBatchResult sendMessageBatch(String queueUrl, List<com.amazonaws.services.sqs.model.SendMessageBatchRequestEntry> entries)
  
  Delivers up to ten messages to the specified queue. This is a batch version of SendMessage. The result of the send action on each message is reported individually in the response. Uploads message payloads to Amazon S3 when necessary.
  
  If the DelaySeconds parameter is not specified for an entry, the default for the queue is used.
  
  IMPORTANT:The following list shows the characters (in Unicode) that are allowed in your message, according to the W3C XML specification. For more information, go to http://www.faqs.org/rfcs/rfc1321.html. If you send any characters that are not included in the list, your request will be rejected. #x9 | #xA | #xD | [#x20 to #xD7FF] | [#xE000 to #xFFFD] | [#x10000 to #x10FFFF]
  
  IMPORTANT: Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
  
  NOTE:Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
  
  &Attribute.1=this
  
  &Attribute.2=that
  
  Specified by:
  
  sendMessageBatch in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueUrl - The URL of the Amazon SQS queue to take action on.
  
  entries - A list of SendMessageBatchRequestEntry items.
  
  Returns:
  
  The response from the SendMessageBatch service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.BatchEntryIdsNotDistinctException
  
  com.amazonaws.services.sqs.model.TooManyEntriesInBatchRequestException
  
  com.amazonaws.services.sqs.model.BatchRequestTooLongException
  
  UnsupportedOperationException
  
  com.amazonaws.services.sqs.model.InvalidBatchEntryIdException
  
  com.amazonaws.services.sqs.model.EmptyBatchRequestException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- deleteMessageBatch
  
  public com.amazonaws.services.sqs.model.DeleteMessageBatchResult deleteMessageBatch(com.amazonaws.services.sqs.model.DeleteMessageBatchRequest deleteMessageBatchRequest)
  
  Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage. The result of the delete action on each message is reported individually in the response. Also deletes the message payloads from Amazon S3 when necessary.
  
  IMPORTANT: Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
  
  NOTE:Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
  
  &Attribute.1=this
  
  &Attribute.2=that
  
  Specified by:
  
  deleteMessageBatch in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  deleteMessageBatchRequest - Container for the necessary parameters to execute the DeleteMessageBatch service method on AmazonSQS.
  
  Returns:
  
  The response from the DeleteMessageBatch service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.BatchEntryIdsNotDistinctException
  
  com.amazonaws.services.sqs.model.TooManyEntriesInBatchRequestException
  
  com.amazonaws.services.sqs.model.InvalidBatchEntryIdException
  
  com.amazonaws.services.sqs.model.EmptyBatchRequestException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- deleteMessageBatch
  
  public com.amazonaws.services.sqs.model.DeleteMessageBatchResult deleteMessageBatch(String queueUrl, List<com.amazonaws.services.sqs.model.DeleteMessageBatchRequestEntry> entries)
  
  Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage. The result of the delete action on each message is reported individually in the response. Also deletes the message payloads from Amazon S3 when necessary.
  
  IMPORTANT: Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
  
  NOTE:Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
  
  &Attribute.1=this
  
  &Attribute.2=that
  
  Specified by:
  
  deleteMessageBatch in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueUrl - The URL of the Amazon SQS queue to take action on.
  
  entries - A list of receipt handles for the messages to be deleted.
  
  Returns:
  
  The response from the DeleteMessageBatch service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.BatchEntryIdsNotDistinctException
  
  com.amazonaws.services.sqs.model.TooManyEntriesInBatchRequestException
  
  com.amazonaws.services.sqs.model.InvalidBatchEntryIdException
  
  com.amazonaws.services.sqs.model.EmptyBatchRequestException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- changeMessageVisibilityBatch
  
  public com.amazonaws.services.sqs.model.ChangeMessageVisibilityBatchResult changeMessageVisibilityBatch(String queueUrl, List<com.amazonaws.services.sqs.model.ChangeMessageVisibilityBatchRequestEntry> entries)
  
  Simplified method form for invoking the ChangeMessageVisibilityBatch operation.
  Specified by:
  
  changeMessageVisibilityBatch in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueUrl - The URL of the Amazon SQS queue to take action on.
  
  entries - A list of receipt handles of the messages for which the visibility timeout must be changed.
  
  Returns:
  
  The response from the ChangeMessageVisibilityBatch service method, as returned by AmazonSQS.
  
  See Also:
  
  changeMessageVisibilityBatch(ChangeMessageVisibilityBatchRequest)
- changeMessageVisibilityBatch
  
  public com.amazonaws.services.sqs.model.ChangeMessageVisibilityBatchResult changeMessageVisibilityBatch(com.amazonaws.services.sqs.model.ChangeMessageVisibilityBatchRequest changeMessageVisibilityBatchRequest) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility. The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility requests with each ChangeMessageVisibilityBatch action.
  
  IMPORTANT:Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
  
  NOTE:Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
  
  &Attribute.1=this
  
  &Attribute.2=that
  
  Specified by:
  
  changeMessageVisibilityBatch in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  changeMessageVisibilityBatchRequest - Container for the necessary parameters to execute the ChangeMessageVisibilityBatch service method on AmazonSQS.
  
  Returns:
  
  The response from the ChangeMessageVisibilityBatch service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.BatchEntryIdsNotDistinctException
  
  com.amazonaws.services.sqs.model.TooManyEntriesInBatchRequestException
  
  com.amazonaws.services.sqs.model.InvalidBatchEntryIdException
  
  com.amazonaws.services.sqs.model.EmptyBatchRequestException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- purgeQueue
  
  public com.amazonaws.services.sqs.model.PurgeQueueResult purgeQueue(com.amazonaws.services.sqs.model.PurgeQueueRequest purgeQueueRequest) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Deletes the messages in a queue specified by the queue URL .
  
  IMPORTANT:When you use the PurgeQueue API, the deleted messages in the queue cannot be retrieved.
  
  IMPORTANT: This does not delete the message payloads from Amazon S3.
  
  When you purge a queue, the message deletion process takes up to 60 seconds. All messages sent to the queue before calling PurgeQueue will be deleted; messages sent to the queue while it is being purged may be deleted. While the queue is being purged, messages sent to the queue before PurgeQueue was called may be received, but will be deleted within the next minute.
  
  Specified by:
  
  purgeQueue in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  purgeQueueRequest - Container for the necessary parameters to execute the PurgeQueue service method on AmazonSQS.
  
  Returns:
  
  The response from the PurgeQueue service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- setQueueAttributes
  
  public com.amazonaws.services.sqs.model.SetQueueAttributesResult setQueueAttributes(com.amazonaws.services.sqs.model.SetQueueAttributesRequest setQueueAttributesRequest) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes.
  
  NOTE:Going forward, new attributes might be added. If you are writing code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
  
  Specified by:
  
  setQueueAttributes in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  setQueueAttributesRequest - Container for the necessary parameters to execute the SetQueueAttributes service method on AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.InvalidAttributeNameException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- getQueueUrl
  
  public com.amazonaws.services.sqs.model.GetQueueUrlResult getQueueUrl(com.amazonaws.services.sqs.model.GetQueueUrlRequest getQueueUrlRequest) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Returns the URL of an existing queue. This action provides a simple way to retrieve the URL of an Amazon SQS queue.
  
  To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or go to Shared Queues in the Amazon SQS Developer Guide .
  
  Specified by:
  
  getQueueUrl in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  getQueueUrlRequest - Container for the necessary parameters to execute the GetQueueUrl service method on AmazonSQS.
  
  Returns:
  
  The response from the GetQueueUrl service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.QueueDoesNotExistException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- removePermission
  
  public com.amazonaws.services.sqs.model.RemovePermissionResult removePermission(com.amazonaws.services.sqs.model.RemovePermissionRequest removePermissionRequest) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Revokes any permissions in the queue policy that matches the specified Label parameter. Only the owner of the queue can remove permissions.
  
  Specified by:
  
  removePermission in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  removePermissionRequest - Container for the necessary parameters to execute the RemovePermission service method on AmazonSQS.
  
  Throws:
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- getQueueAttributes
  
  public com.amazonaws.services.sqs.model.GetQueueAttributesResult getQueueAttributes(com.amazonaws.services.sqs.model.GetQueueAttributesRequest getQueueAttributesRequest) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  Gets attributes for the specified queue. The following attributes are supported:
  
  All - returns all values.
  
  ApproximateNumberOfMessages - returns the approximate number of visible messages in a queue. For more information, see Resources Required to Process Messages in the Amazon SQS Developer Guide .
  
  ApproximateNumberOfMessagesNotVisible - returns the approximate number of messages that are not timed-out and not deleted. For more information, see Resources Required to Process Messages in the Amazon SQS Developer Guide .
  
  VisibilityTimeout - returns the visibility timeout for the queue. For more information about visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide .
  
  CreatedTimestamp - returns the time when the queue was created (epoch time in seconds).
  
  LastModifiedTimestamp - returns the time when the queue was last changed (epoch time in seconds).
  
  Policy - returns the queue's policy.
  
  MaximumMessageSize - returns the limit of how many bytes a message can contain before Amazon SQS rejects it.
  
  MessageRetentionPeriod - returns the number of seconds Amazon SQS retains a message.
  
  QueueArn - returns the queue's Amazon resource name (ARN).
  
  ApproximateNumberOfMessagesDelayed - returns the approximate number of messages that are pending to be added to the queue.
  
  DelaySeconds - returns the default delay on the queue in seconds.
  
  ReceiveMessageWaitTimeSeconds - returns the time for which a ReceiveMessage call will wait for a message to arrive.
  
  RedrivePolicy - returns the parameters for dead letter queue functionality of the source queue. For more information about RedrivePolicy and dead letter queues, see Using Amazon SQS Dead Letter Queues in the Amazon SQS Developer Guide .
  
  NOTE:Going forward, new attributes might be added. If you are writing code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
  
  NOTE:Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
  
  &Attribute.1=this
  
  &Attribute.2=that
  Specified by:
  
  getQueueAttributes in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  getQueueAttributesRequest - Container for the necessary parameters to execute the GetQueueAttributes service method on AmazonSQS.
  
  Returns:
  
  The response from the GetQueueAttributes service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.InvalidAttributeNameException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- listDeadLetterSourceQueues
  
  public com.amazonaws.services.sqs.model.ListDeadLetterSourceQueuesResult listDeadLetterSourceQueues(com.amazonaws.services.sqs.model.ListDeadLetterSourceQueuesRequest listDeadLetterSourceQueuesRequest) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Returns a list of your queues that have the RedrivePolicy queue attribute configured with a dead letter queue.
  
  For more information about using dead letter queues, see Using Amazon SQS Dead Letter Queues .
  
  Specified by:
  
  listDeadLetterSourceQueues in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  listDeadLetterSourceQueuesRequest - Container for the necessary parameters to execute the ListDeadLetterSourceQueues service method on AmazonSQS.
  
  Returns:
  
  The response from the ListDeadLetterSourceQueues service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.QueueDoesNotExistException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- deleteQueue
  
  public com.amazonaws.services.sqs.model.DeleteQueueResult deleteQueue(com.amazonaws.services.sqs.model.DeleteQueueRequest deleteQueueRequest) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Deletes the queue specified by the queue URL , regardless of whether the queue is empty. If the specified queue does not exist, Amazon SQS returns a successful response.
  
  IMPORTANT: Use DeleteQueue with care; once you delete your queue, any messages in the queue are no longer available.
  
  When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after the 60 seconds, the queue and that message you sent no longer exist. Also, when you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
  
  We reserve the right to delete queues that have had no activity for more than 30 days. For more information, see How Amazon SQS Queues Work in the Amazon SQS Developer Guide .
  
  Specified by:
  
  deleteQueue in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  deleteQueueRequest - Container for the necessary parameters to execute the DeleteQueue service method on AmazonSQS.
  
  Throws:
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- listQueues
  
  public com.amazonaws.services.sqs.model.ListQueuesResult listQueues(com.amazonaws.services.sqs.model.ListQueuesRequest listQueuesRequest) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Returns a list of your queues. The maximum number of queues that can be returned is 1000. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name beginning with the specified value are returned.
  
  Specified by:
  
  listQueues in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  listQueuesRequest - Container for the necessary parameters to execute the ListQueues service method on AmazonSQS.
  
  Returns:
  
  The response from the ListQueues service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- createQueue
  
  public com.amazonaws.services.sqs.model.CreateQueueResult createQueue(com.amazonaws.services.sqs.model.CreateQueueRequest createQueueRequest) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Creates a new queue, or returns the URL of an existing one. When you request CreateQueue , you provide a name for the queue. To successfully create a new queue, you must provide a name that is unique within the scope of your own queues.
  
  NOTE: If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
  
  You may pass one or more attributes in the request. If you do not provide a value for any attribute, the queue will have the default value for that attribute. Permitted attributes are the same that can be set using SetQueueAttributes.
  
  NOTE: Use GetQueueUrl to get a queue's URL. GetQueueUrl requires only the QueueName parameter.
  
  If you provide the name of an existing queue, along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue. If the queue name, attribute names, or attribute values do not match an existing queue, CreateQueue returns an error.
  
  NOTE:Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
  
  &Attribute.1=this
  
  &Attribute.2=that
  
  Specified by:
  
  createQueue in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  createQueueRequest - Container for the necessary parameters to execute the CreateQueue service method on AmazonSQS.
  
  Returns:
  
  The response from the CreateQueue service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.QueueNameExistsException
  
  com.amazonaws.services.sqs.model.QueueDeletedRecentlyException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- addPermission
  
  public com.amazonaws.services.sqs.model.AddPermissionResult addPermission(com.amazonaws.services.sqs.model.AddPermissionRequest addPermissionRequest) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Adds a permission to a queue for a specific principal . This allows for sharing access to the queue.
  
  When you create a queue, you have full control access rights for the queue. Only you (as owner of the queue) can grant or deny permissions to the queue. For more information about these permissions, see Shared Queues in the Amazon SQS Developer Guide .
  
  NOTE: AddPermission writes an Amazon SQS-generated policy. If you want to write your own policy, use SetQueueAttributes to upload your policy. For more information about writing your own policy, see Using The Access Policy Language in the Amazon SQS Developer Guide.
  
  NOTE:Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
  
  &Attribute.1=this
  
  &Attribute.2=that
  
  Specified by:
  
  addPermission in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  addPermissionRequest - Container for the necessary parameters to execute the AddPermission service method on AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.OverLimitException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- listQueues
  
  public com.amazonaws.services.sqs.model.ListQueuesResult listQueues() throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Returns a list of your queues. The maximum number of queues that can be returned is 1000. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name beginning with the specified value are returned.
  
  Specified by:
  
  listQueues in interface com.amazonaws.services.sqs.AmazonSQS
  
  Returns:
  
  The response from the ListQueues service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- setQueueAttributes
  
  public com.amazonaws.services.sqs.model.SetQueueAttributesResult setQueueAttributes(String queueUrl, Map<String,String> attributes) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes.
  
  NOTE:Going forward, new attributes might be added. If you are writing code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
  Specified by:
  
  setQueueAttributes in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueUrl - The URL of the Amazon SQS queue to take action on.
  
  attributes - A map of attributes to set.
  The following lists the names, descriptions, and values of the special request parameters the SetQueueAttributes action uses:
  
  DelaySeconds - The time in seconds that the delivery of all messages in the queue will be delayed. An integer from 0 to 900 (15 minutes). The default for this attribute is 0 (zero).
  
  MaximumMessageSize - The limit of how many bytes a message can contain before Amazon SQS rejects it. An integer from 1024 bytes (1 KiB) up to 262144 bytes (256 KiB). The default for this attribute is 262144 (256 KiB).
  
  MessageRetentionPeriod - The number of seconds Amazon SQS retains a message. Integer representing seconds, from 60 (1 minute) to 1209600 (14 days). The default for this attribute is 345600 (4 days).
  
  Policy - The queue's policy. A valid AWS policy. For more information about policy structure, see Overview of AWS IAM Policies in the Amazon IAM User Guide.
  
  ReceiveMessageWaitTimeSeconds - The time for which a ReceiveMessage call will wait for a message to arrive. An integer from 0 to 20 (seconds). The default for this attribute is 0.
  
  VisibilityTimeout - The visibility timeout for the queue. An integer from 0 to 43200 (12 hours). The default for this attribute is 30. For more information about visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide.
  
  RedrivePolicy - The parameters for dead letter queue functionality of the source queue. For more information about RedrivePolicy and dead letter queues, see Using Amazon SQS Dead Letter Queues in the Amazon SQS Developer Guide.
  
  Returns:
  
  The response from the SetQueueAttributes service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.InvalidAttributeNameException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- getQueueUrl
  
  public com.amazonaws.services.sqs.model.GetQueueUrlResult getQueueUrl(String queueName) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Returns the URL of an existing queue. This action provides a simple way to retrieve the URL of an Amazon SQS queue.
  
  To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or go to Shared Queues in the Amazon SQS Developer Guide .
  
  Specified by:
  
  getQueueUrl in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueName - The name of the queue whose URL must be fetched. Maximum 80 characters; alphanumeric characters, hyphens (-), and underscores (_) are allowed.
  
  Returns:
  
  The response from the GetQueueUrl service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.QueueDoesNotExistException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- removePermission
  
  public com.amazonaws.services.sqs.model.RemovePermissionResult removePermission(String queueUrl, String label) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Revokes any permissions in the queue policy that matches the specified Label parameter. Only the owner of the queue can remove permissions.
  
  Specified by:
  
  removePermission in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueUrl - The URL of the Amazon SQS queue to take action on.
  
  label - The identification of the permission to remove. This is the label added with the AddPermission action.
  
  Returns:
  
  The response from the RemovePermission service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- getQueueAttributes
  
  public com.amazonaws.services.sqs.model.GetQueueAttributesResult getQueueAttributes(String queueUrl, List<String> attributeNames) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  Gets attributes for the specified queue. The following attributes are supported:
  
  All - returns all values.
  
  ApproximateNumberOfMessages - returns the approximate number of visible messages in a queue. For more information, see Resources Required to Process Messages in the Amazon SQS Developer Guide .
  
  ApproximateNumberOfMessagesNotVisible - returns the approximate number of messages that are not timed-out and not deleted. For more information, see Resources Required to Process Messages in the Amazon SQS Developer Guide .
  
  VisibilityTimeout - returns the visibility timeout for the queue. For more information about visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide .
  
  CreatedTimestamp - returns the time when the queue was created (epoch time in seconds).
  
  LastModifiedTimestamp - returns the time when the queue was last changed (epoch time in seconds).
  
  Policy - returns the queue's policy.
  
  MaximumMessageSize - returns the limit of how many bytes a message can contain before Amazon SQS rejects it.
  
  MessageRetentionPeriod - returns the number of seconds Amazon SQS retains a message.
  
  QueueArn - returns the queue's Amazon resource name (ARN).
  
  ApproximateNumberOfMessagesDelayed - returns the approximate number of messages that are pending to be added to the queue.
  
  DelaySeconds - returns the default delay on the queue in seconds.
  
  ReceiveMessageWaitTimeSeconds - returns the time for which a ReceiveMessage call will wait for a message to arrive.
  
  RedrivePolicy - returns the parameters for dead letter queue functionality of the source queue. For more information about RedrivePolicy and dead letter queues, see Using Amazon SQS Dead Letter Queues in the Amazon SQS Developer Guide .
  
  NOTE:Going forward, new attributes might be added. If you are writing code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
  
  NOTE:Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
  
  &Attribute.1=this
  
  &Attribute.2=that
  Specified by:
  
  getQueueAttributes in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueUrl - The URL of the Amazon SQS queue to take action on.
  
  attributeNames - A list of attributes to retrieve information for.
  
  Returns:
  
  The response from the GetQueueAttributes service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.InvalidAttributeNameException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- deleteQueue
  
  public com.amazonaws.services.sqs.model.DeleteQueueResult deleteQueue(String queueUrl) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Deletes the queue specified by the queue URL , regardless of whether the queue is empty. If the specified queue does not exist, Amazon SQS returns a successful response.
  
  IMPORTANT: Use DeleteQueue with care; once you delete your queue, any messages in the queue are no longer available.
  
  When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after the 60 seconds, the queue and that message you sent no longer exist. Also, when you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
  
  We reserve the right to delete queues that have had no activity for more than 30 days. For more information, see How Amazon SQS Queues Work in the Amazon SQS Developer Guide .
  
  Specified by:
  
  deleteQueue in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueUrl - The URL of the Amazon SQS queue to take action on.
  
  Returns:
  
  The response from the DeleteQueue service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- listQueues
  
  public com.amazonaws.services.sqs.model.ListQueuesResult listQueues(String queueNamePrefix) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Returns a list of your queues. The maximum number of queues that can be returned is 1000. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name beginning with the specified value are returned.
  
  Specified by:
  
  listQueues in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueNamePrefix - A string to use for filtering the list results. Only those queues whose name begins with the specified string are returned.
  
  Returns:
  
  The response from the ListQueues service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- createQueue
  
  public com.amazonaws.services.sqs.model.CreateQueueResult createQueue(String queueName) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Creates a new queue, or returns the URL of an existing one. When you request CreateQueue , you provide a name for the queue. To successfully create a new queue, you must provide a name that is unique within the scope of your own queues.
  
  NOTE: If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
  
  You may pass one or more attributes in the request. If you do not provide a value for any attribute, the queue will have the default value for that attribute. Permitted attributes are the same that can be set using SetQueueAttributes.
  
  NOTE: Use GetQueueUrl to get a queue's URL. GetQueueUrl requires only the QueueName parameter.
  
  If you provide the name of an existing queue, along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue. If the queue name, attribute names, or attribute values do not match an existing queue, CreateQueue returns an error.
  
  NOTE:Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
  
  &Attribute.1=this
  
  &Attribute.2=that
  
  Specified by:
  
  createQueue in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueName - The name for the queue to be created.
  
  Returns:
  
  The response from the CreateQueue service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.QueueNameExistsException
  
  com.amazonaws.services.sqs.model.QueueDeletedRecentlyException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- addPermission
  
  public com.amazonaws.services.sqs.model.AddPermissionResult addPermission(String queueUrl, String label, List<String> aWSAccountIds, List<String> actions) throws com.amazonaws.AmazonServiceException, com.amazonaws.AmazonClientException
  
  Adds a permission to a queue for a specific principal . This allows for sharing access to the queue.
  
  When you create a queue, you have full control access rights for the queue. Only you (as owner of the queue) can grant or deny permissions to the queue. For more information about these permissions, see Shared Queues in the Amazon SQS Developer Guide .
  
  NOTE: AddPermission writes an Amazon SQS-generated policy. If you want to write your own policy, use SetQueueAttributes to upload your policy. For more information about writing your own policy, see Using The Access Policy Language in the Amazon SQS Developer Guide.
  
  NOTE:Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
  
  &Attribute.1=this
  
  &Attribute.2=that
  
  Specified by:
  
  addPermission in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  queueUrl - The URL of the Amazon SQS queue to take action on.
  
  label - The unique identification of the permission you're setting (e.g., AliceSendMessage). Constraints: Maximum 80 characters; alphanumeric characters, hyphens (-), and underscores (_) are allowed.
  
  aWSAccountIds - The AWS account number of the principal who will be given permission. The principal must have an AWS account, but does not need to be signed up for Amazon SQS. For information about locating the AWS account identification, see Your AWS Identifiers in the Amazon SQS Developer Guide.
  
  actions - The action the client wants to allow for the specified principal. The following are valid values: * | SendMessage | ReceiveMessage | DeleteMessage | ChangeMessageVisibility | GetQueueAttributes | GetQueueUrl. For more information about these actions, see Understanding Permissions in the Amazon SQS Developer Guide.
  Specifying SendMessage, DeleteMessage, or ChangeMessageVisibility for the ActionName.n also grants permissions for the corresponding batch versions of those actions: SendMessageBatch, DeleteMessageBatch , and ChangeMessageVisibilityBatch.
  
  Returns:
  
  The response from the AddPermission service method, as returned by AmazonSQS.
  
  Throws:
  
  com.amazonaws.services.sqs.model.OverLimitException
  
  com.amazonaws.AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  
  com.amazonaws.AmazonServiceException - If an error response is returned by AmazonSQS indicating either a problem with the data in the request, or a server side issue.
- getCachedResponseMetadata
  
  public com.amazonaws.ResponseMetadata getCachedResponseMetadata(com.amazonaws.AmazonWebServiceRequest request)
  
  Returns additional metadata for a previously executed successful, request, typically used for debugging issues where a service isn't acting as expected. This data isn't considered part of the result data returned by an operation, so it's available through this separate, diagnostic interface.
  Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic information for an executed request, you should use this method to retrieve it as soon as possible after executing the request.
  
  Specified by:
  
  getCachedResponseMetadata in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  request - The originally executed request
  
  Returns:
  
  The response metadata for the specified request, or null if none is available.
- setEndpoint
  
  public void setEndpoint(String endpoint) throws IllegalArgumentException
  
  Overrides the default endpoint for this client ("sqs.us-east-1.amazonaws.com"). Callers can use this method to control which AWS region they want to work with.
  Callers can pass in just the endpoint (ex: "sqs.us-east-1.amazonaws.com") or a full URL, including the protocol (ex: "sqs.us-east-1.amazonaws.com"). If the protocol is not specified here, the default protocol from this client's ClientConfiguration will be used, which by default is HTTPS.
  For more information on using AWS regions with the AWS SDK for Java, and a complete list of all available endpoints for all AWS services, see: http://developer.amazonwebservices.com/connect/entry.jspa?externalID=3912
  This method is not threadsafe. An endpoint should be configured when the client is created and before any service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit or retrying.
  
  Specified by:
  
  setEndpoint in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  endpoint - The endpoint (ex: "sqs.us-east-1.amazonaws.com") or a full URL, including the protocol (ex: "sqs.us-east-1.amazonaws.com") of the region specific AWS endpoint this client will communicate with.
  
  Throws:
  
  IllegalArgumentException - If any problems are detected with the specified endpoint.
- setRegion
  
  public void setRegion(com.amazonaws.regions.Region region) throws IllegalArgumentException
  
  An alternative to AmazonSQS.setEndpoint(String), sets the regional endpoint for this client's service calls. Callers can use this method to control which AWS region they want to work with.
  By default, all service endpoints in all regions use the https protocol. To use http instead, specify it in the ClientConfiguration supplied at construction.
  This method is not threadsafe. A region should be configured when the client is created and before any service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit or retrying.
  Specified by:
  
  setRegion in interface com.amazonaws.services.sqs.AmazonSQS
  
  Parameters:
  
  region - The region this client will communicate with. See Region.getRegion(com.amazonaws.regions.Regions) for accessing a given region.
  
  Throws:
  
  IllegalArgumentException - If the given region is null, or if this service isn't available in the given region. See Region.isServiceSupported(String)
  
  See Also:
  
  Region.getRegion(com.amazonaws.regions.Regions)
  
  Region.createClient(Class, AWSCredentialsProvider, ClientConfiguration)
- shutdown
  
  public void shutdown()
  
  Shuts down this client object, releasing any resources that might be held open. This is an optional method, and callers are not expected to call it, but can if they want to explicitly release any open resources. Once a client has been shutdown, it should not be used to make any more requests.
  
  Specified by:
  
  shutdown in interface com.amazonaws.services.sqs.AmazonSQS
- listQueueTags
  
  public com.amazonaws.services.sqs.model.ListQueueTagsResult listQueueTags(com.amazonaws.services.sqs.model.ListQueueTagsRequest listQueueTagsRequest)
  
  Specified by:
  
  listQueueTags in interface com.amazonaws.services.sqs.AmazonSQS
- listQueueTags
  
  public com.amazonaws.services.sqs.model.ListQueueTagsResult listQueueTags(String queueUrl)
  
  Specified by:
  
  listQueueTags in interface com.amazonaws.services.sqs.AmazonSQS
- tagQueue
  
  public com.amazonaws.services.sqs.model.TagQueueResult tagQueue(com.amazonaws.services.sqs.model.TagQueueRequest tagQueueRequest)
  
  Specified by:
  
  tagQueue in interface com.amazonaws.services.sqs.AmazonSQS
- tagQueue
  
  public com.amazonaws.services.sqs.model.TagQueueResult tagQueue(String queueUrl, Map<String,String> tags)
  
  Specified by:
  
  tagQueue in interface com.amazonaws.services.sqs.AmazonSQS
- untagQueue
  
  public com.amazonaws.services.sqs.model.UntagQueueResult untagQueue(com.amazonaws.services.sqs.model.UntagQueueRequest untagQueueRequest)
  
  Specified by:
  
  untagQueue in interface com.amazonaws.services.sqs.AmazonSQS
- untagQueue
  
  public com.amazonaws.services.sqs.model.UntagQueueResult untagQueue(String queueUrl, List<String> tagKeys)
  
  Specified by:
  
  untagQueue in interface com.amazonaws.services.sqs.AmazonSQS
- startMessageMoveTask
  
  public com.amazonaws.services.sqs.model.StartMessageMoveTaskResult startMessageMoveTask(com.amazonaws.services.sqs.model.StartMessageMoveTaskRequest startMessageMoveTaskRequest)
  
  Specified by:
  
  startMessageMoveTask in interface com.amazonaws.services.sqs.AmazonSQS
- listMessageMoveTasks
  
  public com.amazonaws.services.sqs.model.ListMessageMoveTasksResult listMessageMoveTasks(com.amazonaws.services.sqs.model.ListMessageMoveTasksRequest listMessageMoveTasksRequest)
  
  Specified by:
  
  listMessageMoveTasks in interface com.amazonaws.services.sqs.AmazonSQS
- cancelMessageMoveTask
  
  public com.amazonaws.services.sqs.model.CancelMessageMoveTaskResult cancelMessageMoveTask(com.amazonaws.services.sqs.model.CancelMessageMoveTaskRequest cancelMessageMoveTaskRequest)
  
  Specified by:
  
  cancelMessageMoveTask in interface com.amazonaws.services.sqs.AmazonSQS

Class AmazonSQSExtendedClient

Field Summary

Fields inherited from interface com.amazonaws.services.sqs.AmazonSQS

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Methods inherited from interface com.amazonaws.services.sqs.AmazonSQS

Constructor Details

AmazonSQSExtendedClient

AmazonSQSExtendedClient

Method Details

sendMessage

sendMessage

receiveMessage

receiveMessage

deleteMessage

deleteMessage

changeMessageVisibility

changeMessageVisibility

sendMessageBatch

sendMessageBatch

deleteMessageBatch

deleteMessageBatch

changeMessageVisibilityBatch

changeMessageVisibilityBatch

purgeQueue

setQueueAttributes

getQueueUrl

removePermission

getQueueAttributes

listDeadLetterSourceQueues

deleteQueue

listQueues

createQueue

addPermission

listQueues

setQueueAttributes

getQueueUrl

removePermission

getQueueAttributes

deleteQueue

listQueues

createQueue

addPermission

getCachedResponseMetadata

setEndpoint

setRegion

shutdown

listQueueTags

listQueueTags

tagQueue

tagQueue

untagQueue

untagQueue

startMessageMoveTask

listMessageMoveTasks

cancelMessageMoveTask